PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SL3351-6TE32-6AA3
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SL3351-6TE32-6AA3 Control interface board
Siemens 6SL3351-6TE32-6AA3 is a Control interface board used in the SINAMICS S120 chassis drives. It provides replacement control for the motor power stage and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 380–480 V AC, 260 A motor-module class, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 380–480 V AC, 260 A motor-module class, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete Control interface board
ACTUAL APPLICATIONS
6SL3351-6TE32-6AA3
Control Interface Board applications
Three model-specific service scenarios for 6SL3351-6TE32-6AA3; verify the exact Siemens configuration and controlled procedure before work.
-
01 · 260 A MOTOR STAGE
Apply the
260 A motor stageUse 6SL3351-6TE32-6AA3 for provides replacement control for the motor power stage within the documented SINAMICS S120 chassis drives. Confirm the motor module, electrical class and controlled system drawing before work. -
02 · 480 V CONTROL PATH
Prepare the
480 V control pathRecord drive-cliq and power-stage plugs, adjacent assemblies, cable routing, protective earth and configuration data. Preserve the exact 260 A S120 CIB arrangement during replacement. -
03 · CIB GATE TEST
Complete the
CIB gate testCheck 260 A hardware and all gate channels. Review Siemens diagnostics and record the final 260 A S120 CIB configuration before returning the affected function to service.
Technical specifications for 6SL3351-6TE32-6AA3
-
Product Model6SL3351-6TE32-6AA3
-
Product ParametersControl interface board
-
Place of shipmentXiamen, China
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassControl interface board
-
Drive FamilySINAMICS S120 chassis drives
-
Primary FunctionProvides replacement control for the motor power stage
-
Power ArchitectureLow-voltage CIB electronics
-
Voltage Class380–480 V AC
-
Current Rating260 A motor-module class
-
Power SectionMotor Module
-
Mechanical DesignPlug-in CIB assembly
-
Electrical InterfaceDRIVE-CLiQ and power-stage plugs
-
Commissioning CheckCheck 260 A hardware and all gate channels
View all additional
Alternative Names
6SL3351 6TE32 6AA3
SINAMICS S120 chassis drives Control interface board
Siemens 260 A S120 CIB
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SL3351-6TE32-6AA3 to the installed SINAMICS S120 chassis drives
Siemens 6SL3351-6TE32-6AA3 is a Control interface board used in the SINAMICS S120 chassis drives to provide replacement control for the motor power stage. Its low-voltage cib electronics role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 380–480 V AC, 260 A motor-module class, the motor module, plug-in cib assembly and drive-cliq and power-stage plugs. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete check 260 a hardware and all gate channels, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6SL3351-6TE32-6AA3
- Function: Provides replacement control for the motor power stage
- Family: SINAMICS S120 chassis drives
The Siemens 6SL3351-6TE32-6AA3 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SL3351-6TE32-6AA3 identity before exchange
Treat 6SL3351-6TE32-6AA3 as a configuration-specific Control interface board for the SINAMICS S120 chassis drives. Match the complete Siemens article number, installed motor module, board or module revision, mechanical design and approved replacement record before removal.
Photograph drive-cliq and power-stage plugs, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented plug-in cib assembly and any cooling or discharge provisions while the drive is isolated.
After installation, check 260 a hardware and all gate channels. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: 6SL3351-6TE32-6AA3
- Installed section: Motor Module
- Release check: Check 260 A hardware and all gate channels
The Siemens 6SL3351-6TE32-6AA3 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for 6SL3351-6TE32-6AA3
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SL3351-6TE32-6AA3 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size25.5 × 18.5 × 4 cm
-
Shipping weight0.38 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SL3351-6TE32-6AA3
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which documented task requires the 260 A S120 CIB?
6SL3351-6TE32-6AA3 is applied to provides replacement control for the motor power stage in the SINAMICS S120 chassis drives; verify the installed motor module first. -
How is the 380–480 V AC class checked for the 260 A S120 CIB?
Compare the complete 6SL3351-6TE32-6AA3 identifier, drive nameplate, DC-link or supply data and the applicable Siemens manual. -
What distinguishes the 260 A motor stage configuration?
Match 260 A motor-module class, plug-in cib assembly and the controlled hardware arrangement rather than appearance alone. -
Which records preserve the 480 V control path setup?
Photograph drive-cliq and power-stage plugs, connector keys, cable labels, grounding, adjacent parts and revision before removing 6SL3351-6TE32-6AA3. -
What isolation step protects the 260 A S120 CIB?
Apply site lockout, wait the Siemens discharge time, prove absence of voltage and use ESD controls before handling 6SL3351-6TE32-6AA3. -
What arrival inspection applies to 260 A motor stage?
Check the 6SL3351-6TE32-6AA3 label, suffix, connectors, coating, mechanical damage, contamination and protective packing before installation. -
How is the CIB gate test result accepted?
Check 260 A hardware and all gate channels. Record diagnostics and the controlled functional result before release. -
What quotation details identify the 260 A S120 CIB?
Send the full 6SL3351-6TE32-6AA3 label, installed motor module, interface photos, quantity, fault symptoms and destination.
READY TO VERIFY YOUR PART?
Get a 6SL3351-6TE32-6AA3 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
