PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SL3210-1KE18-8UF1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SL3210-1KE18-8UF1 SINAMICS G120C compact converter
Siemens 6SL3210-1KE18-8UF1 is a SINAMICS G120C compact converter for 380 to 480 V three-phase motors. It provides 4.00 kW low-overload or 3.00 kW high-overload duty, PROFINET and EtherNet/IP communication, integrated Safe Torque Off and configurable machine-control I/O. Verify the complete article suffix, motor current, control supply, network project and safety circuit before replacement or commissioning.
BEFORE YOU BUY
Confirm the complete SINAMICS G120C compact converter
ACTUAL APPLICATIONS
Application context for 6SL3210-1KE18-8UF1
The applications below show typical industry settings, application scenarios, application areas and equipment for 6SL3210-1KE18-8UF1. Confirm the exact product configuration before use.
-
01 · WATER & WASTEWATER
Pump and blower speed control
Plant areas servedProcess-pump flow regulationAeration-blower energy control -
02 · FOOD & BEVERAGE
Conveying and packaging machinery
Production areasConveyor motor speed controlPackaging-axis drive operation -
03 · LOGISTICS & MATERIAL HANDLING
Automated conveyor and transfer lines
Application areasSortation conveyor drive controlPallet-transfer speed regulation
Technical specifications for 6SL3210-1KE18-8UF1
-
Product Model6SL3210-1KE18-8UF1
-
Product ParametersSINAMICS G120C compact converter
-
In stock1 unit
-
ManufacturerSiemens
-
Input Phases3 AC
-
Line Voltage380 to 480 V AC, +10% / -20%
-
Line Frequency47 to 63 Hz
-
Rated Power Low Overload4.00 kW / 5.00 hp
-
Rated Power High Overload3.00 kW / 4.00 hp
-
Rated Output Current LO8.80 A
-
Rated Output Current HO7.30 A
-
Maximum Output Current14.60 A
-
Pulse Frequency4 kHz
-
CommunicationPROFINET and EtherNet/IP
-
Standard Digital Inputs6 channels
-
Fail-safe Digital Inputs1 channel
-
Digital Outputs1 relay and 1 transistor
-
Analog Input1 differential input, 10-bit
-
Degree of ProtectionIP20 / UL open type
View all additional
Alternative Names
6SL3210 1KE18 8UF1
SINAMICS G120C 4 kW PROFINET drive
Siemens FSA compact frequency converter
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6SL3210-1KE18-8UF1 to the installed SINAMICS G120C compact converters
Siemens 6SL3210-1KE18-8UF1 is a SINAMICS G120C compact converter for the SINAMICS G120C compact converters. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare rated power low overload (4.00 kW / 5.00 hp), rated power high overload (3.00 kW / 4.00 hp) and rated output current lo (8.80 A) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 6SL3210-1KE18-8UF1
- Product class: SINAMICS G120C compact converter
- Family: SINAMICS G120C compact converters
The Siemens 6SL3210-1KE18-8UF1 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6SL3210-1KE18-8UF1 identity before exchange
Replace 6SL3210-1KE18-8UF1 only after matching the complete article code, SINAMICS G120C compact converter, installed SINAMICS G120C compact converters role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 6SL3210-1KE18-8UF1
- Product class: SINAMICS G120C compact converter
- Family check: SINAMICS G120C compact converters
The Siemens 6SL3210-1KE18-8UF1 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SL3210-1KE18-8UF1
- Siemens SINAMICS G120C compact converters references reviewed
- Exact Siemens identity required before service
Documentation for Siemens 6SL3210-1KE18-8UF1 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size27.0 × 22.5 × 8.5 cm
-
Shipping weight2.10 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85044095
-
OriginGreat Britain
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SL3210-1KE18-8UF1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How does engineering confirm this G120C matches the installed motor circuit?
Match 6SL3210-1KE18-8UF1 to a 380 to 480 V three-phase supply, the motor full-load current, the required 4.00 kW low-overload or 3.00 kW high-overload duty, and the existing protection and braking design. -
Which PROFINET details should maintenance save before replacing the converter?
Save the 6SL3210-1KE18-8UF1 device name, IP configuration, controller project, telegram selection, motor data, ramp times and safety settings before disconnecting the two Ethernet ports or field wiring. -
How should technicians verify the 24 V control supply and I/O wiring?
Confirm the external 24 V supply, six standard digital inputs, one fail-safe input, relay and transistor outputs, differential analog input and motor-temperature sensor wiring against the approved drawings before energising 6SL3210-1KE18-8UF1. -
What overload values must be checked during drive commissioning?
For low-overload duty, verify 150% base current for 3 seconds followed by 110% for 57 seconds; for high-overload duty, verify 200% for 3 seconds followed by 150% for 57 seconds within the documented 300-second cycle. -
How can maintenance distinguish a drive fault from a motor or cable fault?
Read the SINAMICS diagnostics, measure the three-phase input, inspect motor insulation and grounding, compare output current with the 8.80 A LO or 7.30 A HO rating, and test the motor separately before replacing 6SL3210-1KE18-8UF1. -
Which installation conditions prevent overheating in the FSA converter?
Maintain the documented airflow, keep the integrated fan path clear, respect the -10 to 40 °C operating range and 1000 m reference altitude, and install the IP20 unit inside a suitable control enclosure. -
Can another 6SL3210-1KE18 converter replace this PROFINET version directly?
Do not substitute by power rating alone. Confirm the complete 6SL3210-1KE18-8UF1 suffix, PROFINET and EtherNet/IP interface, filter version, Safe Torque Off circuit, frame size, terminal layout and saved project parameters. -
What information should a distributor include in the G120C quotation?
Quote the complete 6SL3210-1KE18-8UF1 article number, quantity, 380 to 480 V supply, required overload duty, PROFINET interface, destination and delivery date; request a nameplate photo when replacing installed equipment.
READY TO VERIFY YOUR PART?
Get a 6SL3210-1KE18-8UF1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
