PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- A5E36717813
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A5E36717813 IGD1 trigger driver board
Siemens A5E36717813 is a IGD1 trigger driver board in the Siemens SINAMICS. It is used to control the connected motor or drive function within the configured machine.
Its documented configuration includes component class of IGD1 trigger board, drive family of SINAMICS G120, primary function of Triggers 260 A power semiconductors, and power architecture of WLX_317425 gate-drive stage. During operation, the IGD1 trigger driver board processes the configured drive commands and regulates the connected motor or power section.
Its documented configuration includes component class of IGD1 trigger board, drive family of SINAMICS G120, primary function of Triggers 260 A power semiconductors, and power architecture of WLX_317425 gate-drive stage. During operation, the IGD1 trigger driver board processes the configured drive commands and regulates the connected motor or power section.
BEFORE YOU BUY
Confirm the complete IGD1 trigger driver board
ACTUAL APPLICATIONS
Where A5E36717813 Fits Across Major Industry Sectors
Uses span mining, wood and logistics, subject to verified compatibility, operating conditions and project requirements.
-
01 · MINING & MINERALS
Mineral Resource Extraction and Industrial Raw Material Processing
Mineral resource extraction for industrial production and material supply.Mineral processing and preparation for downstream industrial manufacturing operations. -
02 · WOOD PROCESSING
Solid Wood Processing and Industrial Panel Manufacturing
Solid wood processing and machining for commercial timber production.Wood panel processing and finishing for manufactured wood products. -
03 · TRANSPORT & LOGISTICS
Warehouse Operations, Goods Distribution and Industrial Logistics
Warehouse storage and order fulfillment for industrial distribution operations.Internal material flow and goods movement within distribution facilities.
Technical specifications for A5E36717813
-
Product ModelA5E36717813
-
Product ParametersIGD1 trigger driver board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassIGD1 trigger board
-
Drive FamilySINAMICS G120
-
Primary FunctionTriggers 260 A power semiconductors
-
Power ArchitectureWLX_317425 gate-drive stage
-
Voltage Class480 V AC / 650 V DC
-
Current Rating260 A continuous class
-
Control SupplyIsolated logic-side supply
-
Power SectionInverter trigger section
-
Mechanical DesignTIM board assembly
-
Electrical InterfaceInternal gate and feedback plugs
-
Cooling IntegrationMounted on cooled power block
-
Board DesignationA5E36717813 WLX_317425
-
Service RoleG120 power repair component
-
Product StatusPM300 active spare family
-
Commissioning CheckConfirm 260 A TIM marking
View all additional
Alternative Names
A5E36717813
SINAMICS G120 repair parts IGD1 trigger driver board
Siemens IGD1 trigger driver board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match A5E36717813 to the installed SINAMICS G120 repair parts
Siemens A5E36717813 is a IGD1 trigger driver board used in the SINAMICS G120 repair parts.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: A5E36717813
- Product class: IGD1 trigger driver board
- Family: SINAMICS G120 repair parts
The Siemens A5E36717813 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete A5E36717813 identity before exchange
Replace A5E36717813 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact A5E36717813 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens A5E36717813 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for A5E36717813
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens A5E36717813 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size25.5 × 18.5 × 5.8 cm
-
Shipping weight0.38 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about A5E36717813
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does the WLX_317425 designation identify?
It identifies the repair-part configuration of the A5E36717813 IGD1 trigger board. -
Which current class belongs to this trigger board?
The associated TIM power stage is rated at 260 A. -
What voltage environment is documented for A5E36717813?
It is identified for a 480 V AC / 650 V DC SINAMICS power section. -
How does an IGD1 trigger board control the inverter?
It converts control commands into isolated gate signals for the connected power semiconductors. -
What should be inspected on a removed 260 A TIM assembly?
Check gate leads, thermal contact, mounting pressure, connector condition and signs of semiconductor damage. -
Can another 260 A board be used solely because the rating matches?
No. The WLX code, IGD generation, voltage class and mechanical interface must also match. -
Why is the cooling base checked during board service?
Poor thermal contact can overheat the power devices and cause another trigger-board failure. -
How is correct firing confirmed after installation?
Verify gate-channel response and diagnostics before completing a controlled SINAMICS G120 motor test.
READY TO VERIFY YOUR PART?
Get a A5E36717813 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
-
-
-
ICB12L50F02NOM1PROX SENSOR IND. M12 PLUG 50MM NPN NO FLUSHManufacturer: Carlo GavazziView Details
-
-
-
-
-
-
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
