PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SL3352-6BE00-0AA1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SL3352-6BE00-0AA1 PX replacement power supply
Siemens 6SL3352-6BE00-0AA1 is a PX replacement power supply used in the SINAMICS S120 chassis drives. It supplies regulated auxiliary power to the chassis control electronics and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 24 V DC output class, Chassis-defined auxiliary load, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 24 V DC output class, Chassis-defined auxiliary load, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete PX replacement power supply
ACTUAL APPLICATIONS
Application context for 6SL3352-6BE00-0AA1
Manufacturer documentation places the Px Power Supply in practical power applications. The three cases below describe different operating tasks in which 6SL3352-6BE00-0AA1 performs its documented product-family role with the configured companion equipment.
-
01 · FOOD & BEVERAGE
Verify recipe mixing during recipe changeover
For the coordinated operation of the mixers and ingredient skids, 6SL3352-6BE00-0AA1 operates in its approved product-family role as a Px Power Supply. During recipe changeover, the system uses this function to sequence material transfers and equipment permissives, helping it preserve the verified batch state. -
02 · WATER & WASTEWATER
Verify chemical dosing with Px Power process control
Inside the metering pumps and contact tanks, 6SL3352-6BE00-0AA1 serves its documented function as a Px Power Supply. During dose-setpoint correction, the system uses this function to match reagent flow to the measured process load, helping it keep treatment chemistry inside its operating target. -
03 · AUTOMOTIVE
Regulate robotic joining during station restart
During operation of the robots, fixtures and clamp groups, 6SL3352-6BE00-0AA1 performs its assigned control role as a Px Power Supply. During station restart, the system uses this function to confirm tooling readiness before the cycle starts, helping it prevent an incomplete joining cycle.
Technical specifications for 6SL3352-6BE00-0AA1
-
Product Model6SL3352-6BE00-0AA1
-
Product ParametersPX replacement power supply
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassPX replacement power supply
-
Drive FamilySINAMICS S120 chassis drives
-
Primary FunctionSupplies regulated auxiliary power to the chassis control electronics
-
Power ArchitecturePX power-supply architecture
-
Voltage Class24 V DC output class
-
Current RatingChassis-defined auxiliary load
-
Power SectionPower supply section
-
Mechanical DesignReplaceable PX module
-
Electrical InterfaceInput, output and monitoring connectors
-
Commissioning CheckVerify rails, fan and diagnostic status
View all additional
Alternative Names
6SL3352 6BE00 0AA1
SINAMICS S120 chassis drives PX replacement power supply
Siemens PX replacement supply
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SL3352-6BE00-0AA1 to the installed SINAMICS S120 chassis drives
Siemens 6SL3352-6BE00-0AA1 is a PX replacement power supply used in the SINAMICS S120 chassis drives to supply regulated auxiliary power to the chassis control electronics. Its px power-supply architecture role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 24 V DC output class, Chassis-defined auxiliary load, the power supply section, replaceable px module and input, output and monitoring connectors. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete verify rails, fan and diagnostic status, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6SL3352-6BE00-0AA1
- Function: Supplies regulated auxiliary power to the chassis control electronics
- Family: SINAMICS S120 chassis drives
The Siemens 6SL3352-6BE00-0AA1 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SL3352-6BE00-0AA1 identity before exchange
Treat 6SL3352-6BE00-0AA1 as a configuration-specific PX replacement power supply for the SINAMICS S120 chassis drives. Match the complete Siemens article number, installed power supply section, board or module revision, mechanical design and approved replacement record before removal.
Photograph input, output and monitoring connectors, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented replaceable px module and any cooling or discharge provisions while the drive is isolated.
After installation, verify rails, fan and diagnostic status. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: 6SL3352-6BE00-0AA1
- Installed section: Power supply section
- Release check: Verify rails, fan and diagnostic status
The Siemens 6SL3352-6BE00-0AA1 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for 6SL3352-6BE00-0AA1
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SL3352-6BE00-0AA1 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size32 × 22 × 10 cm
-
Shipping weight2 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SL3352-6BE00-0AA1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What maintenance case fits 6SL3352-6BE00-0AA1 for chassis auxiliary power in SINAMICS S120 chassis drives?
Use 6SL3352-6BE00-0AA1 only for supplies regulated auxiliary power to the chassis control electronics in the documented SINAMICS S120 chassis drives. Engineering must confirm the installed power supply section, 24 V DC output class and controlled drawing before work. -
What symptoms should maintenance record before blaming 6SL3352-6BE00-0AA1 for a supply connector mapping fault?
For 6SL3352-6BE00-0AA1, review drive alarms, DC-link or supply readings, command status, input, output and monitoring connectors and the physical condition of the PX replacement supply. Compare results with a known-good channel where the site procedure permits. -
What must engineers capture before removing 6SL3352-6BE00-0AA1 from the power supply section?
Before removing 6SL3352-6BE00-0AA1, save parameters where applicable and photograph the replaceable px module, connector keys, cable labels, shield and protective-earth routes, adjacent assemblies and full nameplate. -
Which post-replacement tests release the PX replacement supply back to service?
After installation, verify rails, fan and diagnostic status. Maintenance should then review diagnostics, prove the rail diagnostic test under controlled conditions and record the final result before production release. -
Which revision evidence separates 6SL3352-6BE00-0AA1 as the correct PX replacement supply?
Match the complete 6SL3352-6BE00-0AA1 article, PX replacement supply, 24 V DC output class, Chassis-defined auxiliary load, hardware suffix and installed SINAMICS S120 chassis drives configuration. A similar appearance or shortened article number is insufficient. -
What should a distributor disclose about the condition and revision of 6SL3352-6BE00-0AA1?
The offer for 6SL3352-6BE00-0AA1 should state label revision, new or surplus condition, visible inspection result and whether connectors, memory, software, manuals or other accessories are included. Unlisted accessories are excluded. -
What stock, dispatch and packing information does a buyer need for the PX replacement supply?
For 6SL3352-6BE00-0AA1, request confirmed stock status, dispatch time, ship-from location, packed size, shipping weight and courier options. The written quotation controls the final delivery terms. -
What paperwork should procurement request with the PX replacement supply?
A 6SL3352-6BE00-0AA1 quotation should identify the supplied Data Sheet and Installation Instructions, 12-month AMIKON warranty, HS reference, origin, return conditions and any document or licence limitations.
READY TO VERIFY YOUR PART?
Get a 6SL3352-6BE00-0AA1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
