PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SL3210-1PE31-8UL0
· Product image is representative; revision or series may vary. Contact us to request a specific version.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
Siemens 6SL3210-1PE31-8UL0 is a SINAMICS G120 PM240-2 power module without an integrated line filter and with a built-in braking chopper.
It is designed for a 3 AC 380 to 480 V supply with +10/-20% tolerance and an input frequency of 47 to 63 Hz.
The high-overload rating is 75 kW with 200% for 3 s, 150% for 57 s and 100% for 240 s at -20 to +50 C.
The low-overload rating is 90 kW with 150% for 3 s, 110% for 57 s and 100% for 240 s at -20 to +40 C.
The module is frame size FSF with IP20 protection and is supplied without a control unit or operator panel.
Siemens lists the product as PM300 - Active Product. Verify the motor duty, filtering, control unit, braking design, cabinet cooling and firmware V4.7 HF8 before replacement.
Technical specifications for 6SL3210-1PE31-8UL0
-
Product Model6SL3210-1PE31-8UL0
-
Spare ModelNot available
-
Product ParametersSINAMICS G120 PM240-2 power module without filter and with built-in braking chopper
-
Tariff Code85044095
-
Country of originGermany
-
Place of shipmentXiamen, China
-
Estimated Shipping Size469 x 745 x 385 mm
-
ManufacturerSiemens
-
Weight58 kg
-
Product typePower Module PM240-2
-
Drive systemSINAMICS G120
-
Line filterNot included
-
Braking chopperBuilt-in
-
Input phases3 AC
-
Input voltage range380 to 480 V +10/-20%
-
Input frequency47 to 63 Hz
-
High-overload output75 kW
-
High-overload duty200% for 3 s; 150% for 57 s; 100% for 240 s
-
High-overload ambient-20 to +50 C
-
Low-overload output90 kW
-
Low-overload duty150% for 3 s; 110% for 57 s; 100% for 240 s
-
Low-overload ambient-20 to +40 C
-
Frame sizeFSF
-
Degree of protectionIP20
-
Control unitNot included
-
Operator panelNot included
-
Approved CU firmwareV4.7 HF8
View all additional
Technical notes
Confirm the exact SINAMICS G120 PM240-2 article, unfiltered EMC design, 3 AC 380 to 480 V supply with +10/-20% tolerance, 47 to 63 Hz input, required 75 kW high-overload or 90 kW low-overload duty, motor current, external line-filter requirements, braking resistor design, FSF mechanical fit, IP20 cabinet protection, cooling, control-unit compatibility and CU firmware V4.7 HF8 before installation or replacement.
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
Product Information
Key Features
Applications
Engineering & Compatibility
Lifecycle & Replacement
Siemens 6SL3210-1PE31-8UL0 is a SINAMICS G120 PM240-2 power module.
The module has no integrated line filter and includes a braking chopper.
The input rating is 3 AC 380 to 480 V with +10/-20% tolerance at 47 to 63 Hz.
High-overload output is 75 kW and low-overload output is 90 kW.
The module is frame size FSF with IP20 protection.
It is supplied without a control unit or operator panel and is approved for control-unit firmware V4.7 HF8.
SINAMICS G120 PM240-2 power module.
No integrated line filter.
Built-in braking chopper.
3 AC 380 to 480 V input.
47 to 63 Hz input frequency.
75 kW high-overload and 90 kW low-overload ratings.
FSF frame with IP20 protection.
SINAMICS G120 variable-speed motor-drive systems.
Motor control requiring a 75 kW high-overload rating.
Motor control requiring a 90 kW low-overload rating.
Drive installations with a separately engineered line-filter solution.
Applications requiring a built-in braking chopper and verified external braking design.
Confirm that the supply is 3 AC 380 to 480 V with +10/-20% tolerance at 47 to 63 Hz.
Select the 75 kW high-overload or 90 kW low-overload duty according to the motor and load profile.
Verify the specified overload cycle and the corresponding -20 to +50 C or -20 to +40 C ambient range.
Engineer the EMC and line-filter solution because this article has no integrated filter.
Design the braking resistor and wiring for the built-in braking chopper.
Verify FSF dimensions of 708 x 305 x 357 mm and provide the required IP20 cabinet protection and cooling.
Select a compatible SINAMICS control unit and operator panel because neither is included.
Confirm control-unit firmware V4.7 HF8 and review the current Siemens documentation before commissioning.
Siemens lists 6SL3210-1PE31-8UL0 as PM300 - Active Product.
No official successor is listed for this active article.
An exact replacement must match the G120 PM240-2 type, unfiltered design, input supply, overload rating and frame.
The motor, line filter, braking resistor, cabinet cooling, control unit, firmware and project settings must be verified.
A different PM240-2 or older PM340 article is not an automatic direct substitute.
AMIKONG can assist with checking availability of the exact article and compatible spare units for the verified drive configuration.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SL3210-1PE31-8UL0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is Siemens 6SL3210-1PE31-8UL0?
It is a SINAMICS G120 PM240-2 power module in frame size FSF with IP20 protection. -
What input supply does this PM240-2 require?
It is designed for a 3 AC 380 to 480 V supply with +10/-20% tolerance at 47 to 63 Hz. -
Does the module include a line filter and braking chopper?
It has no integrated line filter and includes a built-in braking chopper. -
What are the high-overload ratings?
High overload is 75 kW with 200% for 3 s, 150% for 57 s and 100% for 240 s at -20 to +50 C. -
What are the low-overload ratings?
Low overload is 90 kW with 150% for 3 s, 110% for 57 s and 100% for 240 s at -20 to +40 C. -
Are the control unit and operator panel included?
No. Siemens states that the power module is supplied without a control unit and operator panel. -
What are the package dimensions and net weight?
The package dimensions are 469 x 745 x 385 mm and the net weight is 58.000 kg. -
What must be checked before replacement or installation?
Confirm the exact article, unfiltered EMC design, supply tolerance, overload duty, motor requirements, external filtering, braking design, cabinet cooling, FSF fit, compatible control unit and firmware V4.7 HF8.
READY TO VERIFY YOUR PART?
Get a 6SL3210-1PE31-8UL0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6SL3210-1PE31-8UL0SINAMICS G120 PM240-2 power module without filter and with built-in braking chopperManufacturer: SiemensView Details
-
-
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
