PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SL3040-1MA00-0AA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SL3040-1MA00-0AA0 CU310-2 PN control unit
Siemens 6SL3040-1MA00-0AA0 is a CU310-2 PN control unit used in the SINAMICS S120. It controls a single drive through profinet and drive-cliq and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 24 V DC supply, 0.8 A maximum draw, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 24 V DC supply, 0.8 A maximum draw, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete CU310-2 PN control unit
ACTUAL APPLICATIONS
Application context for 6SL3040-1MA00-0AA0
Manufacturer documentation places the Cu310-2 Pn Control Unit in practical drive applications. The three cases below describe different operating tasks in which 6SL3040-1MA00-0AA0 performs its documented product-family role with the configured companion equipment.
-
01 · WATER & WASTEWATER
Track sludge-pump control with Cu310 2 process control
During operation of the positive-displacement pumps and flow feedback, 6SL3040-1MA00-0AA0 handles its designated signal or control duty as a Cu310-2 Pn Control Unit. During solids-loading change, the system uses this function to hold the commanded feed rate as process load changes, helping it keep sludge transfer stable. -
02 · PULP & PAPER
Coordinate stock preparation with Cu310 2 process control
Inside the pulp chests and refiners, 6SL3040-1MA00-0AA0 handles its designated signal or control duty as a Cu310-2 Pn Control Unit. During grade change, the system uses this function to coordinate flow, consistency and equipment permissives, helping it deliver stable stock to the machine. -
03 · MACHINERY MANUFACTURING
Monitor machine-tool automation during cycle start
For the coordinated operation of the spindles, axes and tool changers, 6SL3040-1MA00-0AA0 operates in its approved product-family role as a Cu310-2 Pn Control Unit. During cycle start, the system uses this function to coordinate the equipment states required by the active cycle, helping it complete the machining step with traceable status.
Technical specifications for 6SL3040-1MA00-0AA0
-
Product Model6SL3040-1MA00-0AA0
-
Product ParametersCU310-2 PN control unit
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassCU310-2 PN control unit
-
Drive FamilySINAMICS S120
-
Primary FunctionControls a single drive through PROFINET and DRIVE-CLiQ
-
Power ArchitectureCU310-2 control platform
-
Voltage Class24 V DC supply
-
Current Rating0.8 A maximum draw
-
Power SectionSingle-axis drive control
-
Mechanical DesignCompact control unit
-
Electrical InterfacePROFINET, DRIVE-CLiQ and Ethernet
-
Commissioning CheckRestore project and test network diagnostics
View all additional
Alternative Names
6SL3040 1MA00 0AA0
SINAMICS S120 CU310-2 PN control unit
Siemens CU310-2 PN unit
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SL3040-1MA00-0AA0 to the installed SINAMICS S120
Siemens 6SL3040-1MA00-0AA0 is a CU310-2 PN control unit used in the SINAMICS S120 to control a single drive through PROFINET and DRIVE-CLiQ. Its cu310-2 control platform role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 24 V DC supply, 0.8 A maximum draw, the single-axis drive control, compact control unit and profinet, drive-cliq and ethernet. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete restore project and test network diagnostics, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6SL3040-1MA00-0AA0
- Function: Controls a single drive through PROFINET and DRIVE-CLiQ
- Family: SINAMICS S120
The Siemens 6SL3040-1MA00-0AA0 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SL3040-1MA00-0AA0 identity before exchange
Treat 6SL3040-1MA00-0AA0 as a configuration-specific CU310-2 PN control unit for the SINAMICS S120. Match the complete Siemens article number, installed single-axis drive control, board or module revision, mechanical design and approved replacement record before removal.
Photograph profinet, drive-cliq and ethernet, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented compact control unit and any cooling or discharge provisions while the drive is isolated.
After installation, restore project and test network diagnostics. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: 6SL3040-1MA00-0AA0
- Installed section: Single-axis drive control
- Release check: Restore project and test network diagnostics
The Siemens 6SL3040-1MA00-0AA0 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for 6SL3040-1MA00-0AA0
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SL3040-1MA00-0AA0 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size17.5 × 22.5 × 10 cm
-
Shipping weight0.79 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SL3040-1MA00-0AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which power-stage task uses 6SL3040-1MA00-0AA0 for single-axis control in SINAMICS S120?
Use 6SL3040-1MA00-0AA0 only for controls a single drive through profinet and drive-cliq in the documented SINAMICS S120. Engineering must confirm the installed single-axis drive control, 24 V DC supply and controlled drawing before work. -
Which measurements help diagnose PROFINET integration faults around the CU310-2 PN unit?
For 6SL3040-1MA00-0AA0, review drive alarms, DC-link or supply readings, command status, profinet, drive-cliq and ethernet and the physical condition of the CU310-2 PN unit. Compare results with a known-good channel where the site procedure permits. -
Which wiring and hardware records are needed before a 6SL3040-1MA00-0AA0 replacement?
Before removing 6SL3040-1MA00-0AA0, save parameters where applicable and photograph the compact control unit, connector keys, cable labels, shield and protective-earth routes, adjacent assemblies and full nameplate. -
How should the network diagnostic test be commissioned after fitting 6SL3040-1MA00-0AA0?
After installation, restore project and test network diagnostics. Maintenance should then review diagnostics, prove the network diagnostic test under controlled conditions and record the final result before production release. -
What photographs support a quote for 6SL3040-1MA00-0AA0 as the correct CU310-2 PN unit?
Match the complete 6SL3040-1MA00-0AA0 article, CU310-2 PN unit, 24 V DC supply, 0.8 A maximum draw, hardware suffix and installed SINAMICS S120 configuration. A similar appearance or shortened article number is insufficient. -
Which revision, condition and accessory details should a seller state for 6SL3040-1MA00-0AA0?
The offer for 6SL3040-1MA00-0AA0 should state label revision, new or surplus condition, visible inspection result and whether connectors, memory, software, manuals or other accessories are included. Unlisted accessories are excluded. -
Which delivery details should appear on a quotation for 6SL3040-1MA00-0AA0?
For 6SL3040-1MA00-0AA0, request confirmed stock status, dispatch time, ship-from location, packed size, shipping weight and courier options. The written quotation controls the final delivery terms. -
Which warranty, document and customs records should accompany a 6SL3040-1MA00-0AA0 offer?
A 6SL3040-1MA00-0AA0 quotation should identify the supplied Data Sheet and Installation Instructions, 12-month AMIKON warranty, HS reference, origin, return conditions and any document or licence limitations.
READY TO VERIFY YOUR PART?
Get a 6SL3040-1MA00-0AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
