PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- C98043-A7022-L4-6
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
C98043-A7022-L4-6 Power interface circuit board
Siemens C98043-A7022-L4-6 is a Power interface circuit board in the Siemens SIMOVERT. It is used to connect compatible components and transfer the specified control or signal data.
Its documented configuration includes component class of Power interface board, drive family of SIMOVERT DC drives, primary function of Routes control and power signals, and power architecture of Converter interface electronics. During operation, the Power interface circuit board performs its assigned Power interface circuit board function through the documented power, signal and communication interfaces.
Its documented configuration includes component class of Power interface board, drive family of SIMOVERT DC drives, primary function of Routes control and power signals, and power architecture of Converter interface electronics. During operation, the Power interface circuit board performs its assigned Power interface circuit board function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete Power interface circuit board
ACTUAL APPLICATIONS
Application context for C98043-A7022-L4-6
Manufacturer documentation places the Power Interface Circuit Board in practical drive applications. The three cases below describe different operating tasks in which C98043-A7022-L4-6 performs its documented product-family role with the configured companion equipment.
-
01 · OIL & GAS
Synchronize loading-pump operation during transfer-rate adjustment
In the automation chain for the transfer pumps, flow meters and loading headers, C98043-A7022-L4-6 serves its documented function as a Power Interface Circuit Board. During transfer-rate adjustment, the system uses this function to regulate pump speed from the transfer target, helping it keep product flow inside the agreed operating range. -
02 · MACHINERY MANUFACTURING
Track test-stand control with Power Interface
Across the load actuators and measurement channels, C98043-A7022-L4-6 serves its documented function as a Power Interface Circuit Board. During test-point transition, the system uses this function to move the test article through commanded operating points, helping it capture comparable results at each condition. -
03 · PULP & PAPER
Synchronize paper-machine draws with Power Interface
For the coordinated operation of the press rolls and sectional drives, C98043-A7022-L4-6 serves its documented function as a Power Interface Circuit Board. During sheet threading, the system uses this function to maintain speed ratios between machine sections, helping it protect sheet tension during acceleration.
Technical specifications for C98043-A7022-L4-6
-
Product ModelC98043-A7022-L4-6
-
Product ParametersPower interface circuit board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassPower interface board
-
Drive FamilySIMOVERT DC drives
-
Primary FunctionRoutes control and power signals
-
Power ArchitectureConverter interface electronics
-
Voltage Class120–480 V AC circuits
-
Current RatingUp to 100 A path
-
Control Supply24 V DC ±15% input
-
Power SectionPower-control interface section
-
Mechanical DesignIndustrial printed-circuit board
-
Electrical Interface10 A / 250 V AC relays
-
Cooling IntegrationNatural cabinet air cooling
-
Board DesignationC98043-A7022-L4-6 assembly
-
Service Role6RY1703 interface partner
-
Product StatusLegacy Siemens service part
-
Commissioning CheckVerify 12/24 V secondary outputs
View all additional
Alternative Names
C98043 A7022 L4 6
SIMOVERT DC drive repair parts Power interface circuit board
Siemens Power interface circuit board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match C98043-A7022-L4-6 to the installed SIMOVERT DC drive repair parts
Siemens C98043-A7022-L4-6 is a Power interface circuit board used in the SIMOVERT DC drive repair parts.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: C98043-A7022-L4-6
- Product class: Power interface circuit board
- Family: SIMOVERT DC drive repair parts
The Siemens C98043-A7022-L4-6 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete C98043-A7022-L4-6 identity before exchange
Replace C98043-A7022-L4-6 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact C98043-A7022-L4-6 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens C98043-A7022-L4-6 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for C98043-A7022-L4-6
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens C98043-A7022-L4-6 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size26 × 23 × 3.5 cm
-
Shipping weight0.82 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about C98043-A7022-L4-6
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What circuits meet on C98043-A7022-L4-6?
This interface board brings together converter control signals, relay paths and the associated power-interface connections. -
Which AC range may be present around the A7022 board?
The recorded application spans 120–480 V AC circuits, so isolation must be proven before handling. -
What tolerance applies to its 24 V DC input?
The auxiliary input is identified as 24 V DC with a ±15% tolerance. -
How are the 10 A relay outputs checked?
Confirm contact assignment and load condition for the documented 250 V AC, 10 A relay rating. -
What secondary voltages may be associated with this interface?
The fitted assembly may use 12 V or 24 V DC secondary circuits; verify the cabinet drawing. -
Why should 6RY1703-1HD06 be recorded with this board?
It is an associated Siemens service identifier and helps confirm the correct DC-drive interface assembly. -
What must be labelled before the A7022 board is withdrawn?
Mark every relay, supply and signal plug and record jumper or switch positions visible on the original board. -
How is the interface proven after refitting?
Test auxiliary power, relay operation, isolated signals and the controlled converter sequence before full service.
READY TO VERIFY YOUR PART?
Get a C98043-A7022-L4-6 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
-
200350-02-00-01GENERAL PURPOSE PIEZOELECTRIC ACCELEROMETERManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
