PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SE7038-6GL84-1HJ1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7038-6GL84-1HJ1 Mains thyristor control module
Siemens 6SE7038-6GL84-1HJ1 is a Mains thyristor control module used in the SIMOVERT MASTERDRIVES. It controls line-side thyristor firing and dc-link charging and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, Drive mains class, High-current converter rating, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, Drive mains class, High-current converter rating, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete Mains thyristor control module
ACTUAL APPLICATIONS
Application context for 6SE7038-6GL84-1HJ1
Manufacturer documentation places the Mains Thyristor Control Module in practical drive applications. The three cases below describe different operating tasks in which 6SE7038-6GL84-1HJ1 performs its documented product-family role with the configured companion equipment.
-
01 · OIL & GAS
Support compressor auxiliary drives with Mains Thyristor
In the automation chain for the lube-oil pumps, seal systems and ventilation motors, 6SE7038-6GL84-1HJ1 serves its documented function as a Mains Thyristor Control Module. During compressor start, the system uses this function to sequence auxiliary motor operation around train readiness, helping it establish the support systems before process loading. -
02 · WATER & WASTEWATER
Control sludge-pump control during solids-loading change
For the coordinated operation of the positive-displacement pumps and flow feedback, 6SE7038-6GL84-1HJ1 provides its specified system function as a Mains Thyristor Control Module. During solids-loading change, the system uses this function to hold the commanded feed rate as process load changes, helping it keep sludge transfer stable. -
03 · AUTOMOTIVE
Monitor body transfer with Mains Thyristor process control
In the automation chain for the skid conveyors and lift stations, 6SE7038-6GL84-1HJ1 supports the configured automation role as a Mains Thyristor Control Module. During model change, the system uses this function to coordinate motion requests and station interlocks, helping it keep the assembly takt moving.
Technical specifications for 6SE7038-6GL84-1HJ1
-
Product Model6SE7038-6GL84-1HJ1
-
Product ParametersMains thyristor control module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassMains thyristor control module
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionControls line-side thyristor firing and DC-link charging
-
Power ArchitectureLine-side firing electronics
-
Voltage ClassDrive mains class
-
Current RatingHigh-current converter rating
-
Power SectionMains input section
-
Mechanical DesignPlug-in control module
-
Electrical InterfaceThyristor gates, mains and feedback plugs
-
Commissioning CheckVerify phase sequence and charging response
View all additional
Alternative Names
6SE7038 6GL84 1HJ1
SIMOVERT MASTERDRIVES Mains thyristor control module
Siemens GL84 mains module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SE7038-6GL84-1HJ1 to the installed SIMOVERT MASTERDRIVES
Siemens 6SE7038-6GL84-1HJ1 is a Mains thyristor control module used in the SIMOVERT MASTERDRIVES to control line-side thyristor firing and DC-link charging. Its line-side firing electronics role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm Drive mains class, High-current converter rating, the mains input section, plug-in control module and thyristor gates, mains and feedback plugs. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete verify phase sequence and charging response, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6SE7038-6GL84-1HJ1
- Function: Controls line-side thyristor firing and DC-link charging
- Family: SIMOVERT MASTERDRIVES
The Siemens 6SE7038-6GL84-1HJ1 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SE7038-6GL84-1HJ1 identity before exchange
Treat 6SE7038-6GL84-1HJ1 as a configuration-specific Mains thyristor control module for the SIMOVERT MASTERDRIVES. Match the complete Siemens article number, installed mains input section, board or module revision, mechanical design and approved replacement record before removal.
Photograph thyristor gates, mains and feedback plugs, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented plug-in control module and any cooling or discharge provisions while the drive is isolated.
After installation, verify phase sequence and charging response. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: 6SE7038-6GL84-1HJ1
- Installed section: Mains input section
- Release check: Verify phase sequence and charging response
The Siemens 6SE7038-6GL84-1HJ1 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for 6SE7038-6GL84-1HJ1
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SE7038-6GL84-1HJ1 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size36 × 25 × 5 cm
-
Shipping weight0.8 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7038-6GL84-1HJ1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What system role is assigned to 6SE7038-6GL84-1HJ1 for mains thyristor firing in SIMOVERT MASTERDRIVES?
Use 6SE7038-6GL84-1HJ1 only for controls line-side thyristor firing and dc-link charging in the documented SIMOVERT MASTERDRIVES. Engineering must confirm the installed mains input section, Drive mains class and controlled drawing before work. -
Which measurements help diagnose phase-sequence control faults around the GL84 mains module?
For 6SE7038-6GL84-1HJ1, review drive alarms, DC-link or supply readings, command status, thyristor gates, mains and feedback plugs and the physical condition of the GL84 mains module. Compare results with a known-good channel where the site procedure permits. -
Which wiring and hardware records are needed before a 6SE7038-6GL84-1HJ1 replacement?
Before removing 6SE7038-6GL84-1HJ1, save parameters where applicable and photograph the plug-in control module, connector keys, cable labels, shield and protective-earth routes, adjacent assemblies and full nameplate. -
How should the DC-link charging test be commissioned after fitting 6SE7038-6GL84-1HJ1?
After installation, verify phase sequence and charging response. Maintenance should then review diagnostics, prove the DC-link charging test under controlled conditions and record the final result before production release. -
How should an RFQ describe 6SE7038-6GL84-1HJ1 as the correct GL84 mains module?
Match the complete 6SE7038-6GL84-1HJ1 article, GL84 mains module, Drive mains class, High-current converter rating, hardware suffix and installed SIMOVERT MASTERDRIVES configuration. A similar appearance or shortened article number is insufficient. -
Which revision, condition and accessory details should a seller state for 6SE7038-6GL84-1HJ1?
The offer for 6SE7038-6GL84-1HJ1 should state label revision, new or surplus condition, visible inspection result and whether connectors, memory, software, manuals or other accessories are included. Unlisted accessories are excluded. -
Which delivery details should appear on a quotation for 6SE7038-6GL84-1HJ1?
For 6SE7038-6GL84-1HJ1, request confirmed stock status, dispatch time, ship-from location, packed size, shipping weight and courier options. The written quotation controls the final delivery terms. -
Which warranty, document and customs records should accompany a 6SE7038-6GL84-1HJ1 offer?
A 6SE7038-6GL84-1HJ1 quotation should identify the supplied Data Sheet and Installation Instructions, 12-month AMIKON warranty, HS reference, origin, return conditions and any document or licence limitations.
READY TO VERIFY YOUR PART?
Get a 6SE7038-6GL84-1HJ1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
