PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SITOP
- 6EP1322-5BA10
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6EP1322-5BA10 SITOP PSU100C 12 V DC 6.5 A power supply
Siemens 6EP1322-5BA10 is a SITOP PSU100C compact regulated power supply rated at 12 V DC and 6.5 A. Its wide input accepts single-phase AC from 85 to 264 V or DC from 110 to 300 V.
The DIN-rail supply provides approximately 20 ms of mains buffering and defined input-current and inrush characteristics. Protective device, conductor size, output load and cabinet ventilation must meet the documented conditions.
The DIN-rail supply provides approximately 20 ms of mains buffering and defined input-current and inrush characteristics. Protective device, conductor size, output load and cabinet ventilation must meet the documented conditions.
BEFORE YOU BUY
Confirm the complete SITOP PSU100C 12 V DC 6.5 A power supply
ACTUAL APPLICATIONS
Application fields for 6EP1322-5BA10
Three broad application areas relevant to 6EP1322-5BA10 are expanded below with two concise fields under each heading.
-
01 · INDUSTRIAL MANUFACTURING
Discrete and Continuous Manufacturing
Discrete manufacturing and assembly productionContinuous industrial production processes -
02 · COMMERCIAL BUILDINGS
Commercial and Institutional Buildings
Commercial property and public-building operationsInstitutional building and utility operations -
03 · WATER TREATMENT
Municipal and Industrial Water Treatment
Municipal drinking-water and wastewater treatmentIndustrial process-water and environmental treatment
Technical specifications for 6EP1322-5BA10
-
Product Model6EP1322-5BA10
-
Product ParametersSITOP PSU100C 12 V DC 6.5 A power supply
-
In stock1 unit
-
ManufacturerSiemens
-
Input supply1 AC/DC
-
AC input range85 to 264 V
-
DC input range110 to 300 V
-
Line frequency47 to 63 Hz
-
Rated output voltage12 V DC
-
Rated output current6.5 A
-
Mains buffering20 ms
-
Input current1.6 A at 120 V; 0.8 A at 230 V
-
Inrush current31 A
-
Mounting35 mm DIN rail
-
Output-voltage adjustment12 to 15.5 V DC
-
EfficiencyApproximately 88%
-
Short-circuit responseConstant-current characteristic
-
Operating temperature-25 to +70 °C
-
Protection ratingIP20
View all additional
Alternative Names
6EP1322-5BA10
Siemens 6EP1322-5BA10
SITOP PSU100C SITOP PSU100C 12 V DC 6.5 A power supply
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6EP1322-5BA10 within the documented SITOP PSU100C configuration
Install 6EP1322-5BA10 only in a compatible SITOP PSU100C configuration. Confirm input supply (1 AC/DC) and ac input range (85 to 264 V) before connection.
Record the installed slot, terminal allocation, connector orientation, field wiring and every configured address or range. Preserve shielding, protective-earth and supply arrangements from the approved documentation.
After installation, restore the controlled project or parameter set. Review diagnostics and prove every affected input, output, drive function or communication path before returning the application to service.
Features:
- Exact 6EP1322-5BA10 identity
- Verified SITOP PSU100C compatibility
- Controlled configuration and functional testing
6EP1322-5BA10 requires the documented electrical, mechanical and configuration conditions before energising the installation.
INTERCHANGEABILITY
Verify 6EP1322-5BA10 before replacement
Match the full 6EP1322-5BA10 order code. Similar family names or physical outlines do not confirm interchangeability with this SITOP PSU100C 12 V DC 6.5 A power supply.
Compare the documented dc input range (110 to 300 V) and line frequency (47 to 63 Hz) with the installed article. Record firmware, hardware revision and removable media where applicable.
Back up the approved program or parameters, label all connections and retain the original configuration record. After replacement, inspect diagnostics and complete controlled functional tests before release to operation.
Features:
- Complete article and revision identity
- Recorded wiring, settings and installed configuration
- Post-installation diagnostics and functional test
Replacement of 6EP1322-5BA10 requires verification against the installed hardware, project and manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Exact-model technical data for 6EP1322-5BA10
- Applicable Siemens documentation
- Directory links by subcategory and brand
Documentation for 6EP1322-5BA10 must match the complete installed product identity and approved configuration before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size5.25 × 8 × 10 cm
-
Net weight0.32 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8504401400
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6EP1322-5BA10
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is the documented function of 6EP1322-5BA10?
6EP1322-5BA10 is a SITOP PSU100C 12 V DC 6.5 A power supply for the SITOP PSU100C platform. -
Which complete identity should be used when ordering 6EP1322-5BA10?
Use the full 6EP1322-5BA10 marking, including every suffix, and match it to the installed label and documentation. -
Which primary rating should engineers verify for 6EP1322-5BA10?
Verify input supply (1 AC/DC) and ac input range (85 to 264 V) against the installed configuration. -
Can a similar SITOP PSU100C item directly replace 6EP1322-5BA10?
Not by family name alone. Confirm interfaces, electrical ratings, firmware or hardware revision, terminal assignment and project compatibility. -
What should maintenance record before removing 6EP1322-5BA10?
Record the full label, installed position, wiring, connector orientation, configuration, status indications and diagnostic state. -
Which checks are required after installing 6EP1322-5BA10?
Complete controlled power-up, diagnostic review and functional verification of every affected signal or communication path. -
What should a distributor request for a 6EP1322-5BA10 quotation?
Request the full model, quantity, clear nameplate photographs, destination, required delivery date and any installed revision information. -
What should an MRO buyer confirm in the supplied scope for 6EP1322-5BA10?
Confirm the exact article identity, condition, included accessories, documentation, lead time and warranty before accepting the quotation.
READY TO VERIFY YOUR PART?
Get a 6EP1322-5BA10 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6EP1322-5BA10SITOP PSU100C 12 V DC 6.5 A power supplyManufacturer: SiemensView Details
-
V18345-1010261001TZIDC electro pneumatic positionerManufacturer: ABBView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
