PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SL3352-1AE33-8AA1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SL3352-1AE33-8AA1 Replacement Power Block Module
Siemens 6SL3352-1AE33-8AA1 is a replacement power block for the SINAMICS drive range. It is specified for a three-phase, 380 A Motor Module with a 510–750 V DC link and is supplied as a spare component for maintaining the corresponding installed drive.
The catalog identifies painted modules and nickel-plated busbars. The power block belongs to the power conversion section of the host Motor Module; the existing Control Unit, motor data and drive configuration determine machine operation. Match the complete article number, voltage class, frame designation and mating hardware before replacement.
The catalog identifies painted modules and nickel-plated busbars. The power block belongs to the power conversion section of the host Motor Module; the existing Control Unit, motor data and drive configuration determine machine operation. Match the complete article number, voltage class, frame designation and mating hardware before replacement.
BEFORE YOU BUY
Confirm the complete replacement power block module
ACTUAL APPLICATIONS
Application context for 6SL3352-1AE33-8AA1
6SL3352-1AE33-8AA1 supports maintenance of a compatible SINAMICS Motor Module in industrial production. Its documented power block specification is 510–750 V DC and 380 A. Suitable production settings include paper manufacture, metal processing and textile production, subject to the installed drive configuration.
-
01 · PULP & PAPER
Pulp, Paper and Board Manufacturing
Paper and Board ProductionPulp Preparation and Processing -
02 · METALS
Metal Production and Rolling Processes
Steel Rolling and FinishingNonferrous Metal Strip Processing -
03 · TEXTILES
Textile Manufacturing and Fabric Processing
Synthetic Fibre and Yarn ProductionTextile Weaving and Fabric Finishing
Technical specifications for 6SL3352-1AE33-8AA1
-
Product Model6SL3352-1AE33-8AA1
-
Product ParametersReplacement Power Block Module
-
In stock6 units
-
ManufacturerSiemens
-
DC link voltage510–750 V DC
-
Motor Module current380 A
-
Motor output phases3
-
Module surface finishPainted
-
Busbar surface finishNickel-plated
-
Catalog frame designationFSG
-
Host AC voltage class480 V AC
-
RoHS compliance2011/65/EU; since 2015-04-01
View all additional
Alternative Names
6SL3352-1AE33-8AA1
SINAMICS S120 Replacement Power Block Module
S120 510–750 V DC dc link voltage
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6SL3352-1AE33-8AA1 replacement power block module
Match 6SL3352-1AE33-8AA1 to the installed SINAMICS Motor Module using its full article number, 510–750 V DC link rating and 380 A current designation. Record the existing frame and power connections before selecting the spare.
Use the corresponding Motor Module service documentation to identify the power block arrangement, busbars, control connections and cooling path. The catalog specifies painted modules and nickel-plated busbars; preserve the approved mechanical and electrical arrangement.
Carry out replacement and recommissioning under the complete drive instructions. Restore the controlled drive configuration and verify the host unit diagnostics and motor operation at an approved operating point.
Features:
- DC link voltage: 510–750 V DC
- Motor Module current: 380 A
- Motor output phases: 3
The 6SL3352-1AE33-8AA1 replacement power block module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6SL3352-1AE33-8AA1 replacement power block module
A replacement of 6SL3352-1AE33-8AA1 requires matching the entire spare-part number and the installed Motor Module. A shared current designation alone does not establish equivalence between power blocks.
Record busbar positions, cable labels, cooling connections and the installed drive configuration before removal. Compare the supplied article and coating with the original component and retain the identification record.
After the approved replacement procedure, review drive alarms and verify controlled motor response. Keep the final parameter backup and service acceptance record with the maintained machine.
Features:
- DC link voltage: 510–750 V DC
- Motor Module current: 380 A
- Motor output phases: 3
The 6SL3352-1AE33-8AA1 replacement power block module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6SL3352-1AE33-8AA1 replacement power block module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size25.5 × 18.5 × 5.8cm
-
Shipping weight1.34kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SL3352-1AE33-8AA1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which DC link does this power block require?
6SL3352-1AE33-8AA1 is specified for a 510–750 V DC link in its compatible SINAMICS Motor Module. -
Does 380 A describe a complete drive package?
No. The 380 A designation identifies the host Motor Module rating for this spare power block; the complete drive requires its other configured components. -
What conductive surface finish is specified?
The Siemens catalog specifies nickel-plated busbars for 6SL3352-1AE33-8AA1. -
How are the modules protected on the surface?
The exact catalog entry identifies painted modules. Compare this construction with the supplied spare and existing installation. -
Can the power block determine machine positioning functions?
Positioning and machine functions depend on the installed SINAMICS Control Unit and project configuration, rather than this spare power block alone. -
Why must the frame designation be compared?
The catalog short designation includes FSG. Match the installed frame and mating hardware before accepting this spare for service. -
What identification helps obtain the correct 380 A spare?
For 6SL3352-1AE33-8AA1, provide the Motor Module nameplate, the complete spare number and photographs of the power block connections with the requested quantity. -
What should procurement verify about the offered power block?
Compare the offered 6SL3352-1AE33-8AA1 label, busbar finish and physical arrangement against the installed article, and specify any required companion components in the order.
READY TO VERIFY YOUR PART?
Get a 6SL3352-1AE33-8AA1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
