PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- C98043-A1682-L1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
C98043-A1682-L1 SIMOVERT control circuit board
Siemens C98043-A1682-L1 is a SIMOVERT control circuit board in the Siemens SIMOVERT. It is used to provide the documented control, processing or interface function within the associated equipment.
Its documented configuration includes component class of Control circuit board, drive family of SIMOVERT MASTERDRIVES, primary function of Controls the converter power stage, and power architecture of DC converter control electronics. During operation, the SIMOVERT control circuit board performs its assigned SIMOVERT control circuit board function through the documented power, signal and communication interfaces.
Its documented configuration includes component class of Control circuit board, drive family of SIMOVERT MASTERDRIVES, primary function of Controls the converter power stage, and power architecture of DC converter control electronics. During operation, the SIMOVERT control circuit board performs its assigned SIMOVERT control circuit board function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete SIMOVERT control circuit board
ACTUAL APPLICATIONS
Application context for C98043-A1682-L1
Manufacturer documentation places the Simovert Control Circuit Board in practical drive applications. The three cases below describe different operating tasks in which C98043-A1682-L1 performs its documented product-family role with the configured companion equipment.
-
01 · OIL & GAS
Observe compressor auxiliary drives during compressor start
At the control layer of the lube-oil pumps, seal systems and ventilation motors, C98043-A1682-L1 serves its documented function as a Simovert Control Circuit Board. During compressor start, the system uses this function to sequence auxiliary motor operation around train readiness, helping it establish the support systems before process loading. -
02 · WATER & WASTEWATER
Protect high-lift pump speed with Simovert Control
Inside the pump motors, discharge headers and pressure loops, C98043-A1682-L1 performs its assigned control role as a Simovert Control Circuit Board. During demand increase, the system uses this function to adjust motor speed from the process demand signal, helping it maintain the required pressure with less throttling. -
03 · PLASTICS & PACKAGING
Balance carton forming during registration correction
In the automation chain for the blank feeders and folding stations, C98043-A1682-L1 operates in its approved product-family role as a Simovert Control Circuit Board. During registration correction, the system uses this function to apply the selected format to the machine sequence, helping it produce the intended package geometry.
Technical specifications for C98043-A1682-L1
-
Product ModelC98043-A1682-L1
-
Product ParametersSIMOVERT control circuit board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassControl circuit board
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionControls the converter power stage
-
Power ArchitectureDC converter control electronics
-
Voltage ClassInstalled-drive voltage class
-
Current Rating100–200 mA control load
-
Control Supply24 V DC auxiliary input
-
Power SectionConverter control section
-
Mechanical DesignFlat printed-circuit assembly
-
Electrical InterfaceGalvanically isolated signal plugs
-
Cooling IntegrationCabinet ambient cooling
-
Board DesignationC98043-A1682-L1 assembly
-
Service Role6SE7036 control-board partner
-
Product StatusLegacy Siemens spare
-
Commissioning CheckVerify connector keying and signals
View all additional
Alternative Names
C98043 A1682 L1
SIMOVERT MASTERDRIVES repair parts SIMOVERT control circuit board
Siemens SIMOVERT control circuit board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match C98043-A1682-L1 to the installed SIMOVERT MASTERDRIVES repair parts
Siemens C98043-A1682-L1 is a SIMOVERT control circuit board used in the SIMOVERT MASTERDRIVES repair parts.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: C98043-A1682-L1
- Product class: SIMOVERT control circuit board
- Family: SIMOVERT MASTERDRIVES repair parts
The Siemens C98043-A1682-L1 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete C98043-A1682-L1 identity before exchange
Replace C98043-A1682-L1 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact C98043-A1682-L1 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens C98043-A1682-L1 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for C98043-A1682-L1
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens C98043-A1682-L1 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size26.3 × 12.5 × 2.5 cm
-
Shipping weight0.2 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about C98043-A1682-L1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What role does C98043-A1682-L1 have in the converter?
It is the control circuit board that routes isolated commands and feedback within the SIMOVERT converter electronics. -
Why is 6SE7036-1EE85-1HA0 associated with this board?
That number identifies the related converter control module; confirm both markings on the installed assembly before ordering. -
How is galvanic isolation checked on the A1682 board?
Inspect the isolated signal paths and verify them using the applicable Siemens service procedure before power is restored. -
What auxiliary source supplies the control electronics?
The documented control input is 24 V DC, with the installed connector and polarity confirmed at the cabinet. -
Which relay or power wiring belongs on C98043-A1682-L1?
Use the terminal record from the removed unit; signal and control wiring must return to the same labelled positions. -
Does board size prove interchangeability?
No. The 26.3 × 12.5 × 2.5 cm format is only a physical reference and does not replace an article and revision check. -
What photographs help identify an A1682 replacement?
Provide the front label, connector edge, component side, reverse side and the related 6SE7036 module marking. -
Which checks follow installation of this control board?
Confirm seating and isolation, apply auxiliary power, review converter status signals and then test the controlled drive function.
READY TO VERIFY YOUR PART?
Get a C98043-A1682-L1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
