PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SE7090-0XX84-0BJ0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7090-0XX84-0BJ0 MASTERDRIVES option control module
Siemens 6SE7090-0XX84-0BJ0 is a MASTERDRIVES option control module used in the SIMOVERT MASTERDRIVES. It adds configured control and interface functions to the converter and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 24 V DC electronics, Signal-level option I/O, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 24 V DC electronics, Signal-level option I/O, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete MASTERDRIVES option control module
ACTUAL APPLICATIONS
Application context for 6SE7090-0XX84-0BJ0
Manufacturer documentation places the Masterdrives Option Control Module in practical drive applications. The three cases below describe different operating tasks in which 6SE7090-0XX84-0BJ0 performs its documented product-family role with the configured companion equipment.
-
01 · AUTOMOTIVE
Route body transfer with Masterdrives Option process control
Across the skid conveyors and lift stations, 6SE7090-0XX84-0BJ0 provides its specified system function as a Masterdrives Option Control Module. During model change, the system uses this function to coordinate motion requests and station interlocks, helping it keep the assembly takt moving. -
02 · PLASTICS & PACKAGING
Maintain form-fill-seal with Masterdrives Option
For the coordinated operation of the film feed, sealing jaws and discharge belts, 6SE7090-0XX84-0BJ0 provides its specified system function as a Masterdrives Option Control Module. During speed ramp, the system uses this function to correct material position before sealing or cutting, helping it keep seals and cuts aligned with the product. -
03 · PULP & PAPER
Verify stock preparation with Masterdrives Option
Across the pulp chests and refiners, 6SE7090-0XX84-0BJ0 performs its assigned control role as a Masterdrives Option Control Module. During grade change, the system uses this function to coordinate flow, consistency and equipment permissives, helping it deliver stable stock to the machine.
Technical specifications for 6SE7090-0XX84-0BJ0
-
Product Model6SE7090-0XX84-0BJ0
-
Product ParametersMASTERDRIVES option control module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassMASTERDRIVES option control module
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionAdds configured control and interface functions to the converter
-
Power ArchitectureDigital option platform
-
Voltage Class24 V DC electronics
-
Current RatingSignal-level option I/O
-
Power SectionTechnology option slot
-
Mechanical DesignPlug-in option module
-
Electrical InterfaceBackplane, I/O and diagnostic interfaces
-
Commissioning CheckLoad configuration and test option signals
View all additional
Alternative Names
6SE7090 0XX84 0BJ0
SIMOVERT MASTERDRIVES MASTERDRIVES option control module
Siemens 0BJ0 option module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SE7090-0XX84-0BJ0 to the installed SIMOVERT MASTERDRIVES
Siemens 6SE7090-0XX84-0BJ0 is a MASTERDRIVES option control module used in the SIMOVERT MASTERDRIVES to add configured control and interface functions to the converter. Its digital option platform role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 24 V DC electronics, Signal-level option I/O, the technology option slot, plug-in option module and backplane, i/o and diagnostic interfaces. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete load configuration and test option signals, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6SE7090-0XX84-0BJ0
- Function: Adds configured control and interface functions to the converter
- Family: SIMOVERT MASTERDRIVES
The Siemens 6SE7090-0XX84-0BJ0 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SE7090-0XX84-0BJ0 identity before exchange
Treat 6SE7090-0XX84-0BJ0 as a configuration-specific MASTERDRIVES option control module for the SIMOVERT MASTERDRIVES. Match the complete Siemens article number, installed technology option slot, board or module revision, mechanical design and approved replacement record before removal.
Photograph backplane, i/o and diagnostic interfaces, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented plug-in option module and any cooling or discharge provisions while the drive is isolated.
After installation, load configuration and test option signals. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: 6SE7090-0XX84-0BJ0
- Installed section: Technology option slot
- Release check: Load configuration and test option signals
The Siemens 6SE7090-0XX84-0BJ0 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for 6SE7090-0XX84-0BJ0
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SE7090-0XX84-0BJ0 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size30 × 20 × 4 cm
-
Shipping weight0.6 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7090-0XX84-0BJ0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What documented job requires 6SE7090-0XX84-0BJ0 for option function control in SIMOVERT MASTERDRIVES?
Use 6SE7090-0XX84-0BJ0 only for adds configured control and interface functions to the converter in the documented SIMOVERT MASTERDRIVES. Engineering must confirm the installed technology option slot, 24 V DC electronics and controlled drawing before work. -
Which measurements help diagnose backplane signal route faults around the 0BJ0 option module?
For 6SE7090-0XX84-0BJ0, review drive alarms, DC-link or supply readings, command status, backplane, i/o and diagnostic interfaces and the physical condition of the 0BJ0 option module. Compare results with a known-good channel where the site procedure permits. -
Which wiring and hardware records are needed before a 6SE7090-0XX84-0BJ0 replacement?
Before removing 6SE7090-0XX84-0BJ0, save parameters where applicable and photograph the plug-in option module, connector keys, cable labels, shield and protective-earth routes, adjacent assemblies and full nameplate. -
Which post-replacement tests release the 0BJ0 option module back to service?
After installation, load configuration and test option signals. Maintenance should then review diagnostics, prove the configuration acceptance under controlled conditions and record the final result before production release. -
How can a buyer authenticate 6SE7090-0XX84-0BJ0 as the correct 0BJ0 option module?
Match the complete 6SE7090-0XX84-0BJ0 article, 0BJ0 option module, 24 V DC electronics, Signal-level option I/O, hardware suffix and installed SIMOVERT MASTERDRIVES configuration. A similar appearance or shortened article number is insufficient. -
Which revision, condition and accessory details should a seller state for 6SE7090-0XX84-0BJ0?
The offer for 6SE7090-0XX84-0BJ0 should state label revision, new or surplus condition, visible inspection result and whether connectors, memory, software, manuals or other accessories are included. Unlisted accessories are excluded. -
Which delivery details should appear on a quotation for 6SE7090-0XX84-0BJ0?
For 6SE7090-0XX84-0BJ0, request confirmed stock status, dispatch time, ship-from location, packed size, shipping weight and courier options. The written quotation controls the final delivery terms. -
What paperwork should procurement request with the 0BJ0 option module?
A 6SE7090-0XX84-0BJ0 quotation should identify the supplied Data Sheet and Installation Instructions, 12-month AMIKON warranty, HS reference, origin, return conditions and any document or licence limitations.
READY TO VERIFY YOUR PART?
Get a 6SE7090-0XX84-0BJ0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
