PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic Net
- 6GK1562-1AA00
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6GK1562-1AA00 CP 5621 PCI Express Interface Card
Siemens 6GK1562-1AA00 is the SIMATIC NET CP 5621 communications processor for PG and PC systems with PCI Express. It connects the host to an MPI/PROFIBUS DP segment through an isolated RS485 interface and a screw-lock nine-pin D-sub socket. The card uses a PCI Express x1 connection and can also operate in x4, x8 or x16 slots.
The bus interface supports 9.6 kbit/s to 12 Mbit/s, with up to 32 devices per segment and up to 127 nodes when segments are linked by repeaters. The card draws up to 180 mA from 12 V and 400 mA from 3.3 V. Its documented operating range is +5 to +55 degrees C, with non-condensing humidity from 5 to 85% at 30 degrees C.
The bus interface supports 9.6 kbit/s to 12 Mbit/s, with up to 32 devices per segment and up to 127 nodes when segments are linked by repeaters. The card draws up to 180 mA from 12 V and 400 mA from 3.3 V. Its documented operating range is +5 to +55 degrees C, with non-condensing humidity from 5 to 85% at 30 degrees C.
BEFORE YOU BUY
Confirm the complete 6GK1562-1AA00 identity
ACTUAL APPLICATIONS
Application fields for 6GK1562-1AA00
These broad application fields reflect the documented function and technical characteristics of 6GK1562-1AA00.
-
01 · OIL & GAS
Petroleum and Industrial Natural Gas
Petroleum extraction and industrial natural gasNatural gas and industrial renewable electricity -
02 · CHEMICALS
Industrial Chemistry and Petrochemical Energy
Petrochemistry and conventional industrial energyIndustrial chemistry and municipal water treatment -
03 · PHARMACEUTICALS
Pharmacy and Public Health
Pharmacy, healthcare and public healthGeneral pharmaceuticals and public healthcare
Technical specifications for 6GK1562-1AA00
-
Product Model6GK1562-1AA00
-
Product ParametersCP 5621 PCI Express Interface Card
-
In stock1 unit
-
ManufacturerSiemens
-
Host busPCI Express V1.0a
-
Host lane connectionPCI Express x1
-
Compatible larger slotsx4, x8, x16
-
Field interfaceIsolated RS485 MPI/PROFIBUS DP
-
Field connector9-pin D-sub socket with screw lock
-
Minimum transfer rate9.6 kbit/s
-
Maximum transfer rate12 Mbit/s
-
Maximum direct PLC-link rate187.5 kbit/s
-
Nodes per segment32
-
Maximum network nodes with repeaters127
-
Supply rails12 V DC and 3.3 V DC
-
Maximum 12 V current180 mA
-
Maximum 3.3 V current400 mA
-
Operating temperature+5 to +55 degrees C
-
Operating humidity5 to 85% at 30 degrees C; non-condensing
View all additional
Alternative Names
6GK1562-1AA00
SIMATIC NET CP 5621
CP 5621 PCI Express Interface Card
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6GK1562-1AA00 within SIMATIC NET CP 5621
Check that the PG or PC has a suitable PCI Express slot and operating-system support for the intended SIMATIC software. The CP 5621 is a PCI Express card, so it must not be inserted into a conventional PCI slot intended for a CP 5611. Account for the standard-height, half-length card envelope inside the computer.
Install the card with the computer switched off and disconnected from its supply, using the host instructions and electrostatic handling precautions. Attach the MPI/PROFIBUS cable to the nine-pin D-sub socket and preserve the bus termination and shielding arrangement. Check the bus speed and node-address plan for the connected segment.
Install the applicable driver and select the CP 5621 as the PG/PC interface in the engineering software. Siemens documents migration from CP 5611 or CP 5611 A2 using the stated software procedure. Confirm access to the intended stations before making controller changes, and distinguish the bus rate from the additional direct PLC-link rate.
Features:
- Host bus: PCI Express V1.0a
- Host lane connection: PCI Express x1
- SIMATIC NET CP 5621
Use 6GK1562-1AA00 only within the documented SIMATIC NET CP 5621 arrangement and applicable installation instructions.
INTERCHANGEABILITY
Replace 6GK1562-1AA00 within SIMATIC NET CP 5621
Record the CP 5621 article number, installed software and PG/PC interface settings before removing the card. Note the network address, baud rate and bus-connector termination. When replacing a CP 5611 or CP 5611 A2, follow the documented migration procedure and confirm that a PCI Express slot is actually available.
Switch off the computer and disconnect its supply before opening the enclosure. Protect the board from electrostatic discharge and inspect the bus cable and screw-lock connector. Fit the replacement fully into the PCI Express slot and secure the bracket without changing the established network termination unintentionally.
Restart the computer, complete driver recognition and select the intended PG/PC interface. Verify access to the known MPI or PROFIBUS stations and inspect for address or baud-rate conflicts. Confirm stable access through the normal engineering application before treating the replacement as ready for controller maintenance.
Features:
- 6GK1562-1AA00 complete order code
- Operating humidity: 5 to 85% at 30 degrees C; non-condensing
- Retain the documented SIMATIC NET CP 5621 connection arrangement
Use 6GK1562-1AA00 only within the documented SIMATIC NET CP 5621 arrangement and applicable installation instructions.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Exact-model technical data for 6GK1562-1AA00
- Document applicability checked against the complete identity
- Directory links by subcategory and brand
Documentation for 6GK1562-1AA00 must match the installed product identity and supplied configuration.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size11.10 x 12.90 x 2.00 cm
-
Net weight0.10 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8517623700
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6GK1562-1AA00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does 6GK1562-1AA00 fit a conventional PCI slot?
No. 6GK1562-1AA00 is a PCI Express card with an x1 connection, also usable in x4, x8 or x16 slots. -
Which field connector is fitted to 6GK1562-1AA00?
6GK1562-1AA00 uses a nine-pin D-sub socket with screw lock for its MPI/PROFIBUS interface. -
What baud-rate range is supported by 6GK1562-1AA00?
6GK1562-1AA00 supports 9.6 kbit/s to 12 Mbit/s on the MPI/DP network. -
How many devices can share a segment with 6GK1562-1AA00?
The CP 5621 documentation for 6GK1562-1AA00 lists up to 32 devices per segment and 127 nodes across repeater-linked segments. -
Which supply rails are used by 6GK1562-1AA00?
6GK1562-1AA00 uses the host 12 V and 3.3 V rails, with maximum currents of 180 mA and 400 mA respectively. -
Can 6GK1562-1AA00 replace a CP 5611 without checking the computer?
No. 6GK1562-1AA00 requires PCI Express, and the documented migration procedure must be followed for the installed software. -
What should an 6GK1562-1AA00 quotation distinguish?
Quote 6GK1562-1AA00 as the CP 5621 PCI Express version and identify supplied driver media or accessories separately. -
What host details help a distributor match 6GK1562-1AA00?
Provide the 6GK1562-1AA00 application software, operating system, available PCI Express slot and existing PG/PC interface configuration.
READY TO VERIFY YOUR PART?
Get a 6GK1562-1AA00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6GK1562-1AA00CP 5621 PCI Express Interface CardManufacturer: SiemensView Details
-
4000098-516Termination interface cableManufacturer: InvensysView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
