PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SY7000-0AE02
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SY7000-0AE02 FUSE LINK 8A 600V
Siemens 6SY7000-0AE02 is a FUSE LINK 8A 600V in the Siemens drive spare parts. It is used to perform the documented FUSE LINK 8A 600V function in the installed automation equipment.
Its documented configuration includes article number of 6SY7000-0AE02, rated current of 8 A, rated voltage of 600 V, and quantity unit of 1 piece. During operation, the FUSE LINK 8A 600V performs its assigned FUSE LINK 8A 600V function through the documented power, signal and communication interfaces.
Its documented configuration includes article number of 6SY7000-0AE02, rated current of 8 A, rated voltage of 600 V, and quantity unit of 1 piece. During operation, the FUSE LINK 8A 600V performs its assigned FUSE LINK 8A 600V function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete 8 A 600 V fuse link
ACTUAL APPLICATIONS
Application context for 6SY7000-0AE02
Siemens documentation defines 6SY7000-0AE02 as a 8 A 600 V fuse link. The cases below show three distinct operating contexts in which its documented electrical function supports the complete drive system.
-
01 - GENERAL MANUFACTURING
Protect a machine-drive auxiliary circuit from overcurrent
In an automated production machine, 6SY7000-0AE02 provides the specified 8 A protection for its assigned drive circuit. The fuse isolates a sustained overcurrent before wiring or companion components exceed their documented limits. -
02 - AUTOMOTIVE
Coordinate fuse protection in assembly-line motor drives
Within an assembly-line drive cabinet, 6SY7000-0AE02 protects the designated circuit at a 600 V rating. Matching the fuse position and current class maintains the documented protective coordination for the connected drive equipment. -
03 - PLASTICS & PACKAGING
Limit fault energy in an extrusion-line drive cabinet
On an extrusion-line motor drive, 6SY7000-0AE02 interrupts excessive current in the protected branch. The 8 A fuse rating supports selective replacement without changing the electrical protection assigned by the drive documentation.
Technical specifications for 6SY7000-0AE02
-
Product Model6SY7000-0AE02
-
Product ParametersFUSE LINK 8A 600V
-
In stock1 unit
-
ManufacturerSiemens
-
Article Number6SY7000-0AE02
-
Component TypeFuse link
-
Rated Current8 A
-
Rated Voltage600 V
-
Quantity Unit1 piece
-
Brand OriginGermany
-
Fuse ElementReplaceable calibrated melting element
-
Protection FunctionOvercurrent circuit interruption
View all additional
Alternative Names
6SY7000 0AE02
SIMOVERT MASTERDRIVES simovert drive service assembly
Siemens simovert drive service assembly
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6SY7000-0AE02 to the documented 8 A 600 V fuse link position
Siemens 6SY7000-0AE02 8 A 600 V fuse link carries the ratings documented for its assigned circuit. Match the complete article number, component marking and installed equipment drawing before fitting the replacement.
Confirm the circuit position and all electrical values before connection. For 6SY7000-0AE02, verify 8 A, 600 V, Siemens spare part together with the specified drive family or frame size.
After installation, inspect the surrounding wiring and energise the equipment under controlled conditions. Confirm the protected circuit operates normally and record the final component identity in the maintenance file.
Features:
- Exact identity: 6SY7000-0AE02
- Product class: 8 A 600 V fuse link
- Family: Siemens drive spare parts
The Siemens 6SY7000-0AE02 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6SY7000-0AE02 identity and ratings before exchange
Replace 6SY7000-0AE02 only after matching the full Siemens article number and the 8 A 600 V fuse link function. Similar physical parts with different current, voltage, resistance or power ratings are not interchangeable.
Before removal, isolate the equipment, verify stored energy has dissipated and record the installed component orientation, terminal position and adjacent wiring. Preserve the controlled circuit arrangement.
After fitting the replacement, check continuity and insulation as applicable, restore protective covers and test the affected circuit at a safe operating point. Record the observed result before returning the equipment to service.
Features:
- Exact identity: 6SY7000-0AE02
- Product class: 8 A 600 V fuse link
- Family: Siemens drive spare parts
The Siemens 6SY7000-0AE02 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SY7000-0AE02
- Product class: 8 A 600 V fuse link
- Exact Siemens identity required before service
Documentation for Siemens 6SY7000-0AE02 must match the 8 A 600 V fuse link and installed circuit; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2 × 24 × 26 cm
-
Shipping weight0.56 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SY7000-0AE02
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What commissioning result should be recorded for 6SY7000-0AE02?
For 6SY7000-0AE02, record the final diagnostic state, affected drive response, alarms, measured values and responsible technician approval. -
What installed drive information should an engineer collect before sourcing 6SY7000-0AE02?
For 6SY7000-0AE02, provide the installed SIMOVERT MASTERDRIVES, cabinet section, controlled equipment, exact nameplate photographs and current configuration record. -
What should a distributor request to quote 6SY7000-0AE02 accurately?
For 6SY7000-0AE02, send the exact model, quantity, destination country, nameplate and connector photos, installed family and required document scope. -
Which diagnostics should be reviewed after fitting 6SY7000-0AE02?
For 6SY7000-0AE02, review controller, converter and interface status, fault memory and communication indications before the functional test. -
Which cable labels should be retained during a 6SY7000-0AE02 exchange?
For 6SY7000-0AE02, retain terminal numbers, plug identifiers, cable destinations, shields and earth conductors so each connection returns to its original position. -
How can procurement verify that a quotation covers the complete 6SY7000-0AE02 identity?
Require the quotation to state 6SY7000-0AE02, manufacturer, quantity, document scope and any agreed companion hardware separately. -
Which electrical limits must be checked before connecting 6SY7000-0AE02?
For 6SY7000-0AE02, confirm Installed equipment voltage class, Model-specific channel current, 24 V DC control class, isolation, protective earth and the approved equipment drawing before energising the replacement. -
How should receiving inspection be performed for 6SY7000-0AE02?
Inspect the 6SY7000-0AE02 label, housing, terminals, connectors, mounting points and packaging for damage before disturbing the installed unit.
READY TO VERIFY YOUR PART?
Get a 6SY7000-0AE02 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
