PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SE7038-6GL84-1JB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7038-6GL84-1JB0 VDU voltage divider module
Siemens 6SE7038-6GL84-1JB0 is a VDU voltage divider module for the SIMOVERT MASTERDRIVES. It is used to scale high DC voltage for control measurement. Confirm the exact article, electrical class, interfaces, companion hardware and cooling arrangement before ordering.
BEFORE YOU BUY
Confirm the complete VDU voltage divider module
ACTUAL APPLICATIONS
Application context for 6SE7038-6GL84-1JB0
Manufacturer documentation places the Vdu Volta Divider Module in practical drive applications. The three cases below describe different operating tasks in which 6SE7038-6GL84-1JB0 performs its documented product-family role with the configured companion equipment.
-
01 · WATER & WASTEWATER
Align high-lift pump speed with Vdu Volta process control
In the automation chain for the pump motors, discharge headers and pressure loops, 6SE7038-6GL84-1JB0 operates in its approved product-family role as a Vdu Volta Divider Module. During demand increase, the system uses this function to adjust motor speed from the process demand signal, helping it maintain the required pressure with less throttling. -
02 · PLASTICS & PACKAGING
Verify form-fill-seal with Vdu Volta process control
In the automation chain for the film feed, sealing jaws and discharge belts, 6SE7038-6GL84-1JB0 operates in its approved product-family role as a Vdu Volta Divider Module. During speed ramp, the system uses this function to correct material position before sealing or cutting, helping it keep seals and cuts aligned with the product. -
03 · MINING & METALS
Regulate crane motion during positioning approach
As part of the hoists, trolleys and travel drives, 6SE7038-6GL84-1JB0 provides its specified system function as a Vdu Volta Divider Module. During positioning approach, the system uses this function to shape acceleration and braking around the commanded move, helping it place the load without excessive swing.
Technical specifications for 6SE7038-6GL84-1JB0
-
Product Model6SE7038-6GL84-1JB0
-
Product ParametersVDU voltage divider module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassVDU voltage divider module
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionScales high DC voltage for control measurement
-
Power ArchitectureDigital converter electronics
-
Voltage ClassUp to 1000 V DC input
-
Current Rating±10 V measurement output
-
Control Supply24 V DC electronics
-
Power SectionDC-link sensing section
-
Mechanical DesignPlug-in service assembly
-
Electrical InterfaceHigh-voltage input and signal output
-
Cooling IntegrationCabinet cooling arrangement
-
Board Designation6SE7038-6GL84-1JB0 assembly
-
Service RoleSiemens service component
-
Product StatusVerify installed revision
-
Commissioning CheckRun diagnostics and functional test
View all additional
Alternative Names
6SE7038 6GL84 1JB0
SIMOVERT MASTERDRIVES VDU voltage divider module
Siemens VDU voltage divider module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SE7038-6GL84-1JB0 to the installed SIMOVERT MASTERDRIVES
Siemens 6SE7038-6GL84-1JB0 is a VDU voltage divider module used in the SIMOVERT MASTERDRIVES to scale high DC voltage for control measurement. Its digital converter electronics architecture must match the documented drive configuration, controlled hardware arrangement and assigned dc-link sensing section.
Before integration, confirm the up to 1000 v dc input, ±10 v measurement output and 24 v dc electronics. Compare the complete article, plug-in service assembly and high-voltage input and signal output with the installed equipment, cable schedule and the technical data recorded in the product PDF.
Maintain the documented cabinet cooling arrangement, isolate all hazardous energy and apply ESD protection before handling the component. Complete the specified action to run diagnostics and functional test, then review Siemens diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6SE7038-6GL84-1JB0
- Operating role: Scales high DC voltage for control measurement
- Connection class: High-voltage input and signal output
The Siemens 6SE7038-6GL84-1JB0 requires documented system integration for its dc-link sensing section, with the final run diagnostics and functional test result recorded before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SE7038-6GL84-1JB0 configuration before exchange
Treat 6SE7038-6GL84-1JB0 as a configuration-specific VDU voltage divider module for the SIMOVERT MASTERDRIVES. Match the complete Siemens article identity, 6SE7038-6GL84-1JB0 assembly, installed hardware revision, siemens service component and documented dc-link sensing section before removing the original component.
Photograph the plug-in service assembly, high-voltage input and signal output, cable labels, shielding, protective-earth points and adjacent assemblies. Record the up to 1000 v dc input, ±10 v measurement output and 24 v dc electronics so the replacement can be checked against the controlled drive documentation.
After installation, run diagnostics and functional test. Restore only the approved project data and interface assignments, review power-stage or controller diagnostics, test the control or power path associated with scales high dc voltage for control measurement at a controlled operating point and retain the measured results in the maintenance record.
Features:
- Article and board: 6SE7038-6GL84-1JB0 assembly
- Interface record: High-voltage input and signal output
- Release test: Run diagnostics and functional test
The Siemens 6SE7038-6GL84-1JB0 requires documented replacement verification for its dc-link sensing section, with the final run diagnostics and functional test result recorded before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SE7038-6GL84-1JB0
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SE7038-6GL84-1JB0 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size12.2 × 5.1 × 15.2 cm
-
Shipping weight0.38 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7038-6GL84-1JB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What function makes the VDU divider module model-specific?
The VDU divider module is used in the documented SIMOVERT MASTERDRIVES configuration for scales high dc voltage for control measurement. -
Why is 1000 V DC input · ±10 V checked before exchange for the VDU divider module?
For the VDU divider module, match Up to 1000 V DC input and ±10 V measurement output to the installed equipment nameplate. -
Which power architecture is involved for the VDU divider module?
The VDU divider module performs scales high dc voltage for control measurement through the digital converter electronics. -
What must match the VDU 1JB0 module designation for the VDU divider module?
For the VDU divider module, record 6SE7038-6GL84-1JB0 assembly together with the complete article and installed revision. -
How is damage at high-voltage input and signal output detected for the VDU divider module?
On the VDU divider module, inspect high-voltage input and signal output for keying, damage, contamination, routing and secure seating. -
Which 24 v dc electronics condition is measured first for the VDU divider module?
Before energizing the VDU divider module, measure 24 v dc electronics and confirm the documented polarity or phase condition. -
What prevents an incorrect replacement for the VDU divider module?
A VDU divider module replacement must match its electrical class, section role, companion hardware and mechanical interface. -
How is normal operation confirmed for the VDU divider module?
For the VDU divider module, run diagnostics and functional test; then record diagnostics and the controlled functional-test result.
READY TO VERIFY YOUR PART?
Get a 6SE7038-6GL84-1JB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
