Close Menu
Get Parts Quote
Name
Company *
WhatsApp / WeChat (For Faster Quote) *
Email *
Address
City
State / Province / Region
Zipcode
Country
Quantity *
Part Number *
Manufacturer
Preferred Condition
Additional Information
Cancel
Fast Shipping Available
Siemens 6ES7522-1BL01-0AB0
· Product image is representative; revision or series may vary. Contact us to request a specific version.
Ships by Saturday, November 21

6ES7522-1BL01-0AB0

32-channel digital output module

Shipping Information

  • For inventory products, we support same day shipping upon payment.
  • For urgent needs, we offer same-day shipping on most items for orders placed before 2:00 PM UTC+8 Simply mention your preferred next-day shipping when place the order, and your order will be prioritized to minimize downtime.
  • For indent items, typical turnaround is 1-3 weeks, depending on parts availability and scarcity.
Customs & Documentation
We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
Payment
Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
Product Condition
Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
Quantity
Mobile *
Country/Region *
E-mail *
Company
Content *
(gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
For more information on how your data is processed and stored by Amikong please read our privacy policy.
  • 20+

    years in automation
  • ISO 9001

    certified quality system
  • 12 months

    amikon warranty
  • 2-hour reply

    from your account manager
  • Success Story

    solutions in action
PRODUCT DESCRIPTION

Thirty-two sourcing outputs with channel-level diagnostics and configurable response

The Siemens 6ES7522-1BL01-0AB0 is a High Feature digital output module for SIMATIC S7-1500 and ET 200MP configurations. It provides 32 transistor outputs, arranged in electrically isolated groups of eight, for switching nominal 24 V DC loads.

Each channel is rated at 0.5 A, with aggregate loading subject to the manufacturer's temperature and mounting-position limits. Configurable diagnostics and substitute responses support fault handling, while switching-cycle counting requires the documented firmware, hardware status and engineering configuration.
ACTUAL APPLICATIONS

Where 6ES7522-1BL01-0AB0 Fits Across Industrial Sectors

Industrial uses span production, processing and utility operations, subject to compatible configuration and the applicable engineering requirements.
  • 01 · FOOD & BEVERAGE

    Food Processing and Beverage Production

    Food preparation and processing for packaged consumer food products.Beverage manufacturing and filling for commercial drinks distribution markets.
  • 02 · PACKAGING

    Retail Packaging and Industrial Product Packing

    Retail product packaging for consumer goods presentation and distribution.Industrial packing and handling throughout commercial product manufacturing operations.
  • 03 · WATER & WASTEWATER

    Water Supply and Wastewater Treatment

    Drinking water preparation and distribution for municipal supply services.Wastewater collection and treatment supporting municipal and industrial operations.

Technical specifications for 6ES7522-1BL01-0AB0

  • Product Model
    6ES7522-1BL01-0AB0
  • Product Parameters
    32-channel digital output module
  • Manufacturer
    Siemens
  • Output channels
    32, sourcing transistor outputs
  • Load-group isolation
    Electrically isolated groups of 8 channels
  • Nominal output voltage
    24 V DC
  • Rated channel current
    0.5 A per channel; respect load and derating limits
  • Aggregate output current
    Up to 4 A/group and 16 A/module, subject to derating
  • Output short-circuit protection
    Clocked electronic protection; typical response threshold 1 A
  • Signal-1 output voltage
    Minimum L+ minus 0.8 V
  • Signal-0 residual current
    Maximum 0.5 mA; can cause indicator flicker
  • Resistive-load output delay
    Maximum 100 us ON / 500 us OFF
  • Maximum switching frequency
    100 Hz resistive; 0.5 Hz inductive DC-13; 10 Hz lamp
  • Typical power loss
    3.5 W (06/2018 manufacturer specification)
  • CPU STOP response
    Turn off, retain last value, or output substitute value 1
  • Switching-cycle counter
    FW V1.1.0 or later; supported hardware and configuration required
  • Module dimensions
    35 x 147 x 129 mm (W x H x D), not packed size
View all additional
SYSTEM & REPLACEMENT CHECK

Information needed before ordering

Three direct checks to secure your system integration and minimize ordering risks.

Information

System integration Replacement check Manuals & support
HIGH FEATURE DIGITAL OUTPUTS

Organize loads, diagnostics and process data around the actual configuration

The output stage separates 32 channels into four isolated load groups. Each channel sources nominal 24 V DC, but the usable group current depends on installation orientation and temperature. Review the manufacturer's derating curves with the connected loads; a channel's 0.5 A rating does not remove the aggregate-current restriction.
Configuration determines how the controller sees the outputs. The module supports a single 32-channel arrangement, while PROFINET configurations can divide it into four eight-channel submodules or use module-internal Shared Output. Quality Information adds status bits to the process image, so addresses and controller ownership must match the selected configuration.
Channel diagnostics and the configured CPU STOP response are separate engineering choices. Supply loss, wire break and short circuit can be monitored, while outputs can switch off, retain their last value or use the configured substitute state. Switching-cycle maintenance additionally requires firmware V1.1.0 or later and the documented software support.

Features:

  • Four isolated eight-channel load groups
  • Configuration-dependent QI and Shared Output
  • Firmware-dependent switching-cycle maintenance
The Siemens 6ES7522-1BL01-0AB0 requires the documented hardware configuration, installation conditions and interface arrangement to be verified before system integration and commissioning.
INTERCHANGEABILITY

Verify the complete replacement identity before commissioning

Start with the complete 6ES7522-1BL01-0AB0 identity and the unit's hardware functional status. Siemens distinguishes FS01 with firmware V1.0.0 from FS02 with V1.1.0; the former cannot be upgraded to the latter firmware. A spare intended to retain switching-cycle counting therefore needs more than a matching module designation.
Compare the existing front connector, potential-group wiring and project configuration before replacing the module. Reusing wiring does not verify that the configured channels, Quality Information addresses or Shared Output ownership are unchanged. In the documented V1.0 shared-device configuration, failure of one participating controller can invoke the substitute response across all submodules.
With all supply voltages isolated, check the terminal assignment and the load-current budget before fitting a replacement. The equipment manual warns of an approximately 50-microsecond output pulse when the 24 V supply is switched on. It also limits each potential jumper to 8 A; retain these conditions in the commissioning review.

Features:

  • Full order number and FS/FW comparison
  • Front-connector and process-image review
  • Power-up pulse and jumper-current checks
The Siemens 6ES7522-1BL01-0AB0 requires replacement verification based on its complete order number, installed hardware, signal configuration and project documentation.
DOCUMENTATION STATUS

Browse the Manuals, Datasheets, Official Documents, Links

Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.

Features:

  • Exact-model manufacturer data and relevant original manual pages
  • Original warnings, operating limits and derating references
  • Accessories and supplied documentation follow the written quotation
Documentation for the Siemens 6ES7522-1BL01-0AB0 includes an independent technical summary and selected original manufacturer pages; check the applicable document edition against the delivered product and approved installation documentation.

Important notice

Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION

Commercial terms without hidden steps

Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
  • 01

    Shipping & delivery

    Dispatch
    Eligible stock: same / next day
    Carriers
    DHL, FedEx or UPS
    Ship from
    Xiamen, China
    Packed size
    Confirm final packed dimensions
    Shipping weight
    Confirm final packed weight
  • 02

    Payment & customs

    Payment
    Bank transfer (T/T)
    Currencies
    USD · EUR · GBP · RMB
    Credit cards
    Not accepted
    HS reference
    8538900000
    Origin
    Confirm supplied-unit origin
  • 03

    Warranty & returns

    Warranty
    12 months from AMIKON
    Inspection
    Label, condition and packing checks
    Returns
    Prior RMA authorisation required
    Compatibility
    Confirm before order
    OEM warranty
    Does not apply
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
  • Part checked

    Full suffix recorded
  • Condition checked

    Label and appearance
  • Packing checked

    Antistatic protection
  • Tracking supplied

    Established couriers
  • Sandy Lin

    Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS

Questions buyers ask about 6ES7522-1BL01-0AB0

Direct answers about identity, compatibility, stock, warranty, payment and shipping.
  • Is this the High Feature or Standard output module?

    The complete BL01 order number identifies DQ 32x24VDC/0.5A HF. Do not substitute the BL00 Standard version solely because the channel count and housing are similar.
  • Can all channels operate at their rated current?

    The manual lists 0.5 A per channel, up to 4 A per group and 16 A per module. Its mounting-position and ambient-temperature derating curves still apply; the maximum figures are not unconditional continuous-loading promises.
  • Does every hardware version provide switching-cycle counting?

    No. The function requires firmware V1.1.0 or later and a supported configuration. The documented FS01/V1.0.0 hardware cannot be upgraded to V1.1.0. Verify the supplied unit's functional status and engineering requirements.
  • Which fault conditions can be diagnosed?

    The manufacturer documents supply-voltage monitoring, wire-break and short-circuit diagnostics. Enable and interpret these according to the selected configuration; diagnostic scope differs between the integrated/PROFINET and PROFIBUS configurations.
  • Is the front connector included?

    Siemens lists the front connector as a separately ordered component. Confirm the actual connector, potential jumpers and other supplied items in the written quotation; the module's catalogue accessories do not establish the contents of an individual sale.
  • Is it a standalone fail-safe output module?

    No standalone fail-safe rating is established by this page. The 2018 manual describes conditional safety-related tripping of standard modules from FS02; this does not replace the specified safety architecture, current manufacturer guidance or a system-level safety assessment.
  • Which document version supports these values?

    The linked equipment-manual excerpt is the Siemens 06/2018 edition. Hardware and firmware must be checked against the installed unit. Values that differ between available document editions, including the lower supply-voltage limit, are not presented here as a universal rating.
READY TO VERIFY YOUR PART?

Get a 6ES7522-1BL01-0AB0 quote with price, lead time and revision check.

Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product

Product Browsing History