PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S5
- C79458-L2343-A2
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
C79458-L2343-A2 operator communication module
Siemens C79458-L2343-A2 is an operator communication module in the TELEPERM M OS 525. It is used to exchange control and diagnostic data between the connected automation devices.
Its documented configuration includes system platform of TELEPERM M, operator system of OS 525, communication processor of CP 5412, and network system of SINEC L2. During operation, the operator communication module transfers data across the documented communication interfaces and reports the available link or diagnostic states.
Its documented configuration includes system platform of TELEPERM M, operator system of OS 525, communication processor of CP 5412, and network system of SINEC L2. During operation, the operator communication module transfers data across the documented communication interfaces and reports the available link or diagnostic states.
BEFORE YOU BUY
Confirm the complete operator communication module
ACTUAL APPLICATIONS
Application context for C79458-L2343-A2
The applications below show typical industry settings, application scenarios, application areas and equipment for C79458-L2343-A2. Confirm the exact TELEPERM M OS 525 configuration before use.
-
01 · GENERAL MANUFACTURING
Machine operator stations and line controls
Operator areas servedAssembly-line status displayManual sequence commands -
02 · WATER & WASTEWATER
Pump and treatment plant supervision
Plant areas servedPump-station monitoringTreatment-process alarm acknowledgement -
03 · FOOD & BEVERAGE
Batching and packaging operator panels
Production areas servedRecipe selection at batching stationsPackaging-line fault response
Technical specifications for C79458-L2343-A2
-
Product ModelC79458-L2343-A2
-
Product ParametersOperator communication module
-
In stock1 unit
-
ManufacturerSiemens
-
System PlatformTELEPERM M
-
Operator SystemOS 525
-
Communication ProcessorCP 5412
-
Network SystemSINEC L2
-
Operator FunctionCommunication and visualization
-
Configuration ScopeOperator station hardware
-
System InterfaceLocal bus and field communication
-
Documentation ClassTELEPERM M system manual
View all additional
Alternative Names
C79458-L2343-A2
C79458 L2343 A2
TELEPERM M OS 525 operator communication module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match C79458-L2343-A2 to the installed TELEPERM M OS 525
Siemens C79458-L2343-A2 is a operator communication module for the TELEPERM M OS 525. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare network system (SINEC L2), operator function (Communication and visualization) and configuration scope (Operator station hardware) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: C79458-L2343-A2
- Product class: operator communication module
- Family: TELEPERM M OS 525
The Siemens C79458-L2343-A2 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete C79458-L2343-A2 identity before exchange
Replace C79458-L2343-A2 only after matching the complete article code, operator communication module, installed TELEPERM M OS 525 role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: C79458-L2343-A2
- Product class: operator communication module
- Family check: TELEPERM M OS 525
The Siemens C79458-L2343-A2 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for C79458-L2343-A2
- Product family: TELEPERM M OS 525
- Exact Siemens identity required before service
Documentation for Siemens C79458-L2343-A2 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size30.0 x 24.0 x 10.0 cm
-
Shipping weight1.20 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537109890
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about C79458-L2343-A2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which system platform confirms the correct C79458-L2343-A2?
Match the complete C79458-L2343-A2 label and verify system platform is TELEPERM M before accepting the operator communication module. -
What must engineering check around operator system?
For C79458-L2343-A2, compare operator system (OS 525) with the installed wiring, host hardware and controlled project. -
Can another TELEPERM M OS 525 article replace this unit?
Do not select a substitute from appearance alone. Compare C79458-L2343-A2, system platform, operator system, connectors, firmware and the saved configuration. -
Which records protect the existing communication processor setup?
Before removing C79458-L2343-A2, photograph labels and connections, then save configuration evidence associated with communication processor (CP 5412). -
How should the operator communication module be inspected on arrival?
Inspect C79458-L2343-A2 for the exact article marking, connector damage, bent hardware, missing accessories and transport damage before disturbing the installed spare. -
Which functional test follows the C79458-L2343-A2 exchange?
Restore the approved setup, review diagnostics and test the affected TELEPERM M OS 525 signal, network, control or drive path at a safe operating point. -
What data should a distributor quote for this configuration?
Provide C79458-L2343-A2, quantity, nameplate photographs, installed TELEPERM M OS 525 system, required interfaces and destination country. -
How can MRO avoid receiving the wrong hardware revision?
Ask the supplier to confirm the full C79458-L2343-A2 identity, visible revision, system platform and connector layout against photographs before shipment.
READY TO VERIFY YOUR PART?
Get a C79458-L2343-A2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
