PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SE7031-7HG84-1JC1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7031-7HG84-1JC1 IGD5 inverter trigger module
Siemens 6SE7031-7HG84-1JC1 is a IGD5 inverter trigger module in the SIMOVERT MASTERDRIVES. It is used to control the connected motor or drive function within the configured machine.
Its documented configuration includes component class of IGD5 inverter trigger module, drive family of SIMOVERT MASTERDRIVES, primary function of Triggers high-voltage inverter devices, and power architecture of IGD5 gate-control architecture. During operation, the IGD5 inverter trigger module processes the configured drive commands and regulates the connected motor or power section.
Its documented configuration includes component class of IGD5 inverter trigger module, drive family of SIMOVERT MASTERDRIVES, primary function of Triggers high-voltage inverter devices, and power architecture of IGD5 gate-control architecture. During operation, the IGD5 inverter trigger module processes the configured drive commands and regulates the connected motor or power section.
BEFORE YOU BUY
Confirm the complete IGD5 inverter trigger module
ACTUAL APPLICATIONS
Application context for 6SE7031-7HG84-1JC1
Manufacturer documentation places the Igd5 Inverter Trig r Module in practical drive applications. The three cases below describe different operating tasks in which 6SE7031-7HG84-1JC1 performs its documented product-family role with the configured companion equipment.
-
01 · WATER & WASTEWATER
Align intake-pump staging during wet-well rise
At the control layer of the intake pumps, wet-well levels and common headers, 6SE7031-7HG84-1JC1 performs its assigned control role as a Igd5 Inverter Trig r Module. During wet-well rise, the system uses this function to bring the next pump into the required speed range, helping it control level without a sudden hydraulic step. -
02 · MINING & METALS
Balance bulk conveying with Igd5 Inverter process control
Inside the feeders, belts and transfer chutes, 6SE7031-7HG84-1JC1 supports the configured automation role as a Igd5 Inverter Trig r Module. During material surge, the system uses this function to adapt equipment demand to material flow, helping it reduce spillage and belt overload. -
03 · PULP & PAPER
Monitor paper-machine draws with Igd5 Inverter
Within the press rolls and sectional drives, 6SE7031-7HG84-1JC1 serves its documented function as a Igd5 Inverter Trig r Module. During sheet threading, the system uses this function to maintain speed ratios between machine sections, helping it protect sheet tension during acceleration.
Technical specifications for 6SE7031-7HG84-1JC1
-
Product Model6SE7031-7HG84-1JC1
-
Product ParametersIGD5 inverter trigger module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassIGD5 inverter trigger module
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionTriggers high-voltage inverter devices
-
Power ArchitectureIGD5 gate-control architecture
-
Voltage Class660–690 V AC / 890–930 V DC
-
Current Rating171 A device class
-
Control SupplyInternal drive auxiliary supply
-
Power SectionInverter firing section
-
Mechanical DesignPlug-in industrial module
-
Electrical InterfaceGate and feedback connectors
-
Cooling IntegrationConverter cabinet cooling
-
Board Designation6SE7031-7HG84-1JC1 IGD5
-
Service RoleHigh-voltage inverter spare
-
Product StatusLegacy Siemens component
-
Commissioning CheckCheck gate channels at controlled load
View all additional
Alternative Names
6SE7031 7HG84 1JC1
SIMOVERT MASTERDRIVES IGD5 inverter trigger module
Siemens IGD5 inverter trigger module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SE7031-7HG84-1JC1 to the installed SIMOVERT MASTERDRIVES
Siemens 6SE7031-7HG84-1JC1 is a IGD5 inverter trigger module used in the SIMOVERT MASTERDRIVES.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: 6SE7031-7HG84-1JC1
- Product class: IGD5 inverter trigger module
- Family: SIMOVERT MASTERDRIVES
The Siemens 6SE7031-7HG84-1JC1 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SE7031-7HG84-1JC1 identity before exchange
Replace 6SE7031-7HG84-1JC1 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact 6SE7031-7HG84-1JC1 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens 6SE7031-7HG84-1JC1 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SE7031-7HG84-1JC1
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SE7031-7HG84-1JC1 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size30.5 × 2.5 × 58.4 cm
-
Shipping weight1.22 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7031-7HG84-1JC1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is distinctive about the 171 A IGD5 trigger module?
The 171 A IGD5 trigger module is used in the documented SIMOVERT MASTERDRIVES configuration for triggers high-voltage inverter devices. -
Which installation matches 660–690 V AC · 171 A for the 171 A IGD5 trigger module?
For the 171 A IGD5 trigger module, match 660–690 V AC / 890–930 V DC and 171 A device class to the installed equipment nameplate. -
How does the module triggers high-voltage inverter devices for the 171 A IGD5 trigger module?
The 171 A IGD5 trigger module performs triggers high-voltage inverter devices through the igd5 gate-control architecture. -
What record is needed for IGD5 JC1 revision for the 171 A IGD5 trigger module?
For the 171 A IGD5 trigger module, record 6SE7031-7HG84-1JC1 IGD5 together with the complete article and installed revision. -
Which connection risk affects gate and feedback connectors for the 171 A IGD5 trigger module?
On the 171 A IGD5 trigger module, inspect gate and feedback connectors for keying, damage, contamination, routing and secure seating. -
How is internal drive auxiliary supply checked under load for the 171 A IGD5 trigger module?
Before energizing the 171 A IGD5 trigger module, measure internal drive auxiliary supply and confirm the documented polarity or phase condition. -
What companion hardware must agree for the 171 A IGD5 trigger module?
A 171 A IGD5 trigger module replacement must match its electrical class, section role, companion hardware and mechanical interface. -
How is the repaired section validated for the 171 A IGD5 trigger module?
For the 171 A IGD5 trigger module, check gate channels at controlled load; then record diagnostics and the controlled functional-test result.
READY TO VERIFY YOUR PART?
Get a 6SE7031-7HG84-1JC1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
