PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SE7038-6GL84-1JA1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7038-6GL84-1JA1 PSU2 power supply module
Siemens 6SE7038-6GL84-1JA1 is a PSU2 power supply module used in the SIMOVERT MASTERDRIVES. It provides regulated auxiliary power for converter electronics and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, Device designs J through M, Converter-defined auxiliary load, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, Device designs J through M, Converter-defined auxiliary load, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete PSU2 power supply module
ACTUAL APPLICATIONS
Application context for 6SE7038-6GL84-1JA1
Manufacturer documentation places the Psu2 Power Supply Module in practical power applications. The three cases below describe different operating tasks in which 6SE7038-6GL84-1JA1 performs its documented product-family role with the configured companion equipment.
-
01 · WATER & WASTEWATER
Integrate aeration control with Psu2 Power process control
As part of the blowers and dissolved-oxygen loops, 6SE7038-6GL84-1JA1 supports the configured automation role as a Psu2 Power Supply Module. During changing oxygen demand, the system uses this function to adjust air delivery from process feedback, helping it stabilize treatment performance. -
02 · FOOD & BEVERAGE
Stabilize recipe mixing during recipe changeover
During operation of the mixers and ingredient skids, 6SE7038-6GL84-1JA1 serves its documented function as a Psu2 Power Supply Module. During recipe changeover, the system uses this function to sequence material transfers and equipment permissives, helping it preserve the verified batch state. -
03 · MACHINERY MANUFACTURING
Regulate press sequencing during part change process control
In the automation chain for the feed systems, dies and safety interfaces, 6SE7038-6GL84-1JA1 supports the configured automation role as a Psu2 Power Supply Module. During part change, the system uses this function to apply the selected product recipe to the sequence, helping it produce the intended part without skipping an interlock.
Technical specifications for 6SE7038-6GL84-1JA1
-
Product Model6SE7038-6GL84-1JA1
-
Product ParametersPSU2 power supply module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassPSU2 power supply module
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionProvides regulated auxiliary power for converter electronics
-
Power ArchitecturePSU2 internal supply
-
Voltage ClassDevice designs J through M
-
Current RatingConverter-defined auxiliary load
-
Power SectionAuxiliary power section
-
Mechanical DesignPlug-in PSU2 assembly
-
Electrical InterfaceInternal supply and feedback connectors
-
Commissioning CheckMeasure output rails before controlled start
View all additional
Alternative Names
6SE7038 6GL84 1JA1
SIMOVERT MASTERDRIVES PSU2 power supply module
Siemens J–M chassis PSU2
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SE7038-6GL84-1JA1 to the installed SIMOVERT MASTERDRIVES
Siemens 6SE7038-6GL84-1JA1 is a PSU2 power supply module used in the SIMOVERT MASTERDRIVES to provide regulated auxiliary power for converter electronics. Its psu2 internal supply role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm Device designs J through M, Converter-defined auxiliary load, the auxiliary power section, plug-in psu2 assembly and internal supply and feedback connectors. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete measure output rails before controlled start, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6SE7038-6GL84-1JA1
- Function: Provides regulated auxiliary power for converter electronics
- Family: SIMOVERT MASTERDRIVES
The Siemens 6SE7038-6GL84-1JA1 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SE7038-6GL84-1JA1 identity before exchange
Treat 6SE7038-6GL84-1JA1 as a configuration-specific PSU2 power supply module for the SIMOVERT MASTERDRIVES. Match the complete Siemens article number, installed auxiliary power section, board or module revision, mechanical design and approved replacement record before removal.
Photograph internal supply and feedback connectors, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented plug-in psu2 assembly and any cooling or discharge provisions while the drive is isolated.
After installation, measure output rails before controlled start. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: 6SE7038-6GL84-1JA1
- Installed section: Auxiliary power section
- Release check: Measure output rails before controlled start
The Siemens 6SE7038-6GL84-1JA1 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for 6SE7038-6GL84-1JA1
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SE7038-6GL84-1JA1 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size27 × 29 × 8 cm
-
Shipping weight1.4 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7038-6GL84-1JA1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which documented task requires the J–M chassis PSU2?
6SE7038-6GL84-1JA1 is applied to provides regulated auxiliary power for converter electronics in the SIMOVERT MASTERDRIVES; verify the installed auxiliary power section first. -
How is the Device designs J through M class checked for the J–M chassis PSU2?
Compare the complete 6SE7038-6GL84-1JA1 identifier, drive nameplate, DC-link or supply data and the applicable Siemens manual. -
What distinguishes the auxiliary rail supply configuration?
Match Converter-defined auxiliary load, plug-in psu2 assembly and the controlled hardware arrangement rather than appearance alone. -
Which records preserve the J–M chassis fit setup?
Photograph internal supply and feedback connectors, connector keys, cable labels, grounding, adjacent parts and revision before removing 6SE7038-6GL84-1JA1. -
What isolation step protects the J–M chassis PSU2?
Apply site lockout, wait the Siemens discharge time, prove absence of voltage and use ESD controls before handling 6SE7038-6GL84-1JA1. -
What arrival inspection applies to auxiliary rail supply?
Check the 6SE7038-6GL84-1JA1 label, suffix, connectors, coating, mechanical damage, contamination and protective packing before installation. -
How is the output-voltage test result accepted?
Measure output rails before controlled start. Record diagnostics and the controlled functional result before release. -
What quotation details identify the J–M chassis PSU2?
Send the full 6SE7038-6GL84-1JA1 label, installed auxiliary power section, interface photos, quantity, fault symptoms and destination.
READY TO VERIFY YOUR PART?
Get a 6SE7038-6GL84-1JA1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
