PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- 6ES7650-1AA51-2XX0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7650-1AA51-2XX0 eight-channel analog input MTA
Siemens 6ES7650-1AA51-2XX0 is an eight-channel analog input MTA in the SIMATIC PCS 7 ET 200M. It is used to acquire field signals and transfer their states or measured values to the controller.
Its documented configuration includes signal channels of 8 analog input channels, signal resolution of 16 bit, associated i/o module of 6ES7331-7NF00-0AB0 E-Stand 5 or higher, and power input of 21.6 to 28.8 V DC. During operation, the eight-channel analog input MTA receives the connected field signals, conditions their states or values and makes them available to the controller.
Its documented configuration includes signal channels of 8 analog input channels, signal resolution of 16 bit, associated i/o module of 6ES7331-7NF00-0AB0 E-Stand 5 or higher, and power input of 21.6 to 28.8 V DC. During operation, the eight-channel analog input MTA receives the connected field signals, conditions their states or values and makes them available to the controller.
BEFORE YOU BUY
Confirm the complete eight-channel analog input MTA
ACTUAL APPLICATIONS
Where 6ES7650-1AA51-2XX0 Fits in Water, Chemicals And Oil And Gas
Water, chemicals and oil and gas uses depend on installation compatibility, operating conditions and project requirements.
-
01 · WATER & WASTEWATER
Drinking Water Supply and Municipal Wastewater Treatment
Drinking water treatment and supply for municipal utility services.Municipal wastewater treatment and sanitation for urban service areas. -
02 · CHEMICAL PROCESSING
Chemical Manufacturing, Material Separation and Product Purification
Chemical production and reaction processing for industrial material manufacturing.Chemical material separation and purification within industrial production processes. -
03 · OIL & GAS
Upstream Oil Production and Natural Gas Distribution
Oilfield production and gathering operations within upstream energy industries.Natural gas transmission and distribution across regional supply networks.
Technical specifications for 6ES7650-1AA51-2XX0
-
Product Model6ES7650-1AA51-2XX0
-
Product ParametersEight-channel analog input MTA
-
In stock1 unit
-
ManufacturerSiemens
-
Signal Channels8 analog input channels
-
Signal Resolution16 bit
-
Associated I/O Module6ES7331-7NF00-0AB0 E-Stand 5 or higher
-
Power Input21.6 to 28.8 V DC
-
Maximum Normal Current0.265 A
-
Maximum Inrush Current8.238 A
-
Channel Fuse0.5 A fast-blow standard
-
Maximum Channel Current8.16 A total
-
Mounting Rail35 mm DIN rail
-
Field Wire Range24 to 14 AWG
-
Ambient Temperature-25 to +60 °C
-
Humidity5 to 95% non-condensing
-
Power IndicationGreen LED
-
Redundant PowerSupported
View all additional
Alternative Names
6ES7650-1AA51-2XX0
6ES7650 1AA51 2XX0
SIMATIC PCS 7 ET 200M eight-channel analog input MTA
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6ES7650-1AA51-2XX0 to the installed SIMATIC PCS 7 ET 200M
Siemens 6ES7650-1AA51-2XX0 is a eight-channel analog input MTA for the SIMATIC PCS 7 ET 200M. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare power input (21.6 to 28.8 V DC), maximum normal current (0.265 A) and maximum inrush current (8.238 A) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 6ES7650-1AA51-2XX0
- Product class: eight-channel analog input MTA
- Family: SIMATIC PCS 7 ET 200M
The Siemens 6ES7650-1AA51-2XX0 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6ES7650-1AA51-2XX0 identity before exchange
Replace 6ES7650-1AA51-2XX0 only after matching the complete article code, eight-channel analog input MTA, installed SIMATIC PCS 7 ET 200M role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 6ES7650-1AA51-2XX0
- Product class: eight-channel analog input MTA
- Family check: SIMATIC PCS 7 ET 200M
The Siemens 6ES7650-1AA51-2XX0 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6ES7650-1AA51-2XX0
- Product family: SIMATIC PCS 7 ET 200M
- Exact Siemens identity required before service
Documentation for Siemens 6ES7650-1AA51-2XX0 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size22.9 x 12.2 x 7.6 cm
-
Shipping weight0.40 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7650-1AA51-2XX0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which signal channels confirms the correct 6ES7650-1AA51-2XX0?
Match the complete 6ES7650-1AA51-2XX0 label and verify signal channels is 8 analog input channels before accepting the eight-channel analog input MTA. -
What must engineering check around signal resolution?
For 6ES7650-1AA51-2XX0, compare signal resolution (16 bit) with the installed wiring, host hardware and controlled project. -
Can another SIMATIC PCS 7 ET 200M article replace this unit?
Do not select a substitute from appearance alone. Compare 6ES7650-1AA51-2XX0, signal channels, signal resolution, connectors, firmware and the saved configuration. -
Which records protect the existing associated i/o module setup?
Before removing 6ES7650-1AA51-2XX0, photograph labels and connections, then save configuration evidence associated with associated i/o module (6ES7331-7NF00-0AB0 E-Stand 5 or higher). -
How should the eight-channel analog input MTA be inspected on arrival?
Inspect 6ES7650-1AA51-2XX0 for the exact article marking, connector damage, bent hardware, missing accessories and transport damage before disturbing the installed spare. -
Which functional test follows the 6ES7650-1AA51-2XX0 exchange?
Restore the approved setup, review diagnostics and test the affected SIMATIC PCS 7 ET 200M signal, network, control or drive path at a safe operating point. -
What data should a distributor quote for this configuration?
Provide 6ES7650-1AA51-2XX0, quantity, nameplate photographs, installed SIMATIC PCS 7 ET 200M system, required interfaces and destination country. -
How can MRO avoid receiving the wrong hardware revision?
Ask the supplier to confirm the full 6ES7650-1AA51-2XX0 identity, visible revision, signal channels and connector layout against photographs before shipment.
READY TO VERIFY YOUR PART?
Get a 6ES7650-1AA51-2XX0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
