PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-1500
- 6ES7513-1FL02-0AB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7513-1FL02-0AB0 combines standard and fail-safe control
Siemens 6ES7513-1FL02-0AB0 is the SIMATIC S7-1500F CPU 1513F-1 PN, a fail-safe central processing unit with 450 KB of program work memory and 1.5 MB of data work memory. Its integrated PROFINET IRT interface has two switched ports, and the documented typical bit-operation time is 40 ns.
A compatible SIMATIC Memory Card, configured I/O and the approved engineering project are required. Safety performance depends on the complete validated F-system; CPU processing time alone does not establish a machine safety response time. Check the actual hardware and firmware against the applicable Siemens documentation.
A compatible SIMATIC Memory Card, configured I/O and the approved engineering project are required. Safety performance depends on the complete validated F-system; CPU processing time alone does not establish a machine safety response time. Check the actual hardware and firmware against the applicable Siemens documentation.
BEFORE YOU BUY
Keep the safety configuration traceable
ACTUAL APPLICATIONS
Where 6ES7513-1FL02-0AB0 supports validated control tasks
The exact Siemens datasheet documents fail-safe operation, isochronous I/O and trace recording. The scenarios below require the matching project, hardware and engineering validation.
-
01 · SAFETY LOGIC
Process validated safety signals
Use the F-CPU with the approved fail-safe program and compatible safety I/O to process the engineered protection functions. Confirm the complete signal path, response-time requirement and acceptance records; the controller alone does not establish the safety rating of a machine. -
02 · TIMED ACQUISITION
Synchronize process measurements
The integrated PROFINET IRT interface supports isochronous operation for engineered I/O timing. Align the configured task and capable field devices to the documented cycle limits, then verify consistent acquisition and processing rather than treating bit-operation speed as an I/O update time. -
03 · SEQUENCE ANALYSIS
Record intermittent process events
Use the documented trace functionality to capture selected controller variables around a process event. Assign suitable recording conditions and evaluate the captured sequence with the engineering team; the trace supplements diagnostics without changing the approved protection or machine-control logic.
Technical specifications for 6ES7513-1FL02-0AB0
-
Product Model6ES7513-1FL02-0AB0
-
Product ParametersFail-Safe Central Processing Unit
-
In stock1 unit
-
ManufacturerSiemens
-
Program work memory450 KB
-
Data work memory1.5 MB
-
Typical bit-operation time40 ns
-
PROFINET interfaceOne X1 interface with two-port IRT switch
-
Permissible DC supply19.2 to 28.8 V DC; rated 24 V DC
-
Maximum input current0.95 A (07/2018 datasheet)
-
Typical power loss5.7 W
-
Load memoryRequired SIMATIC Memory Card; maximum 32 GB
-
Trace recordingFour traces; up to 512 KB each (07/2018)
-
Central rack capacityUp to 32 modules: CPU plus 31
View all additional
Alternative Names
6ES7513-1FL02-0AB0
CPU 1513F-1 PN
SIMATIC S7-1500F PROFINET Controller
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SIMATIC S7-1500F ENGINEERING
Validate the complete F-system configuration
Siemens 6ES7513-1FL02-0AB0 is the SIMATIC S7-1500F CPU 1513F-1 PN, a fail-safe central processing unit with 450 KB of program work memory and 1.5 MB of data work memory. Its integrated PROFINET IRT interface has two switched ports, and the documented typical bit-operation time is 40 ns.
A compatible SIMATIC Memory Card, configured I/O and the approved engineering project are required. Safety performance depends on the complete validated F-system; CPU processing time alone does not establish a machine safety response time. Check the actual hardware and firmware against the applicable Siemens documentation.
The technical extract covers the 07/2018 datasheet edition. Verify later firmware features separately. Engineer power, I/O addressing and PROFINET topology with the applicable system and safety manuals, retaining the approved project and validation records.
Features:
- 450 KB program and 1.5 MB data work memory
- One PROFINET IRT interface with two ports
- Standard and F-program configuration must match
The Siemens 6ES7513-1FL02-0AB0 requires the approved safety project, I/O configuration and actual firmware to be checked for reliable system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Record 6ES7513-1FL02-0AB0 together with the installed firmware and hardware identification. Preserve the approved F-project, its version records and the assigned I/O/device identities. The current Siemens Mall lists this article as a spare part with PM410 Product cancellation.
Place the process in its prescribed safe state and isolate the station supply before physical work. Use the system-manual rail and X80 connection procedures, keep the Memory Card and identified network cables controlled, and prevent an unplanned restart.
After restoring the approved configuration, check diagnostics and complete the required safety acceptance and restart procedure with qualified personnel. Similar network ports or the same CPU family name do not prove that a substituted controller satisfies the existing safety design.
Features:
- Record the approved F-project baseline
- Preserve F-I/O and network identities
- Complete required acceptance before restart
The Siemens 6ES7513-1FL02-0AB0 CPU 1513F-1 PN requires replacement verification of the safety configuration and site acceptance conditions before return to service.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
Features:
- Available Siemens document references are confirmed before order
- Software licensing and project backups remain the customer's responsibility
- Accessories are supplied only when listed in the quotation
Documentation for the Siemens 6ES7513-1FL02-0AB0 The technical extract identifies its datasheet edition; match all firmware-dependent limits and safety requirements to the actual installation and confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size15.1 × 15.1 × 4.7 cm
-
Shipping weightApprox. 0.41 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7513-1FL02-0AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
May the safety program use every language available for the standard program?
No. The exact-model datasheet explicitly identifies LAD and FBD as including fail-safe programming. Its separate listing of STL, SCL and GRAPH for the CPU should not be interpreted as permission to use every language inside an F-program. Follow the applicable SIMATIC Safety programming rules. -
How deep may nested F-block calls extend in the documented configuration?
The 07/2018 datasheet distinguishes a general nesting depth of 24 per priority class from up to eight levels for F-blocks. Check the generated safety program against the applicable version limits; the general CPU nesting value is not the F-block limit. -
Does the 40 ns bit specification define emergency-stop response time?
No. That value describes a typical CPU bit operation. The protective-function response depends on the configured F-program execution, safety I/O, communication and field equipment. Use the Siemens safety-system procedure to calculate and validate the complete response path. -
Can a dark display at elevated cabinet temperature indicate normal CPU operation?
Yes. The cited datasheet states that the display is typically switched off at 50 degrees C during horizontal operation, while the CPU horizontal upper limit is 60 degrees C. Inspect diagnostics and the actual environmental conditions; do not conclude that the CPU has failed solely because the screen is dark. -
What recording capacity is specified for troubleshooting a sporadic sequence fault?
The cited datasheet supports four configurable traces with up to 512 KB of data per trace. Select the signals and recording conditions to capture the event of interest, then evaluate the trace alongside diagnostics without altering the validated safety logic. -
Does a 100 ms OPC UA sample time promise a 100 ms client update?
No. The 07/2018 specification separates a minimum sampling time of 100 ms from a minimum send time of 500 ms. Check the firmware-specific server settings and the client subscription; sampled and delivered values are different timing stages. -
What must a purchasing team collect beyond a photograph of the F-CPU label?
Obtain the installed hardware and firmware identity, the controlled project baseline and the responsible engineer's compatibility and acceptance requirements. The F designation identifies the CPU class but does not document the surrounding safety I/O, configured functions or authorization to restart the machine. -
Does the highest achievable SIL or PL value apply automatically after replacement?
No. The exact datasheet gives SIL 3 and PL e as the highest achievable classes in safety mode. Those values do not certify the complete replacement installation: compatible components, correct safety engineering and the required system validation remain necessary.
READY TO VERIFY YOUR PART?
Get a 6ES7513-1FL02-0AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
