PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6RY1803-0DB02
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6RY1803-0DB02 L05 power interface module
Siemens 6RY1803-0DB02 is a L05 power interface module in the SINAMICS DCM. It is used to connect compatible components and transfer the specified control or signal data.
Its documented configuration includes component class of L05 power interface module, drive family of SINAMICS DCM, primary function of Monitors converter power interface, and power architecture of L05 DC-drive interface option. During operation, the L05 power interface module performs its assigned L05 power interface module function through the documented power, signal and communication interfaces.
Its documented configuration includes component class of L05 power interface module, drive family of SINAMICS DCM, primary function of Monitors converter power interface, and power architecture of L05 DC-drive interface option. During operation, the L05 power interface module performs its assigned L05 power interface module function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete L05 power interface module
ACTUAL APPLICATIONS
Where 6RY1803-0DB02 Fits Across Major Industry Sectors
Uses span wood, automotive and logistics, subject to verified compatibility, operating conditions and project requirements.
-
01 · WOOD PROCESSING
Commercial Sawmilling and Veneer and Plywood Manufacturing
Sawmilling and timber processing for construction and manufacturing markets.Veneer and plywood production for commercial wood product manufacturing. -
02 · AUTOMOTIVE MANUFACTURING
Automotive Electronics Production and Vehicle Component Manufacturing
Automotive electronics manufacturing for vehicle parts and assembly industries.Vehicle component production with traceability across automotive manufacturing processes. -
03 · TRANSPORT & LOGISTICS
Warehouse Operations, Goods Distribution and Industrial Logistics
Warehouse storage and order fulfillment for industrial distribution operations.Internal material flow and goods movement within distribution facilities.
Technical specifications for 6RY1803-0DB02
-
Product Model6RY1803-0DB02
-
Product ParametersL05 power interface module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassL05 power interface module
-
Drive FamilySINAMICS DCM
-
Primary FunctionMonitors converter power interface
-
Power ArchitectureL05 DC-drive interface option
-
Voltage Class400–690 V AC monitoring
-
Current RatingSignal-level measurement paths
-
Control Supply24 V DC control input
-
Power SectionDCM power interface section
-
Mechanical DesignCoated option-board assembly
-
Electrical InterfaceC98043-A7107-L4 plugs
-
Cooling IntegrationNatural cabinet airflow
-
Board Designation6RY1803-0DB02 option L05
-
Service RoleDCM interface spare
-
Product StatusPM300 active spare
-
Commissioning CheckVerify input sensing and relays
View all additional
Alternative Names
6RY1803 0DB02
SINAMICS DCM L05 power interface module
Siemens L05 power interface module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6RY1803-0DB02 to the installed SINAMICS DCM
Siemens 6RY1803-0DB02 is a L05 power interface module used in the SINAMICS DCM.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: 6RY1803-0DB02
- Product class: L05 power interface module
- Family: SINAMICS DCM
The Siemens 6RY1803-0DB02 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6RY1803-0DB02 identity before exchange
Replace 6RY1803-0DB02 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact 6RY1803-0DB02 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens 6RY1803-0DB02 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6RY1803-0DB02
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6RY1803-0DB02 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size26 × 23 × 3.5 cm
-
Shipping weight0.7 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginAustria
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6RY1803-0DB02
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What function makes the L05 DCM power interface model-specific?
The L05 DCM power interface is used in the documented SINAMICS DCM configuration for monitors converter power interface. -
Why is 400–690 V AC sensing checked before exchange for the L05 DCM power interface?
For the L05 DCM power interface, match 400–690 V AC monitoring and Signal-level measurement paths to the installed equipment nameplate. -
Which power architecture is involved for the L05 DCM power interface?
The L05 DCM power interface performs monitors converter power interface through the l05 dc-drive interface option. -
What must match the Option L05 board designation for the L05 DCM power interface?
For the L05 DCM power interface, record 6RY1803-0DB02 option L05 together with the complete article and installed revision. -
How is damage at c98043-a7107-l4 plugs detected for the L05 DCM power interface?
On the L05 DCM power interface, inspect c98043-a7107-l4 plugs for keying, damage, contamination, routing and secure seating. -
Which 24 v dc control input condition is measured first for the L05 DCM power interface?
Before energizing the L05 DCM power interface, measure 24 v dc control input and confirm the documented polarity or phase condition. -
What prevents an incorrect replacement for the L05 DCM power interface?
A L05 DCM power interface replacement must match its electrical class, section role, companion hardware and mechanical interface. -
How is normal operation confirmed for the L05 DCM power interface?
For the L05 DCM power interface, verify input sensing and relays; then record diagnostics and the controlled functional-test result.
READY TO VERIFY YOUR PART?
Get a 6RY1803-0DB02 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6RY1803-0DB02L05 power interface moduleManufacturer: SiemensView Details
-
A5E00100936current transformer serviceManufacturer: SiemensView Details
-
A5E00430139PSB10 signal interface boardManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
