PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- C98043-A7117-L1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
C98043-A7117-L1 converter voltage measurement board
Siemens C98043-A7117-L1 is a converter voltage measurement board for the SINAMICS drive systems. It is used to measure converter voltage feedback. Confirm the complete article identity, electrical limits, interfaces, companion hardware and controlled commissioning procedure before ordering.
BEFORE YOU BUY
Confirm the complete converter voltage measurement board
ACTUAL APPLICATIONS
Application context for C98043-A7117-L1
Manufacturer documentation places the Converter Volta Measurement Board in practical drive applications. The three cases below describe different operating tasks in which C98043-A7117-L1 performs its documented product-family role with the configured companion equipment.
-
01 · WATER & WASTEWATER
Align intake-pump staging with Converter Volta
Inside the intake pumps, wet-well levels and common headers, C98043-A7117-L1 performs its assigned control role as a Converter Volta Measurement Board. During wet-well rise, the system uses this function to bring the next pump into the required speed range, helping it control level without a sudden hydraulic step. -
02 · MINING & METALS
Align bulk conveying with Converter Volta process control
During operation of the feeders, belts and transfer chutes, C98043-A7117-L1 serves its documented function as a Converter Volta Measurement Board. During material surge, the system uses this function to adapt equipment demand to material flow, helping it reduce spillage and belt overload. -
03 · PULP & PAPER
Stabilize dryer-section control with Converter Volta
For the coordinated operation of the steam groups and dryer drives, C98043-A7117-L1 handles its designated signal or control duty as a Converter Volta Measurement Board. During moisture correction, the system uses this function to align thermal and drive response with the running sheet, helping it support the target moisture profile.
Technical specifications for C98043-A7117-L1
-
Product ModelC98043-A7117-L1
-
Product Parametersconverter voltage measurement board
-
In stock1 unit
-
ManufacturerSiemens
-
Component Classconverter voltage measurement board
-
Drive FamilySINAMICS drive systems
-
Primary FunctionMeasures converter voltage feedback
-
Power ArchitectureC98043-A7117-L1 industrial architecture
-
Voltage ClassInstalled equipment voltage class
-
Current RatingModel-specific channel current
-
Control Supply24 V DC control class
-
Power SectionSINAMICS drive systems service section
-
Mechanical DesignC98043-A7117-L1 service assembly
-
Electrical InterfaceCM voltage sensing terminals
-
Cooling IntegrationSINAMICS drive systems cooling practice
-
Board DesignationC98043-A7117-L1 exact designation
-
Service RoleC98043-A7117-L1 maintenance role
-
Product StatusC98043-A7117-L1 identity verification
-
Commissioning CheckValidate C98043-A7117-L1 diagnostics and function
View all additional
Alternative Names
C98043 A7117 L1
SINAMICS drive systems converter voltage measurement board
Siemens converter voltage measurement board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match C98043-A7117-L1 to the installed SINAMICS drive systems
Siemens C98043-A7117-L1 is a converter voltage measurement board used in the SINAMICS drive systems. Use C98043-A7117-L1 to measure converter voltage feedback within the documented SINAMICS drive systems. Confirm its electrical class, installed position and controlled equipment drawings before work.
Record connector keying, cable labels, shielding, protective earth and adjacent assemblies. Preserve the documented interface and mechanical arrangement during exchange. Confirm installed equipment voltage class, model-specific channel current, the exact mechanical position and the approved system configuration before connection.
After installation, run the applicable diagnostics, verify the connected equipment response and record the final acceptance results before returning the system to service. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: C98043-A7117-L1
- Product class: converter voltage measurement board
- Family: SINAMICS drive systems
The Siemens C98043-A7117-L1 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete C98043-A7117-L1 identity before exchange
Replace C98043-A7117-L1 only after matching the full article identity, converter voltage measurement board, installed sinamics drive systems service section and documented system role. A similar family name or physical outline does not establish interchangeability.
Before removal, photograph the product label, mounting position, cm voltage sensing terminals, cable routing, shields, earth connections and adjacent assemblies. Preserve the approved configuration or parameter backup for recovery.
After installation, restore all controlled settings and complete validate c98043-a7117-l1 diagnostics and function. Review status indications and diagnostics, test the affected function at a safe operating point, and record the final maintenance acceptance evidence.
Features:
- Exact identity: C98043-A7117-L1
- Connection: CM voltage sensing terminals
- Test: Validate C98043-A7117-L1 diagnostics and function
The Siemens C98043-A7117-L1 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for C98043-A7117-L1
- Installation checks matched to SINAMICS drive systems
- Exact Siemens identity required before service
Documentation for Siemens C98043-A7117-L1 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm before dispatch
-
Shipping weight0.131 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginRomania
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about C98043-A7117-L1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What electrical check is required before connecting C98043-A7117-L1?
Measure and confirm Installed equipment voltage class [C98043-A7117-L1 P05], Model-specific channel current [C98043-A7117-L1 P06] and 24 V DC control class [C98043-A7117-L1 P07]; also verify polarity, phase order, isolation and protective earth where applicable. -
Can a visually similar component directly replace C98043-A7117-L1?
For C98043-A7117-L1, no automatic interchangeability should be assumed. Match the full identity, electrical class, installed section, interfaces and documented revision. -
Which connections should technicians record before removing C98043-A7117-L1?
Photograph CM voltage sensing terminals [C98043-A7117-L1 P10], cable labels, shields, grounds, adjacent modules and the original routing before disconnecting the installed unit. -
What information does a distributor need to quote C98043-A7117-L1 accurately?
For C98043-A7117-L1, provide the exact model, manufacturer, equipment family, quantity, destination, nameplate photographs and requested document scope. -
How should C98043-A7117-L1 be commissioned after replacement?
For C98043-A7117-L1, restore the controlled configuration, check diagnostics and status indications, then test the affected signal, motor, network or power function at a safe operating point. -
What maintenance evidence should be retained for C98043-A7117-L1?
For C98043-A7117-L1, keep the incoming inspection, original connection record, parameter backup, measured results, diagnostic report and final service approval with the equipment history. -
Which installed-system details should engineering confirm before ordering C98043-A7117-L1?
Confirm SINAMICS drive systems, the exact article marking, Installed equipment voltage class [C98043-A7117-L1 P05], CM voltage sensing terminals [C98043-A7117-L1 P10], companion hardware and the saved configuration. -
How should maintenance identify C98043-A7117-L1 during receiving inspection?
Check the full model label, C98043-A7117-L1 exact designation [C98043-A7117-L1 P12], connector keying, board revision, mechanical condition and shipping damage before installation.
READY TO VERIFY YOUR PART?
Get a C98043-A7117-L1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
