PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SL3100-0BE25-5AB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SL3100-0BE25-5AB0 Active interface module assembly
Siemens 6SL3100-0BE25-5AB0 is a Active interface module assembly in the Siemens SINAMICS. It is used to connect compatible components and transfer the specified control or signal data.
Its documented configuration includes component class of Active Interface Module, drive family of SINAMICS S120 Booksize, primary function of Conditions line supply for ALM, and power architecture of Three-phase active-line interface. During operation, the Active interface module assembly performs its assigned Active interface module assembly function through the documented power, signal and communication interfaces.
Its documented configuration includes component class of Active Interface Module, drive family of SINAMICS S120 Booksize, primary function of Conditions line supply for ALM, and power architecture of Three-phase active-line interface. During operation, the Active interface module assembly performs its assigned Active interface module assembly function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete Active interface module assembly
ACTUAL APPLICATIONS
Where 6SL3100-0BE25-5AB0 Fits Across Major Industry Sectors
Uses span plastics, paper and logistics, subject to verified compatibility, operating conditions and project requirements.
-
01 · PLASTICS PROCESSING
Plastic Material Manufacturing, Extrusion and Film Production
Plastic material extrusion and processing for industrial manufacturing operations.Plastic film production and converting for manufactured plastic products. -
02 · PULP & PAPER
Paper Manufacturing, Material Processing and Paper Converting
Paper manufacturing and processing for commercial paper product markets.Paper converting and finishing within industrial paper production operations. -
03 · TRANSPORT & LOGISTICS
Rail Freight Handling and Industrial Lifting Operations
Rail freight transportation and cargo handling within logistics operations.Industrial material handling and lifting for goods movement operations.
Technical specifications for 6SL3100-0BE25-5AB0
-
Product Model6SL3100-0BE25-5AB0
-
Product ParametersActive interface module assembly
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassActive Interface Module
-
Drive FamilySINAMICS S120 Booksize
-
Primary FunctionConditions line supply for ALM
-
Power ArchitectureThree-phase active-line interface
-
Voltage Class380–480 V AC
-
Current Rating88 A input current
-
Control Supply24 V DC / 0.60 A max
-
Power Section55 kW Active Line Module
-
Mechanical DesignBooksize IP20 assembly
-
Electrical Interface50 mm² screw terminals
-
Cooling Integration0.083 m³/s internal airflow
-
Board Designation6SL3100-0BE25-5AB0 AIM
-
Service RoleLine-side harmonic interface
-
Product StatusPM300 active product
-
Commissioning CheckVerify PE, line and ALM links
View all additional
Alternative Names
6SL3100 0BE25 5AB0
SINAMICS S120 Booksize drives Active interface module assembly
Siemens Active interface module assembly
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SL3100-0BE25-5AB0 to the installed SINAMICS S120 Booksize drives
Siemens 6SL3100-0BE25-5AB0 is a Active interface module assembly used in the SINAMICS S120 Booksize drives.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: 6SL3100-0BE25-5AB0
- Product class: Active interface module assembly
- Family: SINAMICS S120 Booksize drives
The Siemens 6SL3100-0BE25-5AB0 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SL3100-0BE25-5AB0 identity before exchange
Replace 6SL3100-0BE25-5AB0 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact 6SL3100-0BE25-5AB0 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens 6SL3100-0BE25-5AB0 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SL3100-0BE25-5AB0
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SL3100-0BE25-5AB0 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20 × 38 × 27 cm
-
Shipping weight24 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85363030
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SL3100-0BE25-5AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which Active Line Module rating uses this interface module?
6SL3100-0BE25-5AB0 is intended for a 55 kW SINAMICS S120 Active Line Module arrangement. -
What mains supply is accepted at the line side?
The documented input is three-phase 380–480 V AC at 50/60 Hz. -
Why is the 88 A input-current value useful?
It supports checks of line wiring, protection and the correct Booksize interface selection. -
How much 24 V DC current can the interface require?
The specified maximum control-current requirement is 0.60 A. -
What conductor size is listed for the screw terminals?
The line-side connection accepts up to 50 mm² conductors, subject to the applicable installation rules. -
How is the internal air-cooling path maintained?
Keep the 0.083 m³/s airflow path clear and preserve the documented spacing around the Booksize assembly. -
Which enclosure classification applies to 6SL3100-0BE25-5AB0?
The module is IP20 / UL open type and therefore requires installation inside suitable protected equipment. -
What should be tested with the Active Line Module after replacement?
Check precharge, line synchronization, DC-link regulation and diagnostic status before applying the normal load.
READY TO VERIFY YOUR PART?
Get a 6SL3100-0BE25-5AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
