PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SE7024-7TD84-1HF4
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7024-7TD84-1HF4 PEU4 power board
Siemens 6SE7024-7TD84-1HF4 is a PEU4 power board used in the SIMOVERT MASTERDRIVES. It controls the converter output semiconductor stage and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 510–650 V DC link, 47 A output class, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 510–650 V DC link, 47 A output class, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete PEU4 power board
ACTUAL APPLICATIONS
Where 6SE7024-7TD84-1HF4 Fits Across Major Industry Sectors
Uses span metalworking, logistics and paper, subject to verified compatibility, operating conditions and project requirements.
-
01 · METALS & WIRE
Industrial Metal Processing and Commercial Wire Manufacturing
Metal processing and rolling for industrial materials manufacturing operations.Wire and cable production within the metal processing industry. -
02 · TRANSPORT & LOGISTICS
Rail Freight Handling and Industrial Lifting Operations
Rail freight transportation and cargo handling within logistics operations.Industrial material handling and lifting for goods movement operations. -
03 · PULP & PAPER
Pulp Manufacturing and Commercial Packaging Paperboard Production
Pulp manufacturing and fiber preparation for commercial papermaking operations.Paperboard production and finishing for commercial packaging material supply.
Technical specifications for 6SE7024-7TD84-1HF4
-
Product Model6SE7024-7TD84-1HF4
-
Product ParametersPEU4 power board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassPEU4 power board
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionControls the converter output semiconductor stage
-
Power ArchitecturePEU4 inverter electronics
-
Voltage Class510–650 V DC link
-
Current Rating47 A output class
-
Power SectionInverter power section
-
Mechanical DesignLong-format power board
-
Electrical InterfacePower-stage and feedback connectors
-
Commissioning CheckCheck switching, current feedback and insulation
View all additional
Alternative Names
6SE7024 7TD84 1HF4
SIMOVERT MASTERDRIVES PEU4 power board
Siemens 47 A PEU4 board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SE7024-7TD84-1HF4 to the installed SIMOVERT MASTERDRIVES
Siemens 6SE7024-7TD84-1HF4 is a PEU4 power board used in the SIMOVERT MASTERDRIVES to control the converter output semiconductor stage. Its peu4 inverter electronics role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 510–650 V DC link, 47 A output class, the inverter power section, long-format power board and power-stage and feedback connectors. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete check switching, current feedback and insulation, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6SE7024-7TD84-1HF4
- Function: Controls the converter output semiconductor stage
- Family: SIMOVERT MASTERDRIVES
The Siemens 6SE7024-7TD84-1HF4 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SE7024-7TD84-1HF4 identity before exchange
Treat 6SE7024-7TD84-1HF4 as a configuration-specific PEU4 power board for the SIMOVERT MASTERDRIVES. Match the complete Siemens article number, installed inverter power section, board or module revision, mechanical design and approved replacement record before removal.
Photograph power-stage and feedback connectors, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented long-format power board and any cooling or discharge provisions while the drive is isolated.
After installation, check switching, current feedback and insulation. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: 6SE7024-7TD84-1HF4
- Installed section: Inverter power section
- Release check: Check switching, current feedback and insulation
The Siemens 6SE7024-7TD84-1HF4 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for 6SE7024-7TD84-1HF4
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SE7024-7TD84-1HF4 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size65.5 × 30 × 3 cm
-
Shipping weight0.88 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7024-7TD84-1HF4
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which documented task requires the 47 A PEU4 board?
6SE7024-7TD84-1HF4 is applied to controls the converter output semiconductor stage in the SIMOVERT MASTERDRIVES; verify the installed inverter power section first. -
How is the 510–650 V DC link class checked for the 47 A PEU4 board?
Compare the complete 6SE7024-7TD84-1HF4 identifier, drive nameplate, DC-link or supply data and the applicable Siemens manual. -
What distinguishes the 47 A converter output configuration?
Match 47 A output class, long-format power board and the controlled hardware arrangement rather than appearance alone. -
Which records preserve the HF4 hardware match setup?
Photograph power-stage and feedback connectors, connector keys, cable labels, grounding, adjacent parts and revision before removing 6SE7024-7TD84-1HF4. -
What isolation step protects the 47 A PEU4 board?
Apply site lockout, wait the Siemens discharge time, prove absence of voltage and use ESD controls before handling 6SE7024-7TD84-1HF4. -
What arrival inspection applies to 47 A converter output?
Check the 6SE7024-7TD84-1HF4 label, suffix, connectors, coating, mechanical damage, contamination and protective packing before installation. -
How is the phase-current test result accepted?
Check switching, current feedback and insulation. Record diagnostics and the controlled functional result before release. -
What quotation details identify the 47 A PEU4 board?
Send the full 6SE7024-7TD84-1HF4 label, installed inverter power section, interface photos, quantity, fault symptoms and destination.
READY TO VERIFY YOUR PART?
Get a 6SE7024-7TD84-1HF4 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
