PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6RA8075-6DS22-0AA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6RA8075-6DS22-0AA0 Two-quadrant DC converter
Siemens 6RA8075-6DS22-0AA0 is a Two-quadrant DC converter in the Siemens SINAMICS. It is used to perform the documented Two-quadrant DC converter function in the installed automation equipment.
Its documented configuration includes converter topology of B6C two-quadrant armature converter, rated armature supply of 400 V 3 AC, rated input current of 174 A, and rated dc output of 485 V DC. During operation, the Two-quadrant DC converter performs its assigned Two-quadrant DC converter function through the documented power, signal and communication interfaces.
Its documented configuration includes converter topology of B6C two-quadrant armature converter, rated armature supply of 400 V 3 AC, rated input current of 174 A, and rated dc output of 485 V DC. During operation, the Two-quadrant DC converter performs its assigned Two-quadrant DC converter function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete Two-quadrant DC converter
ACTUAL APPLICATIONS
Where 6RA8075-6DS22-0AA0 Fits Across Industrial Application Areas
Applications cover metalworking, polymer processing and industrial machinery, subject to compatible drives, equipment configuration and operating conditions.
-
01 · PLASTICS PROCESSING
Plastic Processing Facilities with Extrusion and Kneading Machinery
Polymer production facilities with plastic extrusion machines and equipment.Industrial kneading machinery in polymer material preparation and processing. -
02 · MACHINERY MANUFACTURING
Mechanical Test Equipment and Industrial Lifting Machinery
Lifting and handling facilities with industrial elevators and cranes.Variable speed direct current drives in mechanical test stands. -
03 · METALWORKING
Metal Processing Plants with Rolling and Drawing Machinery
Metalworking facilities with rolling mills and industrial metal presses.Metal wire production lines equipped with wire drawing machinery.
Technical specifications for 6RA8075-6DS22-0AA0
-
Product Model6RA8075-6DS22-0AA0
-
Product ParametersTwo-quadrant DC converter
-
In stock1 unit
-
ManufacturerSiemens
-
Converter TopologyB6C two-quadrant armature converter
-
Rated Armature Supply400 V 3 AC
-
Rated Input Current174 A
-
Rated DC Output485 V DC
-
Rated DC Current210 A
-
Rated DC Power102 kW
-
Overload Capability1.8 × rated current
-
Field SupplyUp to 400 V 2 AC
-
Rated Field Current15 A DC
-
Electronics Supply380–480 V or 190–240 V 2 AC
-
Supply Frequency45 to 65 Hz
-
Cooling Requirement300 m³/h forced air
-
Sound Pressure52.4 dB(A)
-
Ambient Temperature0 to +40 °C at rated current
-
Converter Dimensions268 × 385 × 252 mm
View all additional
Alternative Names
6RA8075 6DS22 0AA0
SINAMICS DCM Two-quadrant DC converter
Siemens Two-quadrant DC converter
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6RA8075-6DS22-0AA0 to the installed SINAMICS DCM
Siemens 6RA8075-6DS22-0AA0 is a Two-quadrant DC converter used in the SINAMICS DCM.
Confirm rated dc current, rated dc power, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: 6RA8075-6DS22-0AA0
- Product class: Two-quadrant DC converter
- Family: SINAMICS DCM
The Siemens 6RA8075-6DS22-0AA0 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6RA8075-6DS22-0AA0 identity before exchange
Replace 6RA8075-6DS22-0AA0 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact 6RA8075-6DS22-0AA0 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens 6RA8075-6DS22-0AA0 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6RA8075-6DS22-0AA0
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6RA8075-6DS22-0AA0 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size26.8 × 38.5 × 25.2 cm
-
Shipping weight15 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85044095
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6RA8075-6DS22-0AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What function does the 210 A SINAMICS DCM converter perform?
In 6RA8075-6DS22-0AA0, it performs 174 a within the documented SINAMICS DCM configuration. -
Which electrical rating applies to the 210 A SINAMICS DCM converter?
For 6RA8075-6DS22-0AA0, verify 210 A and 102 kW against the installed power section. -
How should the Up to 400 V 2 AC be recorded for the 210 A SINAMICS DCM converter?
Before removing 6RA8075-6DS22-0AA0, photograph the exact section position, labels and adjacent assemblies. -
Which connection checks matter for the 210 A SINAMICS DCM converter?
Inspect 380–480 V or 190–240 V 2 AC on 6RA8075-6DS22-0AA0 for orientation, contact condition, clearance and correct seating. -
How is cooling preserved for the 210 A SINAMICS DCM converter?
For 6RA8075-6DS22-0AA0, preserve the documented thermal path, seals, airflow or coolant arrangement: 45 to 65 Hz. -
Can the 210 A SINAMICS DCM converter replace a similar Siemens component?
Match the full 6RA8075-6DS22-0AA0 article number, section role, board designation and mechanical interface; appearance is insufficient. -
Which test releases the 210 A SINAMICS DCM converter to service?
For 6RA8075-6DS22-0AA0: 268 × 385 × 252 mm. Then verify insulation, diagnostics and the affected drive function. -
What quotation details identify the 210 A SINAMICS DCM converter?
Provide the 6RA8075-6DS22-0AA0 nameplate, installed Up to 400 V 2 AC, 380–480 V or 190–240 V 2 AC, quantity, photographs and destination.
READY TO VERIFY YOUR PART?
Get a 6RA8075-6DS22-0AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
