PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SE7090-0XX84-0AD5
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7090-0XX84-0AD5 motion control performance board
Siemens 6SE7090-0XX84-0AD5 is a motion control performance board in the SIMOVERT MASTERDRIVES. It is used to perform the documented motion control performance board function in the installed automation equipment.
Its documented configuration includes control unit of CUPM, performance class of Motion Control Performance 2, drive platform of SIMOVERT MASTERDRIVES, and main processor of C167 at 40 MHz. During operation, the motion control performance board performs its assigned motion control performance board function through the documented power, signal and communication interfaces.
Its documented configuration includes control unit of CUPM, performance class of Motion Control Performance 2, drive platform of SIMOVERT MASTERDRIVES, and main processor of C167 at 40 MHz. During operation, the motion control performance board performs its assigned motion control performance board function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete motion control performance board
ACTUAL APPLICATIONS
Application context for 6SE7090-0XX84-0AD5
The applications below show typical industry settings, application scenarios, application areas and equipment for 6SE7090-0XX84-0AD5. Confirm the exact SIMOVERT MASTERDRIVES configuration before use.
-
01 · MACHINE BUILDING
Variable-speed machine drive applications
Driven equipmentConveyor and feeder motorsPositioning and indexing axes -
02 · MINING & METALS
Conveyor and mill drive applications
Production equipmentOre conveyors and crushersRolling-mill auxiliary motors -
03 · WATER & WASTEWATER
Pump and blower drive applications
Utility equipmentRaw-water intake pumpsAeration blowers and dosing pumps
Technical specifications for 6SE7090-0XX84-0AD5
-
Product Model6SE7090-0XX84-0AD5
-
Product Parametersmotion control performance board
-
In stock1 unit
-
ManufacturerSiemens
-
Control UnitCUPM
-
Performance ClassMotion Control Performance 2
-
Drive PlatformSIMOVERT MASTERDRIVES
-
Main ProcessorC167 at 40 MHz
-
DSP ArchitectureHigh-speed bus and cache
-
Control ModeMotion control
-
Application FormatCompact and chassis units
-
Hardware GenerationMC Performance 2
View all additional
Alternative Names
6SE7090-0XX84-0AD5
6SE7090 0XX84 0AD5
SIMOVERT MASTERDRIVES motion control performance board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6SE7090-0XX84-0AD5 to the installed SIMOVERT MASTERDRIVES
Siemens 6SE7090-0XX84-0AD5 is a motion control performance board for the SIMOVERT MASTERDRIVES. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare main processor (C167 at 40 MHz), dsp architecture (High-speed bus and cache) and control mode (Motion control) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 6SE7090-0XX84-0AD5
- Product class: motion control performance board
- Family: SIMOVERT MASTERDRIVES
The Siemens 6SE7090-0XX84-0AD5 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6SE7090-0XX84-0AD5 identity before exchange
Replace 6SE7090-0XX84-0AD5 only after matching the complete article code, motion control performance board, installed SIMOVERT MASTERDRIVES role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 6SE7090-0XX84-0AD5
- Product class: motion control performance board
- Family check: SIMOVERT MASTERDRIVES
The Siemens 6SE7090-0XX84-0AD5 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SE7090-0XX84-0AD5
- Product family: SIMOVERT MASTERDRIVES
- Exact Siemens identity required before service
Documentation for Siemens 6SE7090-0XX84-0AD5 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size25.0 x 22.0 x 8.0 cm
-
Shipping weight0.90 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8504409999
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7090-0XX84-0AD5
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which control unit confirms the correct 6SE7090-0XX84-0AD5?
Match the complete 6SE7090-0XX84-0AD5 label and verify control unit is CUPM before accepting the motion control performance board. -
What must engineering check around performance class?
For 6SE7090-0XX84-0AD5, compare performance class (Motion Control Performance 2) with the installed wiring, host hardware and controlled project. -
Can another SIMOVERT MASTERDRIVES article replace this unit?
Do not select a substitute from appearance alone. Compare 6SE7090-0XX84-0AD5, control unit, performance class, connectors, firmware and the saved configuration. -
Which records protect the existing drive platform setup?
Before removing 6SE7090-0XX84-0AD5, photograph labels and connections, then save configuration evidence associated with drive platform (SIMOVERT MASTERDRIVES). -
How should the motion control performance board be inspected on arrival?
Inspect 6SE7090-0XX84-0AD5 for the exact article marking, connector damage, bent hardware, missing accessories and transport damage before disturbing the installed spare. -
Which functional test follows the 6SE7090-0XX84-0AD5 exchange?
Restore the approved setup, review diagnostics and test the affected SIMOVERT MASTERDRIVES signal, network, control or drive path at a safe operating point. -
What data should a distributor quote for this configuration?
Provide 6SE7090-0XX84-0AD5, quantity, nameplate photographs, installed SIMOVERT MASTERDRIVES system, required interfaces and destination country. -
How can MRO avoid receiving the wrong hardware revision?
Ask the supplier to confirm the full 6SE7090-0XX84-0AD5 identity, visible revision, control unit and connector layout against photographs before shipment.
READY TO VERIFY YOUR PART?
Get a 6SE7090-0XX84-0AD5 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
