PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- ET 200 ISP
- 6ES7132-7GD00-0AB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7132-7GD00-0AB0 Four-channel digital output module
Siemens 6ES7132-7GD00-0AB0 is a four-channel digital output module in the SIMATIC ET 200iSP distributed I/O family. It controls compatible intrinsically safe field actuators in hazardous process areas when used with the approved terminal module, power supply and installation conditions.
Four transistor outputs share the ET 200iSP station connection and use two output-address bytes. An intrinsically safe L+ shutdown input provides the documented shutdown path. The output has a rated operating point of 17.6 V at 20 mA, with channel switching limits and intrinsic-safety entity values that must be matched to the actuator circuit.
Four transistor outputs share the ET 200iSP station connection and use two output-address bytes. An intrinsically safe L+ shutdown input provides the documented shutdown path. The output has a rated operating point of 17.6 V at 20 mA, with channel switching limits and intrinsic-safety entity values that must be matched to the actuator circuit.
BEFORE YOU BUY
Confirm the complete four-channel digital output module
ACTUAL APPLICATIONS
Application context for 6ES7132-7GD00-0AB0
Siemens 6ES7132-7GD00-0AB0 is a four-channel digital output module in the SIMATIC ET 200iSP distributed I/O family. It supports compatible industrial automation in the industries shown below. Suitability depends on the connected field circuits, host equipment and approved configuration.
-
01 · OIL & GAS
Oil and Natural Gas Production
Natural Gas Production ProcessingOil Extraction and Processing -
02 · CHEMICAL & PETROCHEMICAL
Chemical and Petrochemical Manufacturing
Bulk Chemical Process ProductionRefining and Petrochemical Processing -
03 · PHARMACEUTICALS
Pharmaceutical Manufacturing and Processing
Pharmaceutical Batch ProductionFine Chemical Process Manufacturing
Technical specifications for 6ES7132-7GD00-0AB0
-
Product Model6ES7132-7GD00-0AB0
-
Product ParametersFour-channel digital output module
-
In stock9 units
-
ManufacturerSiemens
-
Digital output channels4
-
Shutdown inputs1 intrinsically safe L+ input
-
No-load output voltage23.1 V
-
Internal output resistance275 Ω
-
Rated operating point17.6 V at 20 mA
-
Current consumption340 mA maximum, including actuators
-
Power loss2.5 W
-
Output address length2 bytes
-
Output turn-on delay2 ms
-
Output turn-off delay1.5 ms
-
Resistive switching rate100 Hz maximum
-
Inductive switching rate2 Hz maximum
-
Cable length500 m maximum
-
IIC maximum output voltage Uo25.6 V
-
IIC maximum output current Io96 mA
View all additional
Alternative Names
6ES7132-7GD00-0AB0
SIMATIC ET 200iSP Four-channel digital output module
ET 200iSP 4 digital output channels
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7132-7GD00-0AB0 four-channel digital output module
6ES7132-7GD00-0AB0 is the four-channel digital output module for SIMATIC ET 200iSP. Match the documented interface and installed companion equipment before configuring the assembly.
Engineering should compare digital output channels (4), shutdown inputs (1 intrinsically safe L+ input) and no-load output voltage (23.1 V) with the installation requirements. Follow the manufacturer connection allocation and supply limits.
Use the applicable manufacturer instructions for wiring and configuration. Validate affected signal or communication paths, then record the accepted settings and measured results with the equipment documentation.
Features:
- Digital output channels: 4
- Shutdown inputs: 1 intrinsically safe L+ input
- No-load output voltage: 23.1 V
The 6ES7132-7GD00-0AB0 four-channel digital output module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6ES7132-7GD00-0AB0 four-channel digital output module
Replace 6ES7132-7GD00-0AB0 only after checking its complete article code, SIMATIC ET 200iSP role and documented hardware or software compatibility. Related family numbers and similar housings do not establish interchangeability.
Record the existing connector allocation, terminal numbering and configured addresses before removal. Preserve the applicable controller or network project and diagnostic information needed to restore this four-channel digital output module.
After fitting the verified article, restore its controlled configuration and test the affected functions at a safe operating point. Retain the supplied label and the final acceptance record with the asset documentation.
Features:
- Digital output channels: 4
- Shutdown inputs: 1 intrinsically safe L+ input
- No-load output voltage: 23.1 V
The 6ES7132-7GD00-0AB0 four-channel digital output module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6ES7132-7GD00-0AB0 four-channel digital output module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size3 × 12.9 × 13.65 cm
-
Shipping weight0.26kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85389091
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7132-7GD00-0AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How many actuator channels does this ET 200iSP output provide?
The module has four digital output channels. -
What is the additional L+ input used for?
It is the intrinsically safe shutdown input described in the manufacturer documentation. -
Which operating point is specified for a loaded output?
The specified point is 17.6 V at 20 mA. -
What output process-image space is required?
The output address length is two bytes. -
What are the IIC output-voltage and output-current entity limits?
The documented limits are Uo 25.6 V and Io 96 mA; evaluate the complete intrinsically safe circuit. -
How far may the field wiring extend?
The technical data specifies a maximum cable length of 500 m, subject to circuit constraints. -
What hazardous-area information belongs in an order for this output?
Specify the complete article, terminal module and required circuit and enclosure approvals. -
What documentation should be retained for an ET 200iSP output replacement?
Retain the supplied identity, certification markings and the approved intrinsically safe circuit assessment.
READY TO VERIFY YOUR PART?
Get a 6ES7132-7GD00-0AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
