PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-1500
- 6ES7532-5NB00-0AB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7532-5NB00-0AB0 Two-Channel Voltage Current Output
Siemens 6ES7532-5NB00-0AB0 is the SIMATIC S7-1500 AQ 2xU/I ST analog output module. It provides two voltage or current channels with 16-bit resolution and a minimum all-channel cycle time of 3.2 ms. Supported ranges include bipolar and unipolar voltage and current signals.
The module requires 24 V DC within a permitted 19.2 to 28.8 V range, with a maximum electronics current of 110 mA. It supports reparameterization and calibration in RUN. The listed delivery includes a push-in front connector, infeed element, shielding bracket and shield terminal; controller and field wiring are configured separately.
The module requires 24 V DC within a permitted 19.2 to 28.8 V range, with a maximum electronics current of 110 mA. It supports reparameterization and calibration in RUN. The listed delivery includes a push-in front connector, infeed element, shielding bracket and shield terminal; controller and field wiring are configured separately.
BEFORE YOU BUY
Confirm the complete 6ES7532-5NB00-0AB0 identity
ACTUAL APPLICATIONS
Application fields for 6ES7532-5NB00-0AB0
These broad application fields reflect the documented function and technical characteristics of 6ES7532-5NB00-0AB0.
-
01 · CHEMICALS
Industrial Chemistry and Petrochemical Energy
Petrochemistry and conventional industrial energyIndustrial chemistry and municipal water treatment -
02 · POWER GENERATION
Conventional Power and Renewable Energy
Conventional power and renewable electricity generationElectricity generation and industrial energy integration -
03 · OIL & GAS
Oil, Natural Gas and Renewable Energy
Oil and natural gas and renewable energyPetroleum and industrial thermal energy integration
Technical specifications for 6ES7532-5NB00-0AB0
-
Product Model6ES7532-5NB00-0AB0
-
Product ParametersTwo-Channel Voltage Current Output
-
In stock1 unit
-
ManufacturerSiemens
-
Analog output channels2
-
Rated output resolution16 bits
-
Rated supply24 V DC
-
Permitted supply voltage19.2 to 28.8 V DC
-
Maximum electronics current110 mA
-
Backplane power demand0.65 W
-
Typical power dissipation2.7 W
-
Voltage output ranges0-10 V; 1-5 V; -10 to +10 V
-
Current output ranges0-20 mA; -20 to +20 mA; 4-20 mA
-
Minimum all-channel cycle3.2 ms
-
Voltage short-circuit current maximum24 mA
-
Current-output no-load voltage maximum22 V
-
TIA Portal configurationV13; integrated from V13.0.2
-
RUN reparameterizationSupported
-
RUN calibrationSupported
View all additional
Alternative Names
6ES7532-5NB00-0AB0
SIMATIC S7-1500
Two-Channel Voltage Current Output
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7532-5NB00-0AB0 within SIMATIC S7-1500
Assign the AQ 2xU/I ST module in the S7-1500 project and select the voltage or current range for each channel. Use the 16-bit representation and the 3.2 ms minimum all-channel cycle in the program design. The output range is not freely scalable according to the product data.
Provide the 24 V load supply within 19.2 to 28.8 V and include both the 110 mA maximum electronics demand and 0.65 W backplane demand in the station budget. Connect the field wiring through the specified front-connector and shielding arrangement for the selected output type.
Use the supported engineering version and the applicable firmware configuration. Reparameterization and calibration in RUN are available, but their use must be planned within the plant change procedure. A 22 V open-circuit limit for current outputs is distinct from a commanded voltage-output range.
Features:
- Analog output channels: 2
- Rated output resolution: 16 bits
- SIMATIC S7-1500
Use 6ES7532-5NB00-0AB0 only within the documented SIMATIC S7-1500 arrangement and applicable installation instructions.
INTERCHANGEABILITY
Replace 6ES7532-5NB00-0AB0 within SIMATIC S7-1500
Record the full 6ES7532-5NB00-0AB0 code, firmware, channel modes and calibration settings before exchange. A two-channel S7-1500 output module with another resolution or range is not automatically interchangeable.
Identify the infeed and analog field connections at the front connector, including the shielding hardware. Follow the station procedure and retain the channel assignment and range information so voltage circuits are not reconnected as current circuits.
Restore the hardware configuration and check channel diagnostics, substitute values and each commanded output under a controlled process condition. Confirm the real signal at the receiving input and record any required calibration before restoring normal operation.
Features:
- 6ES7532-5NB00-0AB0 complete order code
- RUN calibration: Supported
- Retain the documented SIMATIC S7-1500 connection arrangement
Use 6ES7532-5NB00-0AB0 only within the documented SIMATIC S7-1500 arrangement and applicable installation instructions.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Exact-model technical data for 6ES7532-5NB00-0AB0
- Document applicability checked against the complete identity
- Directory links by subcategory and brand
Documentation for 6ES7532-5NB00-0AB0 must match the installed product identity and supplied configuration.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size2.50 x 14.70 x 12.90 cm
-
Net weight0.20 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7532-5NB00-0AB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What signal types does 6ES7532-5NB00-0AB0 provide?
6ES7532-5NB00-0AB0 has two configurable voltage or current output channels, including 0-10 V, 1-5 V, +/-10 V and the listed current ranges. -
Is 6ES7532-5NB00-0AB0 an eight-channel analog module?
No. 6ES7532-5NB00-0AB0 is the AQ 2xU/I ST module with two output channels. -
What update limit is stated for 6ES7532-5NB00-0AB0?
The 6ES7532-5NB00-0AB0 minimum all-channel cycle time is 3.2 ms, independent of the number of activated channels. -
Can 6ES7532-5NB00-0AB0 be recalibrated while the CPU remains in RUN?
The product data lists calibration and reparameterization in RUN as supported for 6ES7532-5NB00-0AB0; apply the site change procedure. -
What DC feeder range is allowed for 6ES7532-5NB00-0AB0?
6ES7532-5NB00-0AB0 requires 19.2-28.8 V DC around its 24 V rating. -
Which TIA Portal generation supports 6ES7532-5NB00-0AB0?
The 6ES7532-5NB00-0AB0 data sheet lists configuration from V13 and integration from V13.0.2. -
What front-connection items are listed with 6ES7532-5NB00-0AB0?
The 6ES7532-5NB00-0AB0 delivery description includes the push-in front connector, infeed element, shielding bracket and shield terminal; confirm these items in the quotation. -
Which configuration details should a distributor request for 6ES7532-5NB00-0AB0?
Obtain the full 6ES7532-5NB00-0AB0 label, firmware requirement, two channel modes and any required calibration record to match the installed output arrangement.
READY TO VERIFY YOUR PART?
Get a 6ES7532-5NB00-0AB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6ES7532-5NB00-0AB0Two-Channel Voltage Current OutputManufacturer: SiemensView Details
-
6SL3210-1KE14-3UF2G120C 1.5 kW Compact InverterManufacturer: SiemensView Details
-
6SL3210-5FE12-0UF0V90 PN 2.5 kW Servo DriveManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
