PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SE7038-6GL84-1BG0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7038-6GL84-1BG0 IVI inverter interface module
Siemens 6SE7038-6GL84-1BG0 is a IVI inverter interface module in the SIMOVERT MASTERDRIVES. It is used to control the connected motor or drive function within the configured machine.
Its documented configuration includes component class of IVI inverter interface module, drive family of SIMOVERT MASTERDRIVES, primary function of Transfers inverter commands and feedback, and power architecture of Digital converter electronics. During operation, the IVI inverter interface module processes the configured drive commands and regulates the connected motor or power section.
Its documented configuration includes component class of IVI inverter interface module, drive family of SIMOVERT MASTERDRIVES, primary function of Transfers inverter commands and feedback, and power architecture of Digital converter electronics. During operation, the IVI inverter interface module processes the configured drive commands and regulates the connected motor or power section.
BEFORE YOU BUY
Confirm the complete IVI inverter interface module
ACTUAL APPLICATIONS
Application context for 6SE7038-6GL84-1BG0
Manufacturer documentation places the Ivi Inverter Interface Module in practical drive applications. The three cases below describe different operating tasks in which 6SE7038-6GL84-1BG0 performs its documented product-family role with the configured companion equipment.
-
01 · PLASTICS & PACKAGING
Verify palletizing with Ivi Inverter process control
At the control layer of the case conveyors and robot cells, 6SE7038-6GL84-1BG0 supports the configured automation role as a Ivi Inverter Interface Module. During product-gap recovery, the system uses this function to restore coordinated flow after a controlled stop, helping it return the line to stable throughput. -
02 · OIL & GAS
Observe cooling-fan control during ambient-load change
At the control layer of the air coolers, fan motors and temperature feedback, 6SE7038-6GL84-1BG0 handles its designated signal or control duty as a Ivi Inverter Interface Module. During ambient-load change, the system uses this function to trim fan speed to the measured cooling requirement, helping it hold outlet temperature without unnecessary fan power. -
03 · WATER & WASTEWATER
Track aeration-blower output with Ivi Inverter
During operation of the blower motors, air headers and oxygen-control loops, 6SE7038-6GL84-1BG0 provides its specified system function as a Ivi Inverter Interface Module. During oxygen-setpoint change, the system uses this function to coordinate blower speed with the required air delivery, helping it match aeration energy to treatment demand.
Technical specifications for 6SE7038-6GL84-1BG0
-
Product Model6SE7038-6GL84-1BG0
-
Product ParametersIVI inverter interface module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassIVI inverter interface module
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionTransfers inverter commands and feedback
-
Power ArchitectureDigital converter electronics
-
Voltage ClassMASTERDRIVES power class
-
Current RatingIVI signal-channel rating
-
Control Supply24 V DC control class
-
Power SectionInverter interface section
-
Mechanical DesignPlug-in service assembly
-
Electrical InterfaceIVI control and feedback plugs
-
Cooling IntegrationCabinet cooling arrangement
-
Board Designation6SE7038-6GL84-1BG0 assembly
-
Service RoleSiemens service component
-
Product StatusVerify installed revision
-
Commissioning CheckRun diagnostics and functional test
View all additional
Alternative Names
6SE7038 6GL84 1BG0
SIMOVERT MASTERDRIVES IVI inverter interface module
Siemens IVI inverter interface module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SE7038-6GL84-1BG0 to the installed SIMOVERT MASTERDRIVES
Siemens 6SE7038-6GL84-1BG0 is an IVI inverter interface module used in the SIMOVERT MASTERDRIVES to transfer inverter commands and feedback. Its digital converter electronics architecture must match the documented drive configuration, controlled hardware arrangement and assigned inverter interface section.
Before integration, confirm the masterdrives power class, ivi signal-channel rating and 24 v dc control class. Compare the complete article, plug-in service assembly and ivi control and feedback plugs with the installed equipment, cable schedule and the technical data recorded in the product PDF.
Maintain the documented cabinet cooling arrangement, isolate all hazardous energy and apply ESD protection before handling the component. Complete the specified action to run diagnostics and functional test, then review Siemens diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6SE7038-6GL84-1BG0
- Operating role: Transfers inverter commands and feedback
- Connection class: IVI control and feedback plugs
The Siemens 6SE7038-6GL84-1BG0 requires documented system integration for its inverter interface section, with the final run diagnostics and functional test result recorded before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SE7038-6GL84-1BG0 configuration before exchange
Treat 6SE7038-6GL84-1BG0 as a configuration-specific IVI inverter interface module for the SIMOVERT MASTERDRIVES. Match the complete Siemens article identity, 6SE7038-6GL84-1BG0 assembly, installed hardware revision, siemens service component and documented inverter interface section before removing the original component.
Photograph the plug-in service assembly, ivi control and feedback plugs, cable labels, shielding, protective-earth points and adjacent assemblies. Record the masterdrives power class, ivi signal-channel rating and 24 v dc control class so the replacement can be checked against the controlled drive documentation.
After installation, run diagnostics and functional test. Restore only the approved project data and interface assignments, review power-stage or controller diagnostics, test the control or power path associated with transfers inverter commands and feedback at a controlled operating point and retain the measured results in the maintenance record.
Features:
- Article and board: 6SE7038-6GL84-1BG0 assembly
- Interface record: IVI control and feedback plugs
- Release test: Run diagnostics and functional test
The Siemens 6SE7038-6GL84-1BG0 requires documented replacement verification for its inverter interface section, with the final run diagnostics and functional test result recorded before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for 6SE7038-6GL84-1BG0
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SE7038-6GL84-1BG0 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size34.5 × 10 × 3 cm
-
Shipping weight0.2 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7038-6GL84-1BG0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Where is the IVI BG0 interface module used?
The IVI BG0 interface module is used in the documented SIMOVERT MASTERDRIVES configuration for transfers inverter commands and feedback. -
Why does MASTERDRIVES power class matter for the IVI BG0 interface module?
For the IVI BG0 interface module, match MASTERDRIVES power class and IVI signal-channel rating to the installed equipment nameplate. -
Which job is performed by the IVI BG0 interface module?
The IVI BG0 interface module performs transfers inverter commands and feedback through the digital converter electronics. -
How is the IVI BG0 board identified for the IVI BG0 interface module?
For the IVI BG0 interface module, record 6SE7038-6GL84-1BG0 assembly together with the complete article and installed revision. -
What should be inspected at ivi control and feedback plugs for the IVI BG0 interface module?
On the IVI BG0 interface module, inspect ivi control and feedback plugs for keying, damage, contamination, routing and secure seating. -
Which supply check protects the IVI BG0 interface module?
Before energizing the IVI BG0 interface module, measure 24 v dc control class and confirm the documented polarity or phase condition. -
Can a similar board replace the IVI BG0 interface module?
A IVI BG0 interface module replacement must match its electrical class, section role, companion hardware and mechanical interface. -
What test releases the IVI BG0 interface module to service?
For the IVI BG0 interface module, run diagnostics and functional test; then record diagnostics and the controlled functional-test result.
READY TO VERIFY YOUR PART?
Get a 6SE7038-6GL84-1BG0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
-
-
-
-
200350-02-00-01GENERAL PURPOSE PIEZOELECTRIC ACCELEROMETERManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
