PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- A5F00118608-006
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A5F00118608-006 DC speed supply board
Siemens A5F00118608-006 is a DC speed supply board in the SINAMICS converter repair parts. It is used to perform the documented DC speed supply board function in the installed automation equipment.
Its documented configuration includes component class of DC speed supply board, drive family of SINAMICS converter repair parts, primary function of Generates regulated control voltages, and power architecture of Multi-output control power supply. During operation, the DC speed supply board performs its assigned DC speed supply board function through the documented power, signal and communication interfaces.
Its documented configuration includes component class of DC speed supply board, drive family of SINAMICS converter repair parts, primary function of Generates regulated control voltages, and power architecture of Multi-output control power supply. During operation, the DC speed supply board performs its assigned DC speed supply board function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete DC speed supply board
ACTUAL APPLICATIONS
Where A5F00118608-006 Fits Across Major Industry Sectors
Uses span printing, oil and gas and paper, subject to verified compatibility, operating conditions and project requirements.
-
01 · PRINTING & PACKAGING
Commercial Printing Facilities and Industrial Packaging Production
Commercial printing and production of printed materials for businesses.Industrial product packaging and packing across manufacturing production processes. -
02 · OIL & GAS
Upstream Oil Production and Natural Gas Distribution
Oilfield production and gathering operations within upstream energy industries.Natural gas transmission and distribution across regional supply networks. -
03 · PULP & PAPER
Pulp Manufacturing and Commercial Packaging Paperboard Production
Pulp manufacturing and fiber preparation for commercial papermaking operations.Paperboard production and finishing for commercial packaging material supply.
Technical specifications for A5F00118608-006
-
Product ModelA5F00118608-006
-
Product ParametersDC speed supply board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassDC speed supply board
-
Drive FamilySINAMICS converter repair parts
-
Primary FunctionGenerates regulated control voltages
-
Power ArchitectureMulti-output control power supply
-
Voltage Class110–230 V AC input
-
Current Rating700 mA on +15 V rail
-
Control Supply±15 V and +24 V DC
-
Power SectionSpeed-control electronics section
-
Mechanical DesignCompact PSU circuit board
-
Electrical InterfaceRegulated output connectors
-
Cooling IntegrationNatural cabinet cooling
-
Board DesignationA5F00118608-006 PSU
-
Service RoleDC speed-control spare
-
Product StatusSiemens repair component
-
Commissioning CheckMeasure ripple below 50 mVpp
View all additional
Alternative Names
A5F00118608 006
SINAMICS converter repair parts DC speed supply board
Siemens DC speed supply board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match A5F00118608-006 to the installed SINAMICS converter repair parts
Siemens A5F00118608-006 is a DC speed supply board used in the SINAMICS converter repair parts.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: A5F00118608-006
- Product class: DC speed supply board
- Family: SINAMICS converter repair parts
The Siemens A5F00118608-006 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete A5F00118608-006 identity before exchange
Replace A5F00118608-006 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact A5F00118608-006 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens A5F00118608-006 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for A5F00118608-006
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens A5F00118608-006 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size27.7 × 15 × 1.8 cm
-
Shipping weight0.2 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about A5F00118608-006
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Where is the low-ripple speed-control PSU used?
The low-ripple speed-control PSU is used in the documented SINAMICS converter repair parts configuration for generates regulated control voltages. -
Why does 110–230 V AC input matter for the low-ripple speed-control PSU?
For the low-ripple speed-control PSU, match 110–230 V AC input and 700 mA on +15 V rail to the installed equipment nameplate. -
Which job is performed by the low-ripple speed-control PSU?
The low-ripple speed-control PSU performs generates regulated control voltages through the multi-output control power supply. -
How is the A5F118608 PSU identified for the low-ripple speed-control PSU?
For the low-ripple speed-control PSU, record A5F00118608-006 PSU together with the complete article and installed revision. -
What should be inspected at regulated output connectors for the low-ripple speed-control PSU?
On the low-ripple speed-control PSU, inspect regulated output connectors for keying, damage, contamination, routing and secure seating. -
Which supply check protects the low-ripple speed-control PSU?
Before energizing the low-ripple speed-control PSU, measure ±15 v and +24 v dc and confirm the documented polarity or phase condition. -
Can a similar board replace the low-ripple speed-control PSU?
A low-ripple speed-control PSU replacement must match its electrical class, section role, companion hardware and mechanical interface. -
What test releases the low-ripple speed-control PSU to service?
For the low-ripple speed-control PSU, measure ripple below 50 mvpp; then record diagnostics and the controlled functional-test result.
READY TO VERIFY YOUR PART?
Get a A5F00118608-006 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
