PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- ET 200M
- 6ES7153-4BA00-0XB0
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
PROFINET connectivity for a twelve-module ET 200M station
The Siemens 6ES7153-4BA00-0XB0 is an IM 153-4 PN High Feature interface for SIMATIC ET 200M. It connects a station containing up to twelve S7-300 modules to PROFINET IO and supports compatible fail-safe and HART modules.
Its communication functions include shared device, isochronous operation, prioritized startup and media redundancy. Extended HART input data occupies the documented input address area, while a separately rated backplane supply serves the installed modules. Station configuration remains dependent on the selected module combination.
Its communication functions include shared device, isochronous operation, prioritized startup and media redundancy. Extended HART input data occupies the documented input address area, while a separately rated backplane supply serves the installed modules. Station configuration remains dependent on the selected module combination.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Industrial Production and Service Sectors
These industry examples describe Siemens' broader market coverage, not verified installations of this exact product. Product suitability depends on the documented configuration and engineering requirements.
-
01 · PLASTICS PROCESSING
Blow Molding and Thermoforming
Blow molding within the wider plastic product manufacturing industry.Thermoforming as a manufacturing route for shaped plastic products. -
02 · METAL FORMING
Sheet Metal and Wire Processing
Sheet metal processing within the broader metal forming industry.Wire processing for metal products across industrial manufacturing sectors. -
03 · FOOD & BEVERAGE
Edible Oil and Sugar Production
Edible oil production and processing across the food manufacturing sector.Sugar manufacturing and processing within the commercial food industry.
Technical specifications for 6ES7153-4BA00-0XB0
-
Product Model6ES7153-4BA00-0XB0
-
Product ParametersPROFINET High Feature Interface
-
ManufacturerSiemens
-
Interface typeIM 153-4 PN HF
-
Supply voltage24 V DC; permissible range 20.4-28.8 V DC
-
Maximum supply current600 mA at 24 V DC
-
Voltage-failure buffering5 ms
-
Backplane supply5 V DC, maximum 1.5 A
-
Typical power loss6 W
-
Maximum station modules12
-
Input address area672 bytes, including extended HART user data
-
Output address area192 bytes
-
Network protocolPROFINET IO
-
Shared deviceSupported; maximum 2 IO controllers
-
Redundancy functionsMRP and PROFINET system redundancy S2
-
Isochronous operationIsochronous mode and IRT supported
-
Degree of protectionIP20
-
Operating temperature0-60 degrees Celsius
View all additional
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
ET 200M PROFINET INTERFACE
Connect modular S7-300 I/O with defined station resources
The IM 153-4 PN HF forms the communication boundary between a PROFINET IO controller and an ET 200M station. A station may contain up to twelve S7-300 modules, but that allowance does not make every module combination interchangeable. Select the actual I/O modules against the applicable ET 200M configuration documentation.
Plan process-data mapping around the separate input and output limits. The manufacturer assigns 672 input bytes, including extended HART user data, and 192 output bytes to this interface. An engineering review should distinguish ordinary cyclic values from HART-related data instead of assuming that both directions have equal address capacity.
The interface requires a 24 V DC source within the specified supply range and provides a rated five-volt backplane output. Shared device, IRT and redundancy are separate supported functions. Their presence in the datasheet is not a substitute for establishing compatible controller settings, firmware and network behavior for the intended installation.
Features:
- Twelve-module station limit
- Separate input and output address areas
- Shared device and redundancy options
The Siemens 6ES7153-4BA00-0XB0 requires the documented hardware configuration, installation conditions and interface arrangement to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Compare the complete 6ES7153-4BA00-0XB0 code with the interface being removed, not just the IM 153 family name. This High Feature PROFINET model has explicit HART, fail-safe-module and shared-device capabilities. A similar enclosure or another IM 153 order number alone does not establish an equivalent station configuration.
Record the station module arrangement and controller assignment before replacement. Review the configured input and output address areas, including extended HART data, and preserve the engineering configuration required by the existing installation. For shared-device operation, check both participating IO controllers rather than validating only the controller that first discovers the interface.
Where the station participates in system redundancy, match the installed controller and firmware to the applicable Siemens requirements. The indexed product information lists specific S7-400H controllers and configuration prerequisites for this exact interface. Also inspect the supply and PROFINET connections; no unconditional drop-in successor has been established by the cited manufacturer documentation.
Features:
- Complete High Feature order-code match
- Controller and HART mapping review
- Redundancy configuration verification
The Siemens 6ES7153-4BA00-0XB0 requires replacement verification based on its complete order number, installed hardware, signal configuration and project documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.Features:
- Exact-model manufacturer data and relevant original manual pages
- Verified manufacturer product reference; separate installation document not supplied
- Accessories and supplied documentation follow the written quotation
Documentation for the Siemens 6ES7153-4BA00-0XB0 includes an independent technical summary and selected original manufacturer pages; check the applicable document edition against the delivered product and approved installation documentation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm final packed dimensions
-
Shipping weightConfirm final packed weight
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8517623790
-
OriginConfirm supplied-unit origin
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7153-4BA00-0XB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which distributed I/O family uses this interface?
It is the IM 153-4 PN HF interface for SIMATIC ET 200M, with support for a station of up to twelve S7-300 modules. -
Does this order code use PROFIBUS or PROFINET?
The documented bus protocol is PROFINET IO. The Siemens catalog phrase SIMATIC DP does not change the specified PROFINET interface into a PROFIBUS connection. -
Can more than one controller use the station?
Shared device is supported with a maximum of two IO controllers. The controller and station configuration must implement that arrangement. -
What is the available process-data address area?
The datasheet specifies 672 input bytes, including extended HART user data, and 192 output bytes. These are interface address limits, not a claim about the channel count of individual modules. -
Which redundancy functions are documented?
The exact-model datasheet lists media redundancy protocol MRP and PROFINET system redundancy S2. Their use still depends on the relevant controller, firmware and network configuration. -
Is the interface protected for exposed outdoor mounting?
Its documented protection rating is IP20 and its operating temperature range is 0-60 degrees Celsius. It should not be treated as an IP65/IP67 field-mounted interface.
READY TO VERIFY YOUR PART?
Get a 6ES7153-4BA00-0XB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6ES7153-4BA00-0XB0PROFINET High Feature InterfaceManufacturer: SiemensView Details
-
6ES7288-1CR40-0AA1CPU CR40 AC/DC/Relay ControllerManufacturer: SiemensView Details -
6ES7350-1AH02-0AE0FM 350-1 high-speed counter moduleManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
