AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 System
- 3300/55-01-04-12-12-00-00-05-00
In Stock
Ships by Wednesday, August 12
Fast Shipping Available
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 3300/55-01-04-12-12-00-00-05-00
-
Product Model3300/55-01-04-12-12-00-00-05-00
-
Spare Model3300/55
-
Product ParametersDual Velocity Monitor
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size5.1x33.0x20.3cm
-
ManufacturerBently Nevada
-
Weight0.3 kg
-
Channel Input OptionDual Velocity Inputs: Channels A & B indicate in peak velocity.
-
Transducer Type OptionVelomitor 100 mV/in/s
-
Channel A Full-scale Range Option0 - 20 mm/s pk
-
Channel B Full-scale Range Option0 - 20 mm/s pk
-
Agency Approval OptionNot Required
-
Intrinsic Safety BarriersNone
-
Alarm Relay OptionEpoxy-sealed (Velomitor)
-
Trip Multiply OptionNone
Description
The 3300/55 Dual Velocity Monitor provides two channels of continuous on-line machinery vibration monitoring. The monitor accepts inputs from one or two Velomitor@transducers, High Temperature Velomitor Systems (HTVS), or Velocity Seismoprobe®transducers without the need for interface modules. Flexibility is designed into the Dual Velocity Monitor. Many user-selectable options,such as high-andlow-passfilter corner frequency options can be easily (re)programmed in the field with plug-in jumpers.
Information
Overview
Manuals
Application Notes
Product Applications
Electrical Connections
Features:
- Machinery Vibration Monitoring
- Provides Two Channels
- User-Selectable Options
The 3300/55-01-04-12-12-00-00-05-00 Bently Nevada Dual Velocity Monitor may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 3300/55-01-04-12-12-00-00-05-00 Dual Velocity Monitor Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
If housing measurements are being made for overall protection of the machine, thought should be given to the usefulness of the measurement for each application. Most common machine malfunctions (imbalance, misalignment, etc.) originate at the rotor and cause an increase (or at least a change) in rotor vibration. In order for any housing measurement alone to be effective for overall
machine protection, a significant amount of rotor vibration must be faithfully transmitted to the bearing housing or machine casing, or more specifically, to the mounting location of the transducer.
In addition, care should be exercised in the physical installation of the
transducer. Improper installation can result in a decrease of the transducer amplitude and frequency response and/or the generation of signals that do not represent actual machine vibration.
Upon request, we can provide engineering services to determine the
appropriateness of housing measurements for the machine in question and/or to provide installation assistance.
- Pumps & Compressors: Tracks high-speed shaft movement and case vibration
- Industrial Turbines: Monitors structural shifts and thermal growth in gas/steam turbines
- Motors & Fans: Identifies imbalances, misalignment, or bearing wear
- Oil & Gas: Applied across upstream platforms and downstream refineries
- Power Generation: Used on critical equipment in thermal, hydro, and wind facilities
- Heavy Manufacturing: Deployed in mining, pulp/paper, and heavy chemical processing plants
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Field wiring: Connect the signal leads from the interconnect cable to the designated A and B terminals on the rear panel of the 3300/55 module.
Channel mapping: Wire lead A to the Channel A input terminal and lead B to the Channel B input terminal on the rear terminal strip.
Shield grounding: Ground the cable shield at one end only (typically at the rack/barrier end) to prevent ground loops and electrical noise.
Front access: Use the front-panel BNC connectors for temporary signal observation and diagnostic testing.
Alternative Names
3300/55-01-04-12-12-00-00-05-OO
3300/55-01-04-12-12-00-00-O5-00
3300/55-01-04-12-12-00-OO-05-00
3300/55-01-04-12-12-OO-00-05-00
3300/55-01-04-12-I2-00-00-05-00
3300/55-01-04-I2-12-00-00-05-00
3300/55-01-O4-12-12-00-00-05-00
3300/55-O1-04-12-12-00-00-05-00
3300/55-0I-04-12-12-00-00-05-00
3300-55-01-04-12-12-00-00-05-00
Technical notes
The 3300/55-01-04-03-03-00-00-05-00 Dual Velocity Monitor provides two channels of continuous on-line machinery vibration monitoring. The monitor accepts inputs from one or two Velomitor transducers, High Temperature Velomitor Systems (HTVS), or Velocity Seismoprobe transducers without the need for interface modules.
FAQs
-
What sensors can be connected directly?
+The monitor accepts inputs from one or two Bently Nevada Velomitor transducers, High-Temperature Velomitor Systems (HTVS), or standard 2-wire Velocity Seismoprobe transducers. No external interface modules are required. -
How do I verify if a sensor/cable is functioning?
+Use a multimeter in resistance mode to perform an ohm check. Check for continuity between the cable jacket and ground; any measurable resistance indicates a grounded conductor fault requiring investigation. -
What happens during a User Invoked Self-Test?
+The monitor tests its internal circuitry. If faults were logged during cyclic operation, the OK LEDs flash rapidly at 5 Hz, and specific error codes display on the LCD bargraph.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
