PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SE7032-7EB87-2DA1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7032-7EB87-2DA1 High-power braking unit
Siemens 6SE7032-7EB87-2DA1 is a High-power braking unit in the SINAMICS / SIMOVERT MASTERDRIVES. It is used to perform the assigned signal, control or interface function in the installed equipment.
Its documented configuration includes component class of High-power braking unit, drive family of SINAMICS / SIMOVERT MASTERDRIVES, primary function of Dissipates regenerated drive energy, and power architecture of DC-link braking chopper. During operation, the High-power braking unit performs its assigned High-power braking unit function through the documented power, signal and communication interfaces.
Its documented configuration includes component class of High-power braking unit, drive family of SINAMICS / SIMOVERT MASTERDRIVES, primary function of Dissipates regenerated drive energy, and power architecture of DC-link braking chopper. During operation, the High-power braking unit performs its assigned High-power braking unit function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete High-power braking unit
ACTUAL APPLICATIONS
Where 6SE7032-7EB87-2DA1 Fits Across Major Industry Sectors
Uses span textiles, plastics and metalworking, subject to verified compatibility, operating conditions and project requirements.
-
01 · TEXTILE MANUFACTURING
Synthetic Fiber Manufacturing and Industrial Tire Cord Production
Manmade fiber production and processing within the textile industry.Tire cord manufacturing for industrial textile and reinforcement products. -
02 · PLASTICS & RUBBER
Plastic Products Manufacturing and Rubber Material Processing
Plastic material production through extrusion, calendering and film processing.Rubber material preparation and molding for manufactured rubber products. -
03 · METALS & WIRE
Industrial Metal Processing and Commercial Wire Manufacturing
Metal processing and rolling for industrial materials manufacturing operations.Wire and cable production within the metal processing industry.
Technical specifications for 6SE7032-7EB87-2DA1
-
Product Model6SE7032-7EB87-2DA1
-
Product ParametersHigh-power braking unit
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassHigh-power braking unit
-
Drive FamilySINAMICS / SIMOVERT MASTERDRIVES
-
Primary FunctionDissipates regenerated drive energy
-
Power ArchitectureDC-link braking chopper
-
Voltage Class510–650 V DC
-
Current Rating170 kW braking duty
-
Control SupplyInternal control electronics
-
Power SectionExternal braking branch
-
Mechanical DesignIP20 cabinet unit
-
Electrical InterfaceDC-link and resistor terminals
-
Cooling IntegrationCabinet air cooling
-
Board Designation6SE7032-7EB87-2DA1 unit
-
Service RoleHeavy-drive braking component
-
Product StatusPM300 active product
-
Commissioning CheckTest DC threshold and resistor path
View all additional
Alternative Names
6SE7032 7EB87 2DA1
SINAMICS / SIMOVERT MASTERDRIVES High-power braking unit
Siemens High-power braking unit
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SE7032-7EB87-2DA1 to the installed SINAMICS / SIMOVERT MASTERDRIVES
Siemens 6SE7032-7EB87-2DA1 is a High-power braking unit used in the SINAMICS / SIMOVERT MASTERDRIVES.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: 6SE7032-7EB87-2DA1
- Product class: High-power braking unit
- Family: SINAMICS / SIMOVERT MASTERDRIVES
The Siemens 6SE7032-7EB87-2DA1 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SE7032-7EB87-2DA1 identity before exchange
Replace 6SE7032-7EB87-2DA1 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact 6SE7032-7EB87-2DA1 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens 6SE7032-7EB87-2DA1 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SE7032-7EB87-2DA1
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SE7032-7EB87-2DA1 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm before dispatch
-
Shipping weight14.5 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7032-7EB87-2DA1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Where is the 170 kW IP20 braking unit used?
The 170 kW IP20 braking unit is used in the documented SINAMICS / SIMOVERT MASTERDRIVES configuration for dissipates regenerated drive energy. -
Why does 510–650 V DC · 170 kW matter for the 170 kW IP20 braking unit?
For the 170 kW IP20 braking unit, match 510–650 V DC and 170 kW braking duty to the installed equipment nameplate. -
Which job is performed by the 170 kW IP20 braking unit?
The 170 kW IP20 braking unit performs dissipates regenerated drive energy through the dc-link braking chopper. -
How is the IP20 braking assembly identified for the 170 kW IP20 braking unit?
For the 170 kW IP20 braking unit, record 6SE7032-7EB87-2DA1 unit together with the complete article and installed revision. -
What should be inspected at dc-link and resistor terminals for the 170 kW IP20 braking unit?
On the 170 kW IP20 braking unit, inspect dc-link and resistor terminals for keying, damage, contamination, routing and secure seating. -
Which supply check protects the 170 kW IP20 braking unit?
Before energizing the 170 kW IP20 braking unit, measure internal control electronics and confirm the documented polarity or phase condition. -
Can a similar board replace the 170 kW IP20 braking unit?
A 170 kW IP20 braking unit replacement must match its electrical class, section role, companion hardware and mechanical interface. -
What test releases the 170 kW IP20 braking unit to service?
For the 170 kW IP20 braking unit, test dc threshold and resistor path; then record diagnostics and the controlled functional-test result.
READY TO VERIFY YOUR PART?
Get a 6SE7032-7EB87-2DA1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6SE7032-7EB87-2DA1High-power braking unitManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
