PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- A5E00314745
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A5E00314745 BLM power control module
Siemens A5E00314745 is a BLM power control module used in the SINAMICS Basic Line Modules. It controls line-side rectification and dc-link charging and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 380–480 V AC class, Module-defined input current, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 380–480 V AC class, Module-defined input current, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete BLM power control module
ACTUAL APPLICATIONS
Where A5E00314745 Fits Across Major Industry Sectors
Uses span metalworking, plastics and recycling, subject to verified compatibility, operating conditions and project requirements.
-
01 · METALS & METALWORKING
Industrial Metal Processing and Commercial Wire Manufacturing
Metal processing and rolling for industrial materials manufacturing operations.Wire and cable production within the metal processing industry. -
02 · PLASTICS & RUBBER
Plastic Product Molding and Commercial Polymer Material Processing
Injection molding of plastic products for commercial manufacturing markets.Blow molding and thermoforming for industrial plastic product manufacturing. -
03 · RECYCLING & RESOURCE RECOVERY
Plastic Material Recovery and Commercial Packaging Reuse
Recovery and processing of plastic waste for material reuse.Packaging refurbishment and reuse within circular material supply chains.
Technical specifications for A5E00314745
-
Product ModelA5E00314745
-
Product ParametersBLM power control module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassBLM power control module
-
Drive FamilySINAMICS Basic Line Modules
-
Primary FunctionControls line-side rectification and DC-link charging
-
Power ArchitectureBLM line-side electronics
-
Voltage Class380–480 V AC class
-
Current RatingModule-defined input current
-
Power SectionBasic Line Module
-
Mechanical DesignPower-control board assembly
-
Electrical InterfacePrecharge, firing and DC-link feedback
-
Commissioning CheckTest precharge and regulated DC link
View all additional
Alternative Names
A5E00314745
SINAMICS Basic Line Modules BLM power control module
Siemens BLM control module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match A5E00314745 to the installed SINAMICS Basic Line Modules
Siemens A5E00314745 is a BLM power control module used in the SINAMICS Basic Line Modules to control line-side rectification and DC-link charging. Its blm line-side electronics role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 380–480 V AC class, Module-defined input current, the basic line module, power-control board assembly and precharge, firing and dc-link feedback. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete test precharge and regulated dc link, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: A5E00314745
- Function: Controls line-side rectification and DC-link charging
- Family: SINAMICS Basic Line Modules
The Siemens A5E00314745 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete A5E00314745 identity before exchange
Treat A5E00314745 as a configuration-specific BLM power control module for the SINAMICS Basic Line Modules. Match the complete Siemens article number, installed basic line module, board or module revision, mechanical design and approved replacement record before removal.
Photograph precharge, firing and dc-link feedback, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented power-control board assembly and any cooling or discharge provisions while the drive is isolated.
After installation, test precharge and regulated dc link. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: A5E00314745
- Installed section: Basic Line Module
- Release check: Test precharge and regulated DC link
The Siemens A5E00314745 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for A5E00314745
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens A5E00314745 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size28 × 18 × 4 cm
-
Shipping weight0.45 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about A5E00314745
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Where is the line-side rectification function used?
A5E00314745 performs controls line-side rectification and dc-link charging in the documented SINAMICS Basic Line Modules; first confirm the installed basic line module. -
Which electrical identity defines the BLM control module?
Compare A5E00314745, 380–480 V AC class, Module-defined input current and the installed drive nameplate with Siemens documentation. -
What must match before DC-link precharge work begins?
Confirm the power-control board assembly, connector keys, controlled hardware position and complete A5E00314745 suffix. -
Which connections belong to the BLM control module?
Record precharge, firing and dc-link feedback, cable labels, grounding, adjacent assemblies and board orientation before removal. -
How should the line-side rectification assembly be isolated?
Apply site lockout, wait the specified discharge time, prove absence of voltage and use ESD controls before handling A5E00314745. -
What receiving inspection applies to A5E00314745?
Check the article label, suffix, connectors, coating, mechanical condition, contamination and protective packing. -
Which result completes the BLM feedback test?
Test precharge and regulated DC link. Record diagnostics and the controlled functional test before release. -
What details are needed to quote the BLM control module?
Send the full A5E00314745 label, installed basic line module, interface photos, quantity, fault symptoms and destination.
READY TO VERIFY YOUR PART?
Get a A5E00314745 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
