PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SE7090-0XX87-0BB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7090-0XX87-0BB0 T100 technology control board
Siemens 6SE7090-0XX87-0BB0 is a T100 technology control board in the SIMOVERT MASTERDRIVES. It is used to provide the documented control, processing or interface function within the associated equipment.
Its documented configuration includes component class of T100 technology control board, drive family of SIMOVERT MASTERDRIVES, primary function of Runs configured technology functions, and power architecture of T100 programmable platform. During operation, the T100 technology control board performs its assigned T100 technology control board function through the documented power, signal and communication interfaces.
Its documented configuration includes component class of T100 technology control board, drive family of SIMOVERT MASTERDRIVES, primary function of Runs configured technology functions, and power architecture of T100 programmable platform. During operation, the T100 technology control board performs its assigned T100 technology control board function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete T100 technology control board
ACTUAL APPLICATIONS
Application context for 6SE7090-0XX87-0BB0
Manufacturer documentation places the T100 Technology Control Board in practical drive applications. The three cases below describe different operating tasks in which 6SE7090-0XX87-0BB0 performs its documented product-family role with the configured companion equipment.
-
01 · PULP & PAPER
Observe reel and winder operation with T100 Technology
As part of the reels, slitters and winding drums, 6SE7090-0XX87-0BB0 handles its designated signal or control duty as a T100 Technology Control Board. During roll change, the system uses this function to synchronize winding torque with roll diameter, helping it build a roll with controlled tension. -
02 · MINING & METALS
Govern rolling-mill coordination during load transition
As part of the mill stands and cooling sections, 6SE7090-0XX87-0BB0 performs its assigned control role as a T100 Technology Control Board. During load transition, the system uses this function to coordinate material handoff with the active production pass, helping it hold the rolling sequence inside its process window. -
03 · WATER & WASTEWATER
Coordinate sludge-pump control with T100 Technology
Inside the positive-displacement pumps and flow feedback, 6SE7090-0XX87-0BB0 operates in its approved product-family role as a T100 Technology Control Board. During solids-loading change, the system uses this function to hold the commanded feed rate as process load changes, helping it keep sludge transfer stable.
Technical specifications for 6SE7090-0XX87-0BB0
-
Product Model6SE7090-0XX87-0BB0
-
Product ParametersT100 technology control board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassT100 technology control board
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionRuns configured technology functions
-
Power ArchitectureT100 programmable platform
-
Voltage ClassInternal drive-electronics class
-
Current RatingApplication-defined signal channels
-
Control SupplyDrive internal supply
-
Power SectionTechnology option slot
-
Mechanical DesignBoard with hardware instructions
-
Electrical InterfaceBackplane and option interfaces
-
Cooling IntegrationControl-cabinet airflow
-
Board Designation6SE7090-0XX87-0BB0 T100
-
Service RoleBoard supplied without software
-
Product StatusLegacy Siemens module
-
Commissioning CheckLoad software and validate technology I/O
View all additional
Alternative Names
6SE7090 0XX87 0BB0
SIMOVERT MASTERDRIVES T100 technology control board
Siemens T100 technology control board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SE7090-0XX87-0BB0 to the installed SIMOVERT MASTERDRIVES
Siemens 6SE7090-0XX87-0BB0 is a T100 technology control board used in the SIMOVERT MASTERDRIVES to run configured technology functions. Its t100 programmable platform architecture must match the documented drive configuration, controlled hardware arrangement and assigned technology option slot.
Before integration, confirm the internal drive-electronics class, application-defined signal channels and drive internal supply. Compare the complete article, board with hardware instructions and backplane and option interfaces with the installed equipment, cable schedule and the technical data recorded in the product PDF.
Maintain the documented control-cabinet airflow, isolate all hazardous energy and apply ESD protection before handling the component. Complete the specified action to load software and validate technology i/o, then review Siemens diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6SE7090-0XX87-0BB0
- Operating role: Runs configured technology functions
- Connection class: Backplane and option interfaces
The Siemens 6SE7090-0XX87-0BB0 requires documented system integration for its technology option slot, with the final load software and validate technology i/o result recorded before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SE7090-0XX87-0BB0 configuration before exchange
Treat 6SE7090-0XX87-0BB0 as a configuration-specific T100 technology control board for the SIMOVERT MASTERDRIVES. Match the complete Siemens article identity, 6SE7090-0XX87-0BB0 T100, installed hardware revision, board supplied without software and documented technology option slot before removing the original component.
Photograph the board with hardware instructions, backplane and option interfaces, cable labels, shielding, protective-earth points and adjacent assemblies. Record the internal drive-electronics class, application-defined signal channels and drive internal supply so the replacement can be checked against the controlled drive documentation.
After installation, load software and validate technology i/o. Restore only the approved project data and interface assignments, review power-stage or controller diagnostics, test the control or power path associated with runs configured technology functions at a controlled operating point and retain the measured results in the maintenance record.
Features:
- Article and board: 6SE7090-0XX87-0BB0 T100
- Interface record: Backplane and option interfaces
- Release test: Load software and validate technology I/O
The Siemens 6SE7090-0XX87-0BB0 requires documented replacement verification for its technology option slot, with the final load software and validate technology i/o result recorded before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SE7090-0XX87-0BB0
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SE7090-0XX87-0BB0 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size26.5 × 12.6 × 2.4 cm
-
Shipping weight0.2 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7090-0XX87-0BB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Why is the T100 technology board installed?
The T100 technology board is used in the documented SIMOVERT MASTERDRIVES configuration for runs configured technology functions. -
What does the Drive electronics class class describe for the T100 technology board?
For the T100 technology board, match Internal drive-electronics class and Application-defined signal channels to the installed equipment nameplate. -
Which section contains this component for the T100 technology board?
The T100 technology board performs runs configured technology functions through the t100 programmable platform. -
How is T100 0BB0 hardware distinguished from revisions for the T100 technology board?
For the T100 technology board, record 6SE7090-0XX87-0BB0 T100 together with the complete article and installed revision. -
What condition should be checked on backplane and option interfaces for the T100 technology board?
On the T100 technology board, inspect backplane and option interfaces for keying, damage, contamination, routing and secure seating. -
Which auxiliary source requires measurement for the T100 technology board?
Before energizing the T100 technology board, measure drive internal supply and confirm the documented polarity or phase condition. -
Does physical fit prove compatibility for the T100 technology board?
A T100 technology board replacement must match its electrical class, section role, companion hardware and mechanical interface. -
What evidence is saved after start-up for the T100 technology board?
For the T100 technology board, load software and validate technology i/o; then record diagnostics and the controlled functional-test result.
READY TO VERIFY YOUR PART?
Get a 6SE7090-0XX87-0BB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
