PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- A5E00158598
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A5E00158598 CUCP-02 control card
Siemens A5E00158598 is a CUCP-02 control card in the SINAMICS converter repair parts. It is used to perform the documented CUCP-02 control card function in the installed automation equipment.
Its documented configuration includes component class of CUCP-02 control card, drive family of SINAMICS converter repair parts, primary function of Hosts CUCP-02 control and interface functions, and power architecture of Digital converter electronics. During operation, the CUCP-02 control card performs its assigned CUCP-02 control card function through the documented power, signal and communication interfaces.
Its documented configuration includes component class of CUCP-02 control card, drive family of SINAMICS converter repair parts, primary function of Hosts CUCP-02 control and interface functions, and power architecture of Digital converter electronics. During operation, the CUCP-02 control card performs its assigned CUCP-02 control card function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete CUCP-02 control card
ACTUAL APPLICATIONS
Where A5E00158598 Fits Across Major Industry Sectors
Uses span cement, power and recycling, subject to verified compatibility, operating conditions and project requirements.
-
01 · CEMENT & BUILDING MATERIALS
Cement Manufacturing, Lime Production and Mineral Processing
Cement manufacturing and mineral processing for construction material production.Industrial lime production and preparation for building material markets. -
02 · POWER GENERATION
Electricity Generation and Industrial Heat Supply Operations
Electricity generation for industrial production and regional utility supply.Combined heat and power production for industrial energy demand. -
03 · RECYCLING & RESOURCE RECOVERY
Plastic Material Recovery and Commercial Packaging Reuse
Recovery and processing of plastic waste for material reuse.Packaging refurbishment and reuse within circular material supply chains.
Technical specifications for A5E00158598
-
Product ModelA5E00158598
-
Product ParametersCUCP-02 control card
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassCUCP-02 control card
-
Drive FamilySINAMICS converter repair parts
-
Primary FunctionHosts CUCP-02 control and interface functions
-
Power ArchitectureDigital converter electronics
-
Voltage ClassInstalled drive class
-
Current RatingSignal-level channel load
-
Control Supply24 V DC control class
-
Power SectionConverter processor section
-
Mechanical DesignPlug-in service assembly
-
Electrical InterfaceCUCP-02 internal connectors
-
Cooling IntegrationCabinet cooling arrangement
-
Board DesignationA5E00158598 assembly
-
Service RoleSiemens service component
-
Product StatusVerify installed revision
-
Commissioning CheckRun diagnostics and functional test
View all additional
Alternative Names
A5E00158598
SINAMICS converter repair parts CUCP-02 control card
Siemens CUCP-02 control card
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match A5E00158598 to the installed SINAMICS converter repair parts
Siemens A5E00158598 is a CUCP-02 control card used in the SINAMICS converter repair parts to host CUCP-02 control and interface functions. Its digital converter electronics architecture must match the documented drive configuration, controlled hardware arrangement and assigned converter processor section.
Before integration, confirm the installed drive class, signal-level channel load and 24 v dc control class. Compare the complete article, plug-in service assembly and cucp-02 internal connectors with the installed equipment, cable schedule and the technical data recorded in the product PDF.
Maintain the documented cabinet cooling arrangement, isolate all hazardous energy and apply ESD protection before handling the component. Complete the specified action to run diagnostics and functional test, then review Siemens diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: A5E00158598
- Operating role: Hosts CUCP-02 control and interface functions
- Connection class: CUCP-02 internal connectors
The Siemens A5E00158598 requires documented system integration for its converter processor section, with the final run diagnostics and functional test result recorded before energising the drive.
REPLACEMENT CONTROL
Verify the complete A5E00158598 configuration before exchange
Treat A5E00158598 as a configuration-specific CUCP-02 control card for the SINAMICS converter repair parts. Match the complete Siemens article identity, A5E00158598 assembly, installed hardware revision, siemens service component and documented converter processor section before removing the original component.
Photograph the plug-in service assembly, cucp-02 internal connectors, cable labels, shielding, protective-earth points and adjacent assemblies. Record the installed drive class, signal-level channel load and 24 v dc control class so the replacement can be checked against the controlled drive documentation.
After installation, run diagnostics and functional test. Restore only the approved project data and interface assignments, review power-stage or controller diagnostics, test the control or power path associated with hosts cucp-02 control and interface functions at a controlled operating point and retain the measured results in the maintenance record.
Features:
- Article and board: A5E00158598 assembly
- Interface record: CUCP-02 internal connectors
- Release test: Run diagnostics and functional test
The Siemens A5E00158598 requires documented replacement verification for its converter processor section, with the final run diagnostics and functional test result recorded before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for A5E00158598
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens A5E00158598 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size18 × 7.8 × 6.5 cm
-
Shipping weight0.22 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about A5E00158598
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is distinctive about the CUCP-02 control card?
The CUCP-02 control card is used in the documented SINAMICS converter repair parts configuration for hosts cucp-02 control and interface functions. -
Which installation matches Installed drive class for the CUCP-02 control card?
For the CUCP-02 control card, match Installed drive class and Signal-level channel load to the installed equipment nameplate. -
How does the module hosts cucp-02 control and interface functions for the CUCP-02 control card?
The CUCP-02 control card performs hosts cucp-02 control and interface functions through the digital converter electronics. -
What record is needed for CUCP-02 card identity for the CUCP-02 control card?
For the CUCP-02 control card, record A5E00158598 assembly together with the complete article and installed revision. -
Which connection risk affects cucp-02 internal connectors for the CUCP-02 control card?
On the CUCP-02 control card, inspect cucp-02 internal connectors for keying, damage, contamination, routing and secure seating. -
How is 24 v dc control class checked under load for the CUCP-02 control card?
Before energizing the CUCP-02 control card, measure 24 v dc control class and confirm the documented polarity or phase condition. -
What companion hardware must agree for the CUCP-02 control card?
A CUCP-02 control card replacement must match its electrical class, section role, companion hardware and mechanical interface. -
How is the repaired section validated for the CUCP-02 control card?
For the CUCP-02 control card, run diagnostics and functional test; then record diagnostics and the controlled functional-test result.
READY TO VERIFY YOUR PART?
Get a A5E00158598 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
