PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SL3352-6TG38-8AA3
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SL3352-6TG38-8AA3 Control interface board
Siemens 6SL3352-6TG38-8AA3 is a Control interface board used in the SINAMICS S120 chassis drives. It interfaces control electronics with the motor module and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 500–690 V AC class, 910 A motor-module class, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 500–690 V AC class, 910 A motor-module class, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete Control interface board
ACTUAL APPLICATIONS
Where 6SL3352-6TG38-8AA3 Fits Across Major Industry Sectors
Uses span textiles, wood and beverages, subject to verified compatibility, operating conditions and project requirements.
-
01 · TEXTILE MANUFACTURING
Synthetic Fiber Manufacturing and Industrial Tire Cord Production
Manmade fiber production and processing within the textile industry.Tire cord manufacturing for industrial textile and reinforcement products. -
02 · WOOD PROCESSING
Solid Wood Processing and Industrial Panel Manufacturing
Solid wood processing and machining for commercial timber production.Wood panel processing and finishing for manufactured wood products. -
03 · FOOD & BEVERAGE
Commercial Beverage Brewing, Bottling and Product Packaging
Commercial beverage brewing and processing for consumer drinks production.Beverage bottling and packaging for retail and wholesale distribution.
Technical specifications for 6SL3352-6TG38-8AA3
-
Product Model6SL3352-6TG38-8AA3
-
Product ParametersControl interface board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassControl interface board
-
Drive FamilySINAMICS S120 chassis drives
-
Primary FunctionInterfaces control electronics with the motor module
-
Power ArchitectureHigh-voltage motor-module control
-
Voltage Class500–690 V AC class
-
Current Rating910 A motor-module class
-
Power SectionMotor Module
-
Mechanical DesignPlug-in CIB assembly
-
Electrical InterfaceDRIVE-CLiQ and internal power-stage connectors
-
Commissioning CheckMatch the 6TG38 variant and firing connections
View all additional
Alternative Names
6SL3352 6TG38 8AA3
SINAMICS S120 chassis drives Control interface board
Siemens Control interface board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SL3352-6TG38-8AA3 to the installed SINAMICS S120 chassis drives
Siemens 6SL3352-6TG38-8AA3 is a Control interface board used in the SINAMICS S120 chassis drives to interface control electronics with the motor module. Its high-voltage motor-module control role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 500–690 V AC class, 910 A motor-module class, the motor module, plug-in cib assembly and drive-cliq and internal power-stage connectors. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete match the 6tg38 variant and firing connections, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6SL3352-6TG38-8AA3
- Function: Interfaces control electronics with the motor module
- Family: SINAMICS S120 chassis drives
The Siemens 6SL3352-6TG38-8AA3 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SL3352-6TG38-8AA3 identity before exchange
Treat 6SL3352-6TG38-8AA3 as a configuration-specific Control interface board for the SINAMICS S120 chassis drives. Match the complete Siemens article number, installed motor module, board or module revision, mechanical design and approved replacement record before removal.
Photograph drive-cliq and internal power-stage connectors, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented plug-in cib assembly and any cooling or discharge provisions while the drive is isolated.
After installation, match the 6tg38 variant and firing connections. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: 6SL3352-6TG38-8AA3
- Installed section: Motor Module
- Release check: Match the 6TG38 variant and firing connections
The Siemens 6SL3352-6TG38-8AA3 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for 6SL3352-6TG38-8AA3
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SL3352-6TG38-8AA3 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size25.5 × 18.5 × 5.8 cm
-
Shipping weight1.34 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SL3352-6TG38-8AA3
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What operating role does the 910 A high-voltage CIB perform?
In 6SL3352-6TG38-8AA3, the documented role is to interfaces control electronics with the motor module within the SINAMICS S120 chassis drives; confirm the complete nameplate and motor module before ordering. -
Does the 910 A high-voltage CIB match the documented voltage requirement?
For 6SL3352-6TG38-8AA3, compare 500–690 V AC class with the converter nameplate, power architecture and controlled Siemens documentation. -
Which drive-cliq and internal power-stage connectors details identify the 910 A high-voltage CIB?
Before removing 6SL3352-6TG38-8AA3, capture connector keys, adjacent assemblies, cable routing, grounding points and the board revision. -
How is the 910 A motor-module class rating of the 910 A high-voltage CIB verified?
Use the installed converter rating and Siemens documentation; visual similarity to another board is insufficient for 6SL3352-6TG38-8AA3. -
What isolation procedure applies to the 910 A high-voltage CIB power architecture?
Isolate every energy source, observe the Siemens discharge time, prove absence of voltage and apply the site lockout procedure before handling 6SL3352-6TG38-8AA3. -
What should be inspected on the 910 A high-voltage CIB at receipt?
Inspect the 6SL3352-6TG38-8AA3 label, coating, connectors, bent pins, contamination, transport damage and supplied protective packing. -
Which commissioning result releases the 910 A high-voltage CIB to service?
For 6SL3352-6TG38-8AA3: Match the 6TG38 variant and firing connections. Also record insulation checks, drive diagnostics, functional results and the final hardware revision before release. -
Which site records confirm the 910 A high-voltage CIB configuration?
Send the 6SL3352-6TG38-8AA3 nameplate, installed converter type, motor module photos, quantity, fault symptoms and delivery destination.
READY TO VERIFY YOUR PART?
Get a 6SL3352-6TG38-8AA3 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
