PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SE7035-7GK84-1JC2
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7035-7GK84-1JC2 IGD8 inverter control module
Siemens 6SE7035-7GK84-1JC2 is a IGD8 inverter control module in the SIMOVERT MASTERDRIVES converters. It is used to control the connected motor or drive function within the configured machine.
Its documented configuration includes module type of IGD8 inverter control, ac voltage range of 500 to 690 V, line frequency of 50/60 Hz, and dc link range of 675 to 930 V. During operation, the IGD8 inverter control module processes the configured drive commands and regulates the connected motor or power section.
Its documented configuration includes module type of IGD8 inverter control, ac voltage range of 500 to 690 V, line frequency of 50/60 Hz, and dc link range of 675 to 930 V. During operation, the IGD8 inverter control module processes the configured drive commands and regulates the connected motor or power section.
BEFORE YOU BUY
Confirm the complete IGD8 inverter control module
ACTUAL APPLICATIONS
Where 6SE7035-7GK84-1JC2 Fits Across Major Industry Sectors
Uses span metals, plastics and wood, subject to verified compatibility, operating conditions and project requirements.
-
01 · METALS & METALWORKING
Steel Production and Commercial Aluminum Material Processing
Steel production and material processing for industrial manufacturing demand.Aluminum production and finishing for commercial nonferrous metal markets. -
02 · PLASTICS & RUBBER
Plastic Material Manufacturing, Extrusion and Film Production
Plastic material extrusion and processing for industrial manufacturing operations.Plastic film production and converting for manufactured plastic products. -
03 · WOOD PROCESSING
Solid Wood Processing and Industrial Panel Manufacturing
Solid wood processing and machining for commercial timber production.Wood panel processing and finishing for manufactured wood products.
Technical specifications for 6SE7035-7GK84-1JC2
-
Product Model6SE7035-7GK84-1JC2
-
Product ParametersIGD8 inverter control module
-
In stock1 unit
-
ManufacturerSiemens
-
Module TypeIGD8 inverter control
-
AC Voltage Range500 to 690 V
-
Line Frequency50/60 Hz
-
DC Link Range675 to 930 V
-
Current Ratings570 A and 1080 A
-
Converter PlatformSIMOVERT MASTERDRIVES
-
Assembly RoleInverter gate control
-
Input ConfigurationThree-phase AC
View all additional
Alternative Names
6SE7035 7GK84 1JC2
SIMOVERT MASTERDRIVES converters IGD8 inverter control module
Siemens IGD8 inverter control module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6SE7035-7GK84-1JC2 to the installed SIMOVERT MASTERDRIVES converters
Siemens 6SE7035-7GK84-1JC2 is a IGD8 inverter control module for the SIMOVERT MASTERDRIVES converters. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare dc link range (675 to 930 V), current ratings (570 A and 1080 A) and converter platform (SIMOVERT MASTERDRIVES) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 6SE7035-7GK84-1JC2
- Product class: IGD8 inverter control module
- Family: SIMOVERT MASTERDRIVES converters
The Siemens 6SE7035-7GK84-1JC2 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6SE7035-7GK84-1JC2 identity before exchange
Replace 6SE7035-7GK84-1JC2 only after matching the complete article code, IGD8 inverter control module, installed SIMOVERT MASTERDRIVES converters role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 6SE7035-7GK84-1JC2
- Product class: IGD8 inverter control module
- Family check: SIMOVERT MASTERDRIVES converters
The Siemens 6SE7035-7GK84-1JC2 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SE7035-7GK84-1JC2
- Siemens SIMOVERT MASTERDRIVES converters references reviewed
- Exact Siemens identity required before service
Documentation for Siemens 6SE7035-7GK84-1JC2 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20.0 x 15.0 x 8.0 cm
-
Shipping weight0.35 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7035-7GK84-1JC2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which identity checks confirm the exact 6SE7035-7GK84-1JC2?
Match the complete 6SE7035-7GK84-1JC2 nameplate, IGD8 inverter control module, hardware revision and documented SIMOVERT MASTERDRIVES converters position. -
What should engineering verify before connecting 6SE7035-7GK84-1JC2?
Compare the documented supply, signal or network interface, connector keying, addresses and companion equipment for 6SE7035-7GK84-1JC2. -
Can a similar family article directly replace 6SE7035-7GK84-1JC2?
No automatic substitution is established; compare the complete article code, ratings, interface set, firmware and physical arrangement. -
What records should be captured before removing 6SE7035-7GK84-1JC2?
Photograph labels, terminals, plugs, shields, earth conductors and adjacent modules, then back up the applicable configuration. -
How should 6SE7035-7GK84-1JC2 be inspected on arrival?
Check the exact label, housing or board condition, connectors, supplied accessories and transport protection before installation. -
Which commissioning checks apply after fitting 6SE7035-7GK84-1JC2?
Verify supply and wiring, restore the approved configuration, inspect diagnostics and test the affected system function safely. -
What quotation details are required for 6SE7035-7GK84-1JC2?
Provide the complete model, quantity, nameplate photographs, installed system, required interface and destination. -
Which service evidence should be retained for 6SE7035-7GK84-1JC2?
Retain the receiving inspection, connection record, configuration backup, measurements, diagnostic results and acceptance record.
READY TO VERIFY YOUR PART?
Get a 6SE7035-7GK84-1JC2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
