PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- ET 200S
- 6ES7135-4LB01-0AB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7135-4LB01-0AB0 Two-Channel Voltage Output Module
Siemens 6ES7135-4LB01-0AB0 is an ET 200S High Feature analog output module with two voltage channels. It supplies either -10 to +10 V or 1 to 5 V signals and occupies four output bytes. The all-channel cycle time is a maximum of 2.5 ms, supporting coordinated voltage setpoints within the distributed station.
The module takes 24 V DC from its power module and draws up to 130 mA without connected loads, plus up to 10 mA from the 3.3 V backplane. Voltage loads require at least 1 kohm resistance and no more than 1 microfarad capacitance. Two-wire and four-wire connections are supported, with four-wire wiring available for line-resistance compensation.
The module takes 24 V DC from its power module and draws up to 130 mA without connected loads, plus up to 10 mA from the 3.3 V backplane. Voltage loads require at least 1 kohm resistance and no more than 1 microfarad capacitance. Two-wire and four-wire connections are supported, with four-wire wiring available for line-resistance compensation.
BEFORE YOU BUY
Confirm the complete 6ES7135-4LB01-0AB0 identity
ACTUAL APPLICATIONS
Application fields for 6ES7135-4LB01-0AB0
These broad application fields reflect the documented function and technical characteristics of 6ES7135-4LB01-0AB0.
-
01 · CHEMICALS
Petrochemistry and Industrial Water Treatment
Industrial chemistry and oil and gasPetrochemistry and industrial water and wastewater -
02 · WATER & WASTEWATER
Municipal Water and Industrial Wastewater
Municipal drinking water and wastewater treatmentIndustrial wastewater treatment and water reclamation -
03 · POWER GENERATION
Thermal Electricity and Renewable Energy
Thermal electricity generation and industrial energyRenewable electricity generation and hydroelectric power
Technical specifications for 6ES7135-4LB01-0AB0
-
Product Model6ES7135-4LB01-0AB0
-
Product ParametersTwo-Channel Voltage Output Module
-
In stock1 unit
-
ManufacturerSiemens
-
Analog output channels2
-
Load supply24 V DC from power module
-
Load-supply current maximum130 mA; without load
-
Backplane current maximum10 mA at 3.3 V DC
-
Power loss maximum2 W
-
Output address allocation4 bytes
-
Voltage output ranges-10 to +10 V; 1 to 5 V
-
Maximum all-channel cycle2.5 ms
-
Voltage-output short-circuit current25 mA maximum
-
Minimum output load resistance1 kohm
-
Maximum capacitive load1 microfarad
-
Shielded cable length maximum200 m
-
Resistive-load settling time0.1 ms
-
Output ripple+/-0.02% of output range
-
Operational voltage error+/-0.07% over temperature
View all additional
Alternative Names
6ES7135-4LB01-0AB0
SIMATIC ET 200S
Two-Channel Voltage Output Module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7135-4LB01-0AB0 within SIMATIC ET 200S
Allocate four output bytes and select each channel voltage range in the ET 200S project. Use the actual -10 to +10 V or 1 to 5 V range when scaling the controller values; the range selection changes the usable representation and must agree with the connected voltage input.
Supply the module through the documented 24 V DC power module and include its 130 mA unloaded demand in the load-power budget. Check the receiving input impedance against the 1 kohm minimum and keep capacitive loading within 1 microfarad. The maximum short-circuit output current is 25 mA.
Choose two-wire or four-wire actuator wiring deliberately. The two-wire connection does not compensate line resistance, whereas the four-wire arrangement supports that compensation. Apply the manufacturer shielding practice within the 200 m cable limit and consider the specified 0.1 ms resistive-load settling time alongside the station cycle.
Features:
- Analog output channels: 2
- Load supply: 24 V DC from power module
- SIMATIC ET 200S
Use 6ES7135-4LB01-0AB0 only within the documented SIMATIC ET 200S arrangement and applicable installation instructions.
INTERCHANGEABILITY
Replace 6ES7135-4LB01-0AB0 within SIMATIC ET 200S
Record the two channel ranges, output scaling, substitute values and wire arrangement before exchanging the module. Keep the full 6ES7135-4LB01-0AB0 identifier and the High Feature voltage-output function; a current-output module is not an equivalent substitute merely because it has two channels.
Compare the terminal-module arrangement and the separate sensing connections used for four-wire operation. Isolate affected field circuits using the applicable ET 200S procedure, then transfer the wiring identification without joining sensing conductors to unrelated common terminals.
Restore the original channel configuration and verify a controlled voltage command on each channel before releasing the connected process. Check channel diagnostics and the expected substitute response. Confirm the measured voltage at the receiving equipment rather than relying solely on the PLC command value.
Features:
- 6ES7135-4LB01-0AB0 complete order code
- Operational voltage error: +/-0.07% over temperature
- Retain the documented SIMATIC ET 200S connection arrangement
Use 6ES7135-4LB01-0AB0 only within the documented SIMATIC ET 200S arrangement and applicable installation instructions.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Exact-model technical data for 6ES7135-4LB01-0AB0
- Document applicability checked against the complete identity
- Directory links by subcategory and brand
Documentation for 6ES7135-4LB01-0AB0 must match the installed product identity and supplied configuration.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size1.50 x 8.10 x 5.20 cm
-
Net weight0.04 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7135-4LB01-0AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does 6ES7135-4LB01-0AB0 supply current-loop outputs?
6ES7135-4LB01-0AB0 is a voltage-output module with -10 to +10 V and 1 to 5 V ranges; it is not a 4-20 mA output module. -
How much output memory does 6ES7135-4LB01-0AB0 occupy?
6ES7135-4LB01-0AB0 requires four output bytes for its two channels. -
What minimum voltage-input resistance suits 6ES7135-4LB01-0AB0?
The receiving input for 6ES7135-4LB01-0AB0 must present at least 1 kohm, with a maximum capacitive load of 1 microfarad. -
Why select four-wire wiring on 6ES7135-4LB01-0AB0?
Four-wire voltage wiring on 6ES7135-4LB01-0AB0 supports line-resistance compensation; the listed two-wire arrangement does not. -
What is the maximum channel-group cycle for 6ES7135-4LB01-0AB0?
The 6ES7135-4LB01-0AB0 specification gives 2.5 ms as the maximum cycle for all channels. -
Which error figure applies across the 6ES7135-4LB01-0AB0 temperature range?
The specified operational voltage error for 6ES7135-4LB01-0AB0 is +/-0.07% of the output range. -
What should a 6ES7135-4LB01-0AB0 spare quotation distinguish?
Identify 6ES7135-4LB01-0AB0 as the two-channel High Feature voltage-output module, and state separately whether compatible terminal hardware is included. -
Which wiring details help a distributor match 6ES7135-4LB01-0AB0?
Provide the full 6ES7135-4LB01-0AB0 label, required voltage ranges and whether the existing installation uses two-wire or four-wire output wiring.
READY TO VERIFY YOUR PART?
Get a 6ES7135-4LB01-0AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6ES7135-4LB01-0AB0Two-Channel Voltage Output ModuleManufacturer: SiemensView Details
-
6SL3210-1KE14-3UF2G120C 1.5 kW Compact InverterManufacturer: SiemensView Details
-
6SL3210-5FE12-0UF0V90 PN 2.5 kW Servo DriveManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
