PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SE7090-0XX84-3DB1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7090-0XX84-3DB1 tachometer interface board
Siemens 6SE7090-0XX84-3DB1 is a tachometer interface board for SIMOVERT MASTERDRIVES. Its structure combines the documented power, signal, processing and communication interfaces for its assigned system position. During operation, it exchanges the specified process, control or diagnostic data through the configured equipment path. This supports repeatable system operation and controlled equipment response within the approved configuration.
BEFORE YOU BUY
Confirm the complete tachometer interface board
ACTUAL APPLICATIONS
Application context for 6SE7090-0XX84-3DB1
Manufacturer documentation supports these system applications when SIMOVERT MASTERDRIVES are correctly engineered and commissioned.
-
01 · AUTOMOTIVE
Assembly and Inspection Cells
Factory Automation SystemsRobot assembly cellsInspection conveyor stations -
02 · FOOD & BEVERAGE
Batching and Packaging Lines
Production Automation SystemsIngredient dosing skidsPackaging inspection stations -
03 · LOGISTICS & MATERIAL HANDLING
Sorting and Conveyor Centers
Material Handling SystemsBarcode sorting stationsConveyor control cabinets
Technical specifications for 6SE7090-0XX84-3DB1
-
Product Model6SE7090-0XX84-3DB1
-
Product Parameterstachometer interface board
-
In stock1 unit
-
ManufacturerSiemens
-
Board FunctionTachometer interface
-
Drive FamilySIMOVERT MASTERDRIVES
-
Signal InputAnalog tachometer
-
Board FormatPlug-in option board
-
External Supply24 V DC
-
Maximum External Current3 A
-
Parameter KeyP key
-
Increase KeyPlus key
-
Decrease KeyMinus key
-
MountingDrive electronics slot
View all additional
Alternative Names
6SE7090 0XX84 3DB1
SIMOVERT MASTERDRIVES tachometer interface board
Siemens tachometer interface board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6SE7090-0XX84-3DB1 to the installed SIMOVERT MASTERDRIVES
Siemens 6SE7090-0XX84-3DB1 is a tachometer interface board for the SIMOVERT MASTERDRIVES. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare board format (Plug-in option board), external supply (24 V DC) and maximum external current (3 A) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 6SE7090-0XX84-3DB1
- Product class: tachometer interface board
- Family: SIMOVERT MASTERDRIVES
The Siemens 6SE7090-0XX84-3DB1 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6SE7090-0XX84-3DB1 identity before exchange
Replace 6SE7090-0XX84-3DB1 only after matching the complete article code, tachometer interface board, installed SIMOVERT MASTERDRIVES role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 6SE7090-0XX84-3DB1
- Product class: tachometer interface board
- Family check: SIMOVERT MASTERDRIVES
The Siemens 6SE7090-0XX84-3DB1 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SE7090-0XX84-3DB1
- Siemens SIMOVERT MASTERDRIVES references reviewed
- Exact Siemens identity required before service
Documentation for Siemens 6SE7090-0XX84-3DB1 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size16 × 9.8 × 4.5 cm
-
Shipping weight0.28 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8504409999
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7090-0XX84-3DB1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which identity checks confirm the exact 6SE7090-0XX84-3DB1?
Match the complete 6SE7090-0XX84-3DB1 nameplate, tachometer interface board, hardware revision and documented SIMOVERT MASTERDRIVES position. -
What should engineering verify before connecting 6SE7090-0XX84-3DB1?
Compare the documented supply, signal or network interface, connector keying, addresses and companion equipment for 6SE7090-0XX84-3DB1. -
Can a similar family article directly replace 6SE7090-0XX84-3DB1?
No automatic substitution is established; compare the complete article code, ratings, interface set, firmware and physical arrangement. -
What records should be captured before removing 6SE7090-0XX84-3DB1?
Photograph labels, terminals, plugs, shields, earth conductors and adjacent modules, then back up the applicable configuration. -
How should 6SE7090-0XX84-3DB1 be inspected on arrival?
Check the exact label, housing or board condition, connectors, supplied accessories and transport protection before installation. -
Which commissioning checks apply after fitting 6SE7090-0XX84-3DB1?
Verify supply and wiring, restore the approved configuration, inspect diagnostics and test the affected system function safely. -
What quotation details are required for 6SE7090-0XX84-3DB1?
Provide the complete model, quantity, nameplate photographs, installed system, required interface and destination. -
Which service evidence should be retained for 6SE7090-0XX84-3DB1?
Retain the receiving inspection, connection record, configuration backup, measurements, diagnostic results and acceptance record.
READY TO VERIFY YOUR PART?
Get a 6SE7090-0XX84-3DB1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
