PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6RY1703-1HD06
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6RY1703-1HD06 Power interface replacement board
Siemens 6RY1703-1HD06 is a Power interface replacement board for the SIMOVERT DC drive repair parts. It is used to connects converter command circuits. Confirm the complete article number, installed drive, electrical class, interfaces and cooling arrangement before ordering.
BEFORE YOU BUY
Confirm the complete Power interface replacement board
ACTUAL APPLICATIONS
Application context for 6RY1703-1HD06
Manufacturer documentation places the Power Interface Board in practical drive applications. The three cases below describe different operating tasks in which 6RY1703-1HD06 performs its documented product-family role with the configured companion equipment.
-
01 · MACHINERY MANUFACTURING
Verify machine-tool automation with Power Interface
At the control layer of the spindles, axes and tool changers, 6RY1703-1HD06 provides its specified system function as a Power Interface Board. During cycle start, the system uses this function to coordinate the equipment states required by the active cycle, helping it complete the machining step with traceable status. -
02 · AUTOMOTIVE
Support paint-shop conveying with Power Interface
Across the carrier tracking and booth interfaces, 6RY1703-1HD06 operates in its approved product-family role as a Power Interface Board. During carrier accumulation, the system uses this function to route carriers by production status, helping it preserve body order through the process. -
03 · WATER & WASTEWATER
Regulate high-lift pump speed with Power Interface
During operation of the pump motors, discharge headers and pressure loops, 6RY1703-1HD06 serves its documented function as a Power Interface Board. During demand increase, the system uses this function to adjust motor speed from the process demand signal, helping it maintain the required pressure with less throttling.
Technical specifications for 6RY1703-1HD06
-
Product Model6RY1703-1HD06
-
Product ParametersPower interface replacement board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassPower interface replacement
-
Drive FamilySIMOVERT DC drives
-
Primary FunctionConnects converter command circuits
-
Power ArchitectureDC-drive power interface stage
-
Voltage Class120–480 V AC system class
-
Current Rating100 A application path
-
Control Supply24 V DC auxiliary input
-
Power SectionPower-interface electronics bay
-
Mechanical DesignC98043-A7022-L4-6 board set
-
Electrical InterfaceRelay and signal connectors
-
Cooling IntegrationConverter cabinet air path
-
Board Designation6RY1703-1HD06 spare item
-
Service RoleExact DC-drive replacement
-
Product StatusLegacy Siemens service part
-
Commissioning CheckMatch C98043 board association
View all additional
Alternative Names
6RY1703 1HD06
SIMOVERT DC drive repair parts Power interface replacement board
Siemens Power interface replacement board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6RY1703-1HD06 to the installed SIMOVERT DC drive repair parts
Siemens 6RY1703-1HD06 is a Power interface replacement board used in the SIMOVERT DC drive repair parts.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: 6RY1703-1HD06
- Product class: Power interface replacement board
- Family: SIMOVERT DC drive repair parts
The Siemens 6RY1703-1HD06 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6RY1703-1HD06 identity before exchange
Replace 6RY1703-1HD06 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact 6RY1703-1HD06 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens 6RY1703-1HD06 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6RY1703-1HD06
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6RY1703-1HD06 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size26 × 23 × 3.5 cm
-
Shipping weight0.82 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6RY1703-1HD06
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What type of Siemens spare is 6RY1703-1HD06?
It is a power-interface replacement used with the documented SIMOVERT DC-drive electronics. -
Which C98043 assembly helps identify this item?
C98043-A7022-L4-6 is the associated board designation that should be verified on the installed hardware. -
Why are both service numbers needed on a quotation?
Together they reduce the risk of supplying a similar interface with different circuitry or connector assignment. -
What control voltage should be present at the interface?
Confirm the 24 V DC auxiliary input and its permitted tolerance using the drive schematic. -
Which relay loads require review before replacement?
Record the connected contact circuits, especially any loads approaching the board’s documented AC relay rating. -
How should legacy DC-drive wiring be documented?
Use labelled photographs and terminal records because field modifications may not appear in the original drawing. -
What prevents accidental cross-connection on 6RY1703-1HD06?
Match plug keying, wire numbers, board-side labels and the original routing before applying power. -
Which functions are tested at commissioning?
Prove auxiliary supply, converter enable, relay responses, feedback signals and a controlled motor operating point.
READY TO VERIFY YOUR PART?
Get a 6RY1703-1HD06 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
