PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SE7041-8HK85-1HA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
Siemens 6SE7041-8HK85-1HA0 is a PER2 rectifier interface module for the SIMOVERT MASTERDRIVES. The exact article number defines its electrical class, section role and installed interface.
Verify the complete nameplate, voltage rating, current class, mating hardware, cooling arrangement and drive documentation before replacement. Commission the repaired power path under the approved site procedure.
Verify the complete nameplate, voltage rating, current class, mating hardware, cooling arrangement and drive documentation before replacement. Commission the repaired power path under the approved site procedure.
ACTUAL APPLICATIONS
Application context for 6SE7041-8HK85-1HA0
Manufacturer documentation places the Per2 Rectifier Interface Module in practical drive applications. The three cases below describe different operating tasks in which 6SE7041-8HK85-1HA0 performs its documented product-family role with the configured companion equipment.
-
01 · MACHINERY MANUFACTURING
Route press sequencing with Per2 Rectifier process control
For the coordinated operation of the feed systems, dies and safety interfaces, 6SE7041-8HK85-1HA0 handles its designated signal or control duty as a Per2 Rectifier Interface Module. During part change, the system uses this function to apply the selected product recipe to the sequence, helping it produce the intended part without skipping an interlock. -
02 · OIL & GAS
Integrate pipeline-pump speed with Per2 Rectifier
During operation of the mainline pump motors and pressure-control loops, 6SE7041-8HK85-1HA0 supports the configured automation role as a Per2 Rectifier Interface Module. During throughput change, the system uses this function to change motor speed with the commanded line flow, helping it maintain controlled pipeline pressure. -
03 · AUTOMOTIVE
Integrate powertrain assembly with Per2 Rectifier
Inside the machining cells and pallet systems, 6SE7041-8HK85-1HA0 provides its specified system function as a Per2 Rectifier Interface Module. During quality-hold release, the system uses this function to hand off part identity with the machine sequence, helping it retain traceability at the next operation.
Technical specifications for 6SE7041-8HK85-1HA0
-
Product Model6SE7041-8HK85-1HA0
-
Product ParametersPER2 rectifier interface module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassPER2 rectifier interface
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionInterfaces infeed and regenerative unit
-
Power ArchitectureThree-phase rectifier feedback control
-
Voltage Class500–575 V / 660–690 V AC
-
Current RatingDesign H/K interface class
-
Line Frequency50/60 Hz
-
Power SectionInfeed and regenerative section
-
Mechanical DesignDesigns H and K
-
Electrical InterfaceRectifier control connectors
-
Cooling IntegrationCabinet-cooled drive assembly
-
Board ProtectionIndustrial interface board
-
Busbar TreatmentInternal converter busbars
-
Service ClassificationSiemens spare part
-
Commissioning CheckVerify PER2 high-voltage code
View all additional
Alternative Names
6SE7041 8HK85 1HA0
SIMOVERT MASTERDRIVES PER2 rectifier interface module
Siemens PER2 rectifier interface module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SE7041-8HK85-1HA0 to the installed SIMOVERT MASTERDRIVES
Siemens 6SE7041-8HK85-1HA0 is a PER2 rectifier interface module used in the SIMOVERT MASTERDRIVES.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: 6SE7041-8HK85-1HA0
- Product class: PER2 rectifier interface module
- Family: SIMOVERT MASTERDRIVES
The Siemens 6SE7041-8HK85-1HA0 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SE7041-8HK85-1HA0 identity before exchange
Replace 6SE7041-8HK85-1HA0 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact 6SE7041-8HK85-1HA0 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens 6SE7041-8HK85-1HA0 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SE7041-8HK85-1HA0
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SE7041-8HK85-1HA0 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size36.5 × 28.5 × 3.5 cm
-
Shipping weight0.72 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7041-8HK85-1HA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What function does the high-voltage PER2 interface perform?
In 6SE7041-8HK85-1HA0, it performs interfaces infeed and regenerative unit within the documented SIMOVERT MASTERDRIVES configuration. -
Which electrical rating applies to the high-voltage PER2 interface?
For 6SE7041-8HK85-1HA0, verify 500–575 V / 660–690 V AC and Design H/K interface class against the installed power section. -
How should the Infeed and regenerative section be recorded for the high-voltage PER2 interface?
Before removing 6SE7041-8HK85-1HA0, photograph the exact section position, labels and adjacent assemblies. -
Which connection checks matter for the high-voltage PER2 interface?
Inspect Rectifier control connectors on 6SE7041-8HK85-1HA0 for orientation, contact condition, clearance and correct seating. -
How is cooling preserved for the high-voltage PER2 interface?
For 6SE7041-8HK85-1HA0, preserve the documented thermal path, seals, airflow or coolant arrangement: Cabinet-cooled drive assembly. -
Can the high-voltage PER2 interface replace a similar Siemens component?
Match the full 6SE7041-8HK85-1HA0 article number, section role, board designation and mechanical interface; appearance is insufficient. -
Which test releases the high-voltage PER2 interface to service?
For 6SE7041-8HK85-1HA0: Verify PER2 high-voltage code. Then verify insulation, diagnostics and the affected drive function. -
What quotation details identify the high-voltage PER2 interface?
Provide the 6SE7041-8HK85-1HA0 nameplate, installed Infeed and regenerative section, Rectifier control connectors, quantity, photographs and destination.
READY TO VERIFY YOUR PART?
Get a 6SE7041-8HK85-1HA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
