PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SE7041-8EK85-1MA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7041-8EK85-1MA0 PER2 rectifier interface module
Siemens 6SE7041-8EK85-1MA0 is a PER2 rectifier interface module for the SIMOVERT MASTERDRIVES. It is used to interfaces regenerative infeed control. Confirm the complete article number, installed drive, electrical class, interfaces and cooling arrangement before ordering.
BEFORE YOU BUY
Confirm the complete PER2 rectifier interface module
ACTUAL APPLICATIONS
Application context for 6SE7041-8EK85-1MA0
Manufacturer documentation places the Per2 Rectifier Interface Module in practical drive applications. The three cases below describe different operating tasks in which 6SE7041-8EK85-1MA0 performs its documented product-family role with the configured companion equipment.
-
01 · PULP & PAPER
Observe stock preparation with Per2 Rectifier
At the control layer of the pulp chests and refiners, 6SE7041-8EK85-1MA0 provides its specified system function as a Per2 Rectifier Interface Module. During grade change, the system uses this function to coordinate flow, consistency and equipment permissives, helping it deliver stable stock to the machine. -
02 · AUTOMOTIVE
Support paint-shop conveying with Per2 Rectifier
During operation of the carrier tracking and booth interfaces, 6SE7041-8EK85-1MA0 serves its documented function as a Per2 Rectifier Interface Module. During carrier accumulation, the system uses this function to route carriers by production status, helping it preserve body order through the process. -
03 · MINING & METALS
Manage bulk conveying with Per2 Rectifier process control
As part of the feeders, belts and transfer chutes, 6SE7041-8EK85-1MA0 serves its documented function as a Per2 Rectifier Interface Module. During material surge, the system uses this function to adapt equipment demand to material flow, helping it reduce spillage and belt overload.
Technical specifications for 6SE7041-8EK85-1MA0
-
Product Model6SE7041-8EK85-1MA0
-
Product ParametersPER2 rectifier interface module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassPER2 rectifier interface
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionInterfaces regenerative infeed control
-
Power ArchitectureThree-phase rectifier feedback stage
-
Voltage Class380–480 V AC
-
Current RatingDesign H/K interface class
-
Control SupplyExternal 24 V DC
-
Power SectionInfeed/regenerative section
-
Mechanical DesignDesign H and K board
-
Electrical InterfaceRectifier control connectors
-
Cooling IntegrationCabinet-cooled converter assembly
-
Board Designation6SE7041-8EK85-1MA0 PER2
-
Service RoleRegenerative-unit service spare
-
Product StatusLegacy Siemens module
-
Commissioning CheckVerify PER2 voltage coding
View all additional
Alternative Names
6SE7041 8EK85 1MA0
SIMOVERT MASTERDRIVES PER2 rectifier interface module
Siemens PER2 rectifier interface module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SE7041-8EK85-1MA0 to the installed SIMOVERT MASTERDRIVES
Siemens 6SE7041-8EK85-1MA0 is a PER2 rectifier interface module used in the SIMOVERT MASTERDRIVES.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: 6SE7041-8EK85-1MA0
- Product class: PER2 rectifier interface module
- Family: SIMOVERT MASTERDRIVES
The Siemens 6SE7041-8EK85-1MA0 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SE7041-8EK85-1MA0 identity before exchange
Replace 6SE7041-8EK85-1MA0 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact 6SE7041-8EK85-1MA0 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens 6SE7041-8EK85-1MA0 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SE7041-8EK85-1MA0
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SE7041-8EK85-1MA0 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size36.5 × 28.5 × 3.5 cm
-
Shipping weight0.72 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7041-8EK85-1MA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does PER2 mean for 6SE7041-8EK85-1MA0?
PER2 identifies the rectifier interface used for the infeed and regenerative feedback section. -
Which mains range belongs to the 8EK version?
The documented equipment class is 380–480 V three-phase AC at 50/60 Hz. -
Are Designs H and K both covered by this interface?
The module is identified for those mechanical designs, but the installed drive code must still be checked. -
What is connected through the rectifier interface?
Control, status and firing-related paths between the converter electronics and the infeed/regenerative power section are connected. -
Why must PER2 and PER3 boards not be mixed?
Their circuit function and application designation differ even when the board outlines appear similar. -
Which external supply should be confirmed?
Verify the documented 24 V DC auxiliary feed and its connector polarity before inserting the module. -
What should be recorded from the regenerative unit?
Capture its complete nameplate, design size, mains voltage and existing PER2 board revision. -
How is regenerative operation checked after service?
Test line-side status and controlled regeneration under the site procedure while observing current and converter diagnostics.
READY TO VERIFY YOUR PART?
Get a 6SE7041-8EK85-1MA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
