PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SE7031-7HG84-6JA1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7031-7HG84-6JA1 PSU1 power supply module
Siemens 6SE7031-7HG84-6JA1 is a PSU1 power supply module for the SIMOVERT MASTERDRIVES. It is used to generates control power for designs e through h. Confirm the exact article, electrical class, interfaces, companion hardware and cooling arrangement before ordering.
BEFORE YOU BUY
Confirm the complete PSU1 power supply module
ACTUAL APPLICATIONS
Application context for 6SE7031-7HG84-6JA1
Manufacturer documentation places the Psu1 Power Supply Module in practical power applications. The three cases below describe different operating tasks in which 6SE7031-7HG84-6JA1 performs its documented product-family role with the configured companion equipment.
-
01 · MACHINERY MANUFACTURING
Balance robotic handling during fault recovery
Within the robots, grippers and transfer fixtures, 6SE7031-7HG84-6JA1 serves its documented function as a Psu1 Power Supply Module. During fault recovery, the system uses this function to restore the cell from a defined intermediate state, helping it resume material flow without losing part identity. -
02 · FOOD & BEVERAGE
Sequence recipe mixing with Psu1 Power process control
At the control layer of the mixers and ingredient skids, 6SE7031-7HG84-6JA1 serves its documented function as a Psu1 Power Supply Module. During recipe changeover, the system uses this function to sequence material transfers and equipment permissives, helping it preserve the verified batch state. -
03 · POWER GENERATION
Protect cooling-water circulation with Psu1 Power
Within the circulating pumps and heat exchangers, 6SE7031-7HG84-6JA1 supports the configured automation role as a Psu1 Power Supply Module. During controlled shutdown, the system uses this function to sequence redundant equipment around the operating unit, helping it keep heat rejection available to the process.
Technical specifications for 6SE7031-7HG84-6JA1
-
Product Model6SE7031-7HG84-6JA1
-
Product ParametersPSU1 power supply module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassPSU1 power supply module
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionGenerates control power for designs E through H
-
Power ArchitecturePSU1 multi-input supply
-
Voltage Class380–460 / 660–690 V AC
-
Current RatingDesign E–H load class
-
Control Supply510–620 / 890–930 V DC
-
Power SectionConverter power-supply section
-
Mechanical DesignPlug-in PSU1 module
-
Electrical InterfaceMains, DC and output connectors
-
Cooling IntegrationForced cabinet airflow
-
Board Designation6SE7031-7HG84-6JA1 PSU1
-
Service RoleDesign E–H supply spare
-
Product StatusLegacy Siemens component
-
Commissioning CheckVerify input range and DC outputs
View all additional
Alternative Names
6SE7031 7HG84 6JA1
SIMOVERT MASTERDRIVES PSU1 power supply module
Siemens PSU1 power supply module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SE7031-7HG84-6JA1 to the installed SIMOVERT MASTERDRIVES
Siemens 6SE7031-7HG84-6JA1 is a PSU1 power supply module used in the SIMOVERT MASTERDRIVES to generate control power for designs E through H. Its psu1 multi-input supply architecture must match the documented drive configuration, controlled hardware arrangement and assigned converter power-supply section.
Before integration, confirm the 380–460 / 660–690 v ac, design e–h load class and 510–620 / 890–930 v dc. Compare the complete article, plug-in psu1 module and mains, dc and output connectors with the installed equipment, cable schedule and the technical data recorded in the product PDF.
Maintain the documented forced cabinet airflow, isolate all hazardous energy and apply ESD protection before handling the component. Complete the specified action to verify input range and dc outputs, then review Siemens diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6SE7031-7HG84-6JA1
- Operating role: Generates control power for designs E through H
- Connection class: Mains, DC and output connectors
The Siemens 6SE7031-7HG84-6JA1 requires documented system integration for its converter power-supply section, with the final verify input range and dc outputs result recorded before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SE7031-7HG84-6JA1 configuration before exchange
Treat 6SE7031-7HG84-6JA1 as a configuration-specific PSU1 power supply module for the SIMOVERT MASTERDRIVES. Match the complete Siemens article identity, 6SE7031-7HG84-6JA1 PSU1, installed hardware revision, design e–h supply spare and documented converter power-supply section before removing the original component.
Photograph the plug-in psu1 module, mains, dc and output connectors, cable labels, shielding, protective-earth points and adjacent assemblies. Record the 380–460 / 660–690 v ac, design e–h load class and 510–620 / 890–930 v dc so the replacement can be checked against the controlled drive documentation.
After installation, verify input range and dc outputs. Restore only the approved project data and interface assignments, review power-stage or controller diagnostics, test the control or power path associated with generates control power for designs e through h at a controlled operating point and retain the measured results in the maintenance record.
Features:
- Article and board: 6SE7031-7HG84-6JA1 PSU1
- Interface record: Mains, DC and output connectors
- Release test: Verify input range and DC outputs
The Siemens 6SE7031-7HG84-6JA1 requires documented replacement verification for its converter power-supply section, with the final verify input range and dc outputs result recorded before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SE7031-7HG84-6JA1
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SE7031-7HG84-6JA1 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm before dispatch
-
Shipping weightConfirm before dispatch
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85044090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7031-7HG84-6JA1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What function makes the Design E–H PSU1 module model-specific?
The Design E–H PSU1 module is used in the documented SIMOVERT MASTERDRIVES configuration for generates control power for designs e through h. -
Why is 380–690 V AC class checked before exchange for the Design E–H PSU1 module?
For the Design E–H PSU1 module, match 380–460 / 660–690 V AC and Design E–H load class to the installed equipment nameplate. -
Which power architecture is involved for the Design E–H PSU1 module?
The Design E–H PSU1 module performs generates control power for designs e through h through the psu1 multi-input supply. -
What must match the PSU1 6JA1 module designation for the Design E–H PSU1 module?
For the Design E–H PSU1 module, record 6SE7031-7HG84-6JA1 PSU1 together with the complete article and installed revision. -
How is damage at mains, dc and output connectors detected for the Design E–H PSU1 module?
On the Design E–H PSU1 module, inspect mains, dc and output connectors for keying, damage, contamination, routing and secure seating. -
Which 510–620 / 890–930 v dc condition is measured first for the Design E–H PSU1 module?
Before energizing the Design E–H PSU1 module, measure 510–620 / 890–930 v dc and confirm the documented polarity or phase condition. -
What prevents an incorrect replacement for the Design E–H PSU1 module?
A Design E–H PSU1 module replacement must match its electrical class, section role, companion hardware and mechanical interface. -
How is normal operation confirmed for the Design E–H PSU1 module?
For the Design E–H PSU1 module, verify input range and dc outputs; then record diagnostics and the controlled functional-test result.
READY TO VERIFY YOUR PART?
Get a 6SE7031-7HG84-6JA1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
