PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-1500
- 6ES7521-1BH50-0AA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Sixteen sourcing inputs for SIMATIC S7-1500 automation
Siemens 6ES7521-1BH50-0AA0 is a SIMATIC S7-1500 digital input module with sixteen 24 V DC sourcing inputs. It reads M-switching signals from compatible switches and proximity sensors, bringing discrete machine-status information into an S7-1500 or ET 200MP station.
The module uses IEC 61131 type 3 inputs with a fixed input delay and a separately ordered front connector. Before installation, verify sensor polarity, supply limits, terminal assignment and station configuration; this basic module does not provide wire-break monitoring or hardware interrupts.
The module uses IEC 61131 type 3 inputs with a fixed input delay and a separately ordered front connector. Before installation, verify sensor polarity, supply limits, terminal assignment and station configuration; this basic module does not provide wire-break monitoring or hardware interrupts.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Discrete status inputs in Siemens factory automation applications
These application fields draw on Siemens S7-1500 series examples. They illustrate where compatible discrete status inputs may be used; the examples do not verify installation of this exact article. Sensor polarity, response time and the complete station design must be checked.
-
01 · PACKAGING MACHINERY
Status monitoring in factory packaging equipment
Siemens provides S7-1500 packaging libraries for machine operation and line coordination. Where the engineered sensor circuits are compatible, this input module can read normal cycle-status and switch signals; it does not replace a high-speed measuring input or a safety input. -
02 · MIXING AND FILLING
Discrete feedback in mixing and filling systems
Siemens' S7-1500 example mixes colors and fills cans transported by conveyor. Compatible process switches can supply discrete sequence feedback through this module; analog measurement, recipe logic and actuator control remain separate functions of the complete engineered system. -
03 · FACTORY MATERIAL HANDLING
Switch feedback in conveyor routing systems
Siemens' transport example routes packages through a rotary table to destination conveyors using sensor feedback. This module can be considered for compatible, non-time-critical M-switching status signals; motion control and fast position capture require their own validated hardware and configuration.
Technical specifications for 6ES7521-1BH50-0AA0
-
Product Model6ES7521-1BH50-0AA0
-
Product ParametersSourcing Digital Input Module
-
In stock3 units
-
ManufacturerSiemens
-
Digital input channels16
-
Input circuitSourcing; reading M
-
Rated input voltage24 V DC
-
Permitted supply range20.4 to 28.8 V DC
-
Input characteristicIEC 61131 type 3
-
Input current at signal 14.5 mA typical
-
Input delay3 to 4 ms; fixed
-
Input group isolationOne group of 16 isolated from backplane
-
Backplane power consumption0.9 W
-
Typical power loss2.8 W
-
Two-wire sensor quiescent current1.5 mA maximum
-
Maximum signal cable lengthShielded 1000 m; unshielded 600 m
-
Operating ambient temperatureHorizontal 0 to 60 C; vertical 0 to 40 C
-
Status indicatorsRUN, ERROR and channel LEDs
View all additional
Alternative Names
SIMATIC S7-1500 DI 16x24VDC SRC BA
ET 200MP sourcing digital input module
6ES75211BH500AA0
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SIMATIC S7-1500 / ET 200MP ARCHITECTURE
Integrate sourcing inputs into the configured Siemens station
Siemens 6ES7521-1BH50-0AA0 provides sixteen sourcing digital inputs for SIMATIC S7-1500 and ET 200MP stations. It reads M-switching signals from compatible switches and proximity sensors. The station CPU or interface module provides network communication; the input module is not a standalone controller or network interface.
Use the official terminal diagram to connect L+, M and the input channels through the separately ordered front connector. The nominal supply is 24 V DC, with a permitted range of 20.4 to 28.8 V DC. Check sensor polarity and the 1.5 mA maximum quiescent current for two-wire sensors.
Standard configuration occupies two input bytes. Module-internal Shared Input can expose the sixteen inputs through up to four submodules when the documented interface, firmware and engineering requirements are met. The fixed input delay is 3 to 4 ms; this basic module has no counter function or hardware interrupts.
Features:
- Exact article: 6ES7521-1BH50-0AA0
- Reading-M sensors and a separately ordered front connector
- Check station configuration, input timing and terminal assignment
The Siemens 6ES7521-1BH50-0AA0 sourcing input module requires the station, sensor polarity, front connector and wiring to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match the complete 6ES7521-1BH50-0AA0 order number and compare the installed module revision with the engineering project. Siemens identifies this article as DI 16x24VDC SRC BA. A similarly named 24 V digital input module is not automatically interchangeable: sourcing versus sinking circuitry, channel organization and supported station configuration must be checked.
Isolate the affected equipment under the site safety procedure before handling terminals or replacing hardware. Record the input addresses, front-connector assignment, L+ and M connections, sensor polarity and any Shared Input configuration. After replacement, test representative field signals and confirm that the process receives the expected channel states.
The current Siemens catalog lists this article as PM300 Active Product; this does not establish a future replacement or guarantee the supplied hardware revision. Confirm the exact quoted article and documentation before ordering. This basic module provides neither field wire-break monitoring nor hardware interrupts, so do not assume those functions during substitution.
Features:
- Match the complete 6ES7521-1BH50-0AA0 article
- Verify sourcing circuitry, front connector and station support
- Test channel states and any Shared Input configuration
The Siemens 6ES7521-1BH50-0AA0 sourcing digital input module requires replacement verification against the complete article, module version, station configuration and M-switching sensor circuits before commissioning.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Amikon reference PDFs are prepared from Siemens documentation; the manual package retains the selected original Siemens pages. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
Features:
- Three model-specific PDF previews are available
- Engineering software, licenses and project backups remain the customer's responsibility
- Accessories are supplied only when listed in the quotation
Documentation for the Siemens 6ES7521-1BH50-0AA0 sourcing digital input module must match the installed article and module version; check document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size15.10 x 15.10 x 4.70 cm (Siemens packaging)
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85389091; verify locally
-
OriginGermany; confirm label
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7521-1BH50-0AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does 6ES7521-1BH50-0AA0 use sinking or sourcing inputs?
Siemens identifies this module as sourcing, or reading M. Match the field device to the documented M-switching circuit and terminal diagram; do not choose a sensor solely because it operates at 24 V DC. -
Which Siemens stations support this input module?
The manual covers SIMATIC S7-1500 and ET 200MP. Use a compatible CPU or interface module and the applicable engineering configuration. Network communication is handled by the station CPU or interface, not by this digital input module itself. -
Is the front connector included with the module?
The front connector is ordered separately. The current Siemens product listing specifies screw-terminal or push-in options. Confirm the selected connector and the actual quoted accessories before ordering or installation. -
Can I connect two-wire proximity sensors?
Yes, provided the complete sensor circuit is compatible with this reading-M input. Siemens specifies a maximum permitted two-wire sensor quiescent current of 1.5 mA; check the sensor data and the official wiring diagram. -
Can this module count fast pulses or trigger hardware interrupts?
No. The manual lists no counter function or hardware interrupts. Its standard-input delay is fixed at 3 to 4 ms, so use appropriately specified hardware when the application requires fast pulse capture or interrupt-driven inputs. -
Does it detect a broken input wire or a short circuit?
No field wire-break or short-circuit monitoring is provided. The channel LEDs indicate input state, while RUN and ERROR indicate module status. An input value alone should not be treated as proof of healthy field wiring. -
Can more than one controller read the same inputs?
Module-internal Shared Input can copy all sixteen inputs into up to four submodules, subject to interface support. The manual requires module firmware V2.0.0 or later and, for catalog configuration, TIA Portal V13 Update 3 or later on PROFINET IO. Verify the actual installed versions. -
What should I check when RUN and ERROR are both off?
The Siemens status table associates this condition with missing or low backplane voltage. Check the CPU or system power supply, the U connectors and the permitted module count, following the site safety procedure before working on the station.
READY TO VERIFY YOUR PART?
Get a 6ES7521-1BH50-0AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
