PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- ET 200S
- 6ES7151-3BB23-0AB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7151-3BB23-0AB0 IM 151-3 PN FO Interface Module
Siemens 6ES7151-3BB23-0AB0 is an IM 151-3 PN FO interface module for an ET 200S distributed I/O station. Its integrated two-port optical PROFINET connection links the station to the controller at 100 Mbit/s. A station can contain up to 63 I/O modules within a maximum width of 2 m.
The interface provides 256 input bytes and 256 output bytes, with support for IRT, MRP media redundancy, shared-device operation and PROFIenergy. It operates from 24 V DC and draws up to 200 mA. The specified supply-interruption buffer is 20 ms, and the maximum power dissipation is 5 W.
The interface provides 256 input bytes and 256 output bytes, with support for IRT, MRP media redundancy, shared-device operation and PROFIenergy. It operates from 24 V DC and draws up to 200 mA. The specified supply-interruption buffer is 20 ms, and the maximum power dissipation is 5 W.
BEFORE YOU BUY
Confirm the complete 6ES7151-3BB23-0AB0 identity
ACTUAL APPLICATIONS
Application fields for 6ES7151-3BB23-0AB0
These broad application fields reflect the documented function and technical characteristics of 6ES7151-3BB23-0AB0.
-
01 · CHEMICALS
Industrial Chemistry, Water and Energy
Industrial chemistry and conventional electricity generationPetrochemistry and industrial wastewater and water -
02 · POWER GENERATION
Thermal Electricity and Renewable Energy
Thermal electricity generation and industrial energyRenewable electricity generation and hydroelectric power -
03 · PULP & PAPER
Pulp, Paper and Industrial Energy
Pulp and paper and industrial energyPaper and industrial wastewater and water
Technical specifications for 6ES7151-3BB23-0AB0
-
Product Model6ES7151-3BB23-0AB0
-
Product ParametersIM 151-3 PN FO Interface Module
-
In stock1 unit
-
ManufacturerSiemens
-
Rated supply24 V DC
-
Maximum supply current200 mA
-
Maximum dissipation5 W
-
Maximum I/O modules63
-
Maximum station width2 m
-
PROFINET optical ports2
-
Transmission speed100 Mbit/s
-
Input address capacity256 bytes
-
Output address capacity256 bytes
-
Supply interruption buffer20 ms
-
Shared-device controllers2
-
IRTSupported
-
Media redundancyMRP
-
Network diagnosticsSNMP / LLDP
-
PROFIenergySupported
View all additional
Alternative Names
6ES7151-3BB23-0AB0
SIMATIC ET 200S
IM 151-3 PN FO Interface Module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7151-3BB23-0AB0 within SIMATIC ET 200S
Build the ET 200S station within both limits: no more than 63 I/O modules and no more than 2 m overall station width. Check the total configured input and output address requirements against the separate 256-byte limits before downloading the hardware configuration.
Use the optical PROFINET ports for the intended fiber network and configure the device name and controller assignment in the engineering project. Where shared-device operation is used, assign the station modules to the intended two controllers rather than assuming each controller owns every module.
Configure IRT or MRP only as part of a compatible network design. Include the 200 mA maximum interface current and the individual I/O power requirements in the station supply calculation. The 20 ms interruption buffer applies to the interface specification and does not replace a complete supply-continuity assessment.
Features:
- Rated supply: 24 V DC
- Maximum supply current: 200 mA
- SIMATIC ET 200S
Use 6ES7151-3BB23-0AB0 only within the documented SIMATIC ET 200S arrangement and applicable installation instructions.
INTERCHANGEABILITY
Replace 6ES7151-3BB23-0AB0 within SIMATIC ET 200S
Record the complete optical-interface code, device name, station layout and controller assignments before replacing the interface. A copper PROFINET version is not the same connection variant as 6ES7151-3BB23-0AB0, even where the station family is ET 200S.
Identify both optical connections and protect the fiber ends during the exchange. Keep the terminal and I/O sequence consistent with the saved hardware configuration, and follow the applicable ET 200S procedure for supply isolation and module handling.
Restore the PROFINET identity and verify the configured modules, input/output image and controller ownership. Review network and station diagnostics before returning the station to operation, including redundancy or isochronous settings where these are enabled.
Features:
- 6ES7151-3BB23-0AB0 complete order code
- PROFIenergy: Supported
- Retain the documented SIMATIC ET 200S connection arrangement
Use 6ES7151-3BB23-0AB0 only within the documented SIMATIC ET 200S arrangement and applicable installation instructions.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Exact-model technical data for 6ES7151-3BB23-0AB0
- Document applicability checked against the complete identity
- Directory links by subcategory and brand
Documentation for 6ES7151-3BB23-0AB0 must match the installed product identity and supplied configuration.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size6.00 x 11.95 x 7.50 cm
-
Net weight0.15 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7151-3BB23-0AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does 6ES7151-3BB23-0AB0 use copper RJ45 ports?
No. 6ES7151-3BB23-0AB0 is the PN FO variant with two optical PROFINET ports. -
How many I/O modules can 6ES7151-3BB23-0AB0 address?
6ES7151-3BB23-0AB0 supports up to 63 I/O modules, subject also to the 2 m station-width limit. -
What are the separate address limits of 6ES7151-3BB23-0AB0?
6ES7151-3BB23-0AB0 provides up to 256 input bytes and 256 output bytes. -
Can 6ES7151-3BB23-0AB0 be shared between two controllers?
Yes. The 6ES7151-3BB23-0AB0 specification supports shared-device operation with two controllers; module ownership must be configured. -
Which network redundancy method is listed for 6ES7151-3BB23-0AB0?
6ES7151-3BB23-0AB0 supports MRP media redundancy in a compatible PROFINET arrangement. -
What power budget should include the 6ES7151-3BB23-0AB0 interface itself?
Allow up to 200 mA at 24 V DC for 6ES7151-3BB23-0AB0, in addition to the station I/O requirements. -
How should a distributor distinguish a 6ES7151-3BB23-0AB0 spare from other IM 151 modules?
The quotation should retain the complete 6ES7151-3BB23-0AB0 article number and explicitly identify its optical PROFINET interface. -
Which configuration records help quote a replacement 6ES7151-3BB23-0AB0 station?
Provide the 6ES7151-3BB23-0AB0 code, I/O sequence, optical connection arrangement and any shared-device or IRT requirements.
READY TO VERIFY YOUR PART?
Get a 6ES7151-3BB23-0AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6ES7151-3BB23-0AB0IM 151-3 PN FO Interface ModuleManufacturer: SiemensView Details
-
6SL3210-1KE14-3UF2G120C 1.5 kW Compact InverterManufacturer: SiemensView Details
-
6SL3210-5FE12-0UF0V90 PN 2.5 kW Servo DriveManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
