PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SL3100-0BE23-6AB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SL3100-0BE23-6AB0 Active interface module assembly
Siemens 6SL3100-0BE23-6AB0 is a Active interface module assembly in the SINAMICS S120 Booksize drives. It is used to connect compatible components and transfer the specified control or signal data.
Its documented configuration includes component class of Active interface module assembly, drive family of SINAMICS S120 Booksize drives, primary function of Conditions supply for Active Line Module, and power architecture of Three-phase line interface. During operation, the Active interface module assembly performs its assigned Active interface module assembly function through the documented power, signal and communication interfaces.
Its documented configuration includes component class of Active interface module assembly, drive family of SINAMICS S120 Booksize drives, primary function of Conditions supply for Active Line Module, and power architecture of Three-phase line interface. During operation, the Active interface module assembly performs its assigned Active interface module assembly function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete Active interface module assembly
ACTUAL APPLICATIONS
Where 6SL3100-0BE23-6AB0 Fits Across Major Industry Sectors
Uses span metalworking, printing and plastics, subject to verified compatibility, operating conditions and project requirements.
-
01 · METALWORKING
Industrial Metal Machining, Forming and Rolling Production
Metal machining and finishing for industrial component manufacturing operations.Metal forming and rolling within industrial material production processes. -
02 · PRINTING & PACKAGING
Commercial Printing Facilities and Industrial Packaging Production
Commercial printing and production of printed materials for businesses.Industrial product packaging and packing across manufacturing production processes. -
03 · PLASTICS PROCESSING
Plastic Product Molding and Commercial Polymer Material Processing
Injection molding of plastic products for commercial manufacturing markets.Blow molding and thermoforming for industrial plastic product manufacturing.
Technical specifications for 6SL3100-0BE23-6AB0
-
Product Model6SL3100-0BE23-6AB0
-
Product ParametersActive interface module assembly
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassActive interface module assembly
-
Drive FamilySINAMICS S120 Booksize drives
-
Primary FunctionConditions supply for Active Line Module
-
Power ArchitectureThree-phase line interface
-
Voltage Class380–480 V AC
-
Current Rating58 A input current
-
Control Supply24 V DC / 0.49 A max
-
Power Section36 kW Active Line Module
-
Mechanical DesignBooksize IP20 assembly
-
Electrical Interface50 mm² screw terminals
-
Cooling Integration0.040 m³/s internal airflow
-
Board Designation6SL3100-0BE23-6AB0 AIM
-
Service RoleLine-side harmonic interface
-
Product StatusPM300 active product
-
Commissioning CheckTest precharge and DC-link control
View all additional
Alternative Names
6SL3100 0BE23 6AB0
SINAMICS S120 Booksize drives Active interface module assembly
Siemens Active interface module assembly
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SL3100-0BE23-6AB0 to the installed SINAMICS S120 Booksize drives
Siemens 6SL3100-0BE23-6AB0 is a Active interface module assembly used in the SINAMICS S120 Booksize drives.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: 6SL3100-0BE23-6AB0
- Product class: Active interface module assembly
- Family: SINAMICS S120 Booksize drives
The Siemens 6SL3100-0BE23-6AB0 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SL3100-0BE23-6AB0 identity before exchange
Replace 6SL3100-0BE23-6AB0 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact 6SL3100-0BE23-6AB0 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens 6SL3100-0BE23-6AB0 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SL3100-0BE23-6AB0
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SL3100-0BE23-6AB0 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size15 × 38 × 27 cm
-
Shipping weight19 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85363030
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SL3100-0BE23-6AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which process depends on the 36 kW Booksize interface?
The 36 kW Booksize interface is used in the documented SINAMICS S120 Booksize drives configuration for conditions supply for active line module. -
How is a 380–480 V AC · 58 A mismatch prevented for the 36 kW Booksize interface?
For the 36 kW Booksize interface, match 380–480 V AC and 58 A input current to the installed equipment nameplate. -
What control path does the component handle for the 36 kW Booksize interface?
The 36 kW Booksize interface performs conditions supply for active line module through the three-phase line interface. -
Where should the 36 kW AIM assembly label appear for the 36 kW Booksize interface?
For the 36 kW Booksize interface, record 6SL3100-0BE23-6AB0 AIM together with the complete article and installed revision. -
How are 50 mm² screw terminals restored correctly for the 36 kW Booksize interface?
On the 36 kW Booksize interface, inspect 50 mm² screw terminals for keying, damage, contamination, routing and secure seating. -
What supply symptom can mimic failure for the 36 kW Booksize interface?
Before energizing the 36 kW Booksize interface, measure 24 v dc / 0.49 a max and confirm the documented polarity or phase condition. -
Which details are needed before ordering for the 36 kW Booksize interface?
A 36 kW Booksize interface replacement must match its electrical class, section role, companion hardware and mechanical interface. -
What controlled test follows installation for the 36 kW Booksize interface?
For the 36 kW Booksize interface, test precharge and dc-link control; then record diagnostics and the controlled functional-test result.
READY TO VERIFY YOUR PART?
Get a 6SL3100-0BE23-6AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6SL3100-0BE23-6AB0Active interface module assemblyManufacturer: SiemensView Details
-
6SL3985-6TM00-0AA0GM150 thyristor module boardManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
