PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SX7010-0FJ50
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SX7010-0FJ50 SIMOLINK fiber cable kit
Siemens 6SX7010-0FJ50 is a SIMOLINK fiber cable kit in the SIMOVERT MASTERDRIVES. It is used to provide the documented electrical or communication connection between compatible components.
Its documented configuration includes component class of SIMOLINK fiber cable kit, drive family of SIMOVERT MASTERDRIVES, primary function of Connects SLB communication modules over fiber, and power architecture of Fiber-optic communication link. During operation, the SIMOLINK fiber cable kit performs its assigned SIMOLINK fiber cable kit function through the documented power, signal and communication interfaces.
Its documented configuration includes component class of SIMOLINK fiber cable kit, drive family of SIMOVERT MASTERDRIVES, primary function of Connects SLB communication modules over fiber, and power architecture of Fiber-optic communication link. During operation, the SIMOLINK fiber cable kit performs its assigned SIMOLINK fiber cable kit function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete SIMOLINK fiber cable kit
ACTUAL APPLICATIONS
Application context for 6SX7010-0FJ50
Manufacturer documentation places the Simolink Fiber Cable Kit in practical drive applications. The three cases below describe different operating tasks in which 6SX7010-0FJ50 performs its documented product-family role with the configured companion equipment.
-
01 · AUTOMOTIVE
Support robotic joining with Simolink Fiber process control
Within the robots, fixtures and clamp groups, 6SX7010-0FJ50 handles its designated signal or control duty as a Simolink Fiber Cable Kit. During station restart, the system uses this function to confirm tooling readiness before the cycle starts, helping it prevent an incomplete joining cycle. -
02 · PULP & PAPER
Supervise stock preparation with Simolink Fiber
In the automation chain for the pulp chests and refiners, 6SX7010-0FJ50 supports the configured automation role as a Simolink Fiber Cable Kit. During grade change, the system uses this function to coordinate flow, consistency and equipment permissives, helping it deliver stable stock to the machine. -
03 · PLASTICS & PACKAGING
Support palletizing during product-gap recovery
As part of the case conveyors and robot cells, 6SX7010-0FJ50 provides its specified system function as a Simolink Fiber Cable Kit. During product-gap recovery, the system uses this function to restore coordinated flow after a controlled stop, helping it return the line to stable throughput.
Technical specifications for 6SX7010-0FJ50
-
Product Model6SX7010-0FJ50
-
Product ParametersSIMOLINK fiber cable kit
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassSIMOLINK fiber cable kit
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionConnects SLB communication modules over fiber
-
Power ArchitectureFiber-optic communication link
-
Voltage ClassOptical communication class
-
Current RatingFiber link signal path
-
Control SupplyPassive optical connection
-
Power SectionSIMOLINK communication path
-
Mechanical DesignConnector and 100 m cable kit
-
Electrical InterfaceSLB connectors and fiber cable
-
Cooling IntegrationNo active cooling required
-
Board Designation6SX7010-0FJ50 assembly
-
Service RoleSiemens service component
-
Product StatusVerify installed revision
-
Commissioning CheckTest optical link and node traffic
View all additional
Alternative Names
6SX7010 0FJ50
SIMOVERT MASTERDRIVES SIMOLINK fiber cable kit
Siemens SIMOLINK fiber cable kit
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SX7010-0FJ50 to the installed SIMOVERT MASTERDRIVES
Siemens 6SX7010-0FJ50 is a SIMOLINK fiber cable kit used in the SIMOVERT MASTERDRIVES to connect SLB communication modules over fiber. Its fiber-optic communication link architecture must match the documented drive configuration, controlled hardware arrangement and assigned simolink communication path.
Before integration, confirm the optical communication class, fiber link signal path and passive optical connection. Compare the complete article, connector and 100 m cable kit and slb connectors and fiber cable with the installed equipment, cable schedule and the technical data recorded in the product PDF.
Maintain the documented no active cooling required, isolate all hazardous energy and apply ESD protection before handling the component. Complete the specified action to test optical link and node traffic, then review Siemens diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6SX7010-0FJ50
- Operating role: Connects SLB communication modules over fiber
- Connection class: SLB connectors and fiber cable
The Siemens 6SX7010-0FJ50 requires documented system integration for its simolink communication path, with the final test optical link and node traffic result recorded before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SX7010-0FJ50 configuration before exchange
Treat 6SX7010-0FJ50 as a configuration-specific SIMOLINK fiber cable kit for the SIMOVERT MASTERDRIVES. Match the complete Siemens article identity, 6SX7010-0FJ50 assembly, installed hardware revision, siemens service component and documented simolink communication path before removing the original component.
Photograph the connector and 100 m cable kit, slb connectors and fiber cable, cable labels, shielding, protective-earth points and adjacent assemblies. Record the optical communication class, fiber link signal path and passive optical connection so the replacement can be checked against the controlled drive documentation.
After installation, test optical link and node traffic. Restore only the approved project data and interface assignments, review power-stage or controller diagnostics, test the control or power path associated with connects slb communication modules over fiber at a controlled operating point and retain the measured results in the maintenance record.
Features:
- Article and board: 6SX7010-0FJ50 assembly
- Interface record: SLB connectors and fiber cable
- Release test: Test optical link and node traffic
The Siemens 6SX7010-0FJ50 requires documented replacement verification for its simolink communication path, with the final test optical link and node traffic result recorded before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SX7010-0FJ50
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SX7010-0FJ50 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size37.5 × 23.2 × 2.3 cm
-
Shipping weight0.48 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85447000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SX7010-0FJ50
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What function makes the 100 m SIMOLINK cable kit model-specific?
The 100 m SIMOLINK cable kit is used in the documented SIMOVERT MASTERDRIVES configuration for connects slb communication modules over fiber. -
Why is 100 m fiber-optic link checked before exchange for the 100 m SIMOLINK cable kit?
For the 100 m SIMOLINK cable kit, match Optical communication class and Fiber link signal path to the installed equipment nameplate. -
Which power architecture is involved for the 100 m SIMOLINK cable kit?
The 100 m SIMOLINK cable kit performs connects slb communication modules over fiber through the fiber-optic communication link. -
What must match the SLB connector kit designation for the 100 m SIMOLINK cable kit?
For the 100 m SIMOLINK cable kit, record 6SX7010-0FJ50 assembly together with the complete article and installed revision. -
How is damage at slb connectors and fiber cable detected for the 100 m SIMOLINK cable kit?
On the 100 m SIMOLINK cable kit, inspect slb connectors and fiber cable for keying, damage, contamination, routing and secure seating. -
Which passive optical connection condition is measured first for the 100 m SIMOLINK cable kit?
Before energizing the 100 m SIMOLINK cable kit, measure passive optical connection and confirm the documented polarity or phase condition. -
What prevents an incorrect replacement for the 100 m SIMOLINK cable kit?
A 100 m SIMOLINK cable kit replacement must match its electrical class, section role, companion hardware and mechanical interface. -
How is normal operation confirmed for the 100 m SIMOLINK cable kit?
For the 100 m SIMOLINK cable kit, test optical link and node traffic; then record diagnostics and the controlled functional-test result.
READY TO VERIFY YOUR PART?
Get a 6SX7010-0FJ50 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
