PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-200 SMART
- 6ES7288-5DT04-0AA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Two additional inputs and two transistor outputs within the CPU
Siemens 6ES7288-5DT04-0AA0 is the SB DT04 digital signal board for a compatible S7-200 SMART CPU. It adds two nominal 24 V DC sinking inputs and two sourcing transistor outputs through the CPU's signal-board position, rather than a separate expansion-module housing.
Each input has individually selectable filtering, while the output pair shares a 1 A common limit and a 0.5 A limit per point. The six-position connector brings together the two outputs, two inputs and field supply, with the exact terminal order defined by Siemens.
Each input has individually selectable filtering, while the output pair shares a 1 A common limit and a 0.5 A limit per point. The six-position connector brings together the two outputs, two inputs and field supply, with the exact terminal order defined by Siemens.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Industrial Production and Service Sectors
These industry examples describe Siemens' broader market coverage, not verified installations of this exact product. Product suitability depends on the documented configuration and engineering requirements.
-
01 · TEXTILE MANUFACTURING
Natural and Manufactured Fibers
Natural fiber production and processing within the textile industry.Manufactured fiber production for the wider textile manufacturing sector. -
02 · FOOD & BEVERAGE
Dairy, Bakery and Confectionery
Dairy production and processing within the commercial food industry.Bakery and confectionery manufacturing across diverse consumer food categories. -
03 · WATER & WASTEWATER
Drinking Water and Wastewater Services
Drinking water production for public and community supply services.Wastewater treatment serving households, communities and industrial water users.
Technical specifications for 6ES7288-5DT04-0AA0
-
Product Model6ES7288-5DT04-0AA0
-
Spare ModelSIMATIC S7-200 SMART SB DT04
-
Product ParametersSB DT04 Digital I/O Board
-
In stock1 unit
-
ManufacturerSiemens
-
Digital inputs2
-
Input typeSink; IEC Type 1 sink
-
Nominal input voltage24 V DC at 4 mA
-
Logic 1 minimum15 V DC at 2.5 mA
-
Logic 0 maximum5 V DC at 1 mA
-
Input filteringIndividually selectable: 0.2, 0.4, 0.8, 1.6, 3.2, 6.4 or 12.8 microseconds or milliseconds
-
Digital outputs2 sourcing MOSFET transistor outputs
-
Output voltage range20.4 to 28.8 V DC
-
Output current per point0.5 A maximum
-
Output current per common1 A maximum
-
Output overload protectionNot provided
-
Switching delay2 microseconds maximum off-to-on; 10 microseconds maximum on-to-off
-
Output behavior in STOPLast value or substitute value; default substitute is 0
-
5 V DC current consumption50 mA
-
Power dissipation1.0 W
View all additional
Alternative Names
Siemens 6ES7288-5DT04-0AA0
SIMATIC S7-200 SMART SB DT04
SB DT04 digital input/output signal board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
CPU SIGNAL-BOARD EXPANSION
Add a small digital I/O set in the available board position
The DT04 fits the signal-board position of a compatible S7-200 SMART CPU and provides two inputs plus two outputs. It is therefore a different expansion format from a side-mounted EM. Check the actual CPU model and its occupied board position before allocating these additional channels.
Both inputs are documented as sinking inputs, with individually selectable filters in microsecond or millisecond ranges. The sourcing transistor outputs have separate point and common limits. These input and output characteristics should be matched to the signal list rather than inferred from the four-channel total.
The X19 connector combines output, input and field-supply terminals in a defined sequence. Logic consumption is listed separately at 50 mA from 5 V DC. The project also specifies output behavior in STOP, so configuration and electrical connection checks remain linked when introducing the board.
Features:
- CPU-mounted two-input/two-output board
- Individual input filtering
- Exact X19 signal and supply mapping
The Siemens 6ES7288-5DT04-0AA0 requires the documented hardware configuration, installation conditions and interface arrangement to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Confirm the full DT04 order number and identify the installed host CPU before preparing the replacement. A similarly sized analog or communications board serves a different function, and some SMART CPU variants do not support signal boards at all. The occupied CPU position must also be checked.
Retain the two input assignments, individual filter selections and output STOP settings from the existing project. Check that the connected signals match sinking inputs and sourcing transistor outputs. The documented 0.5 A point rating and 1 A common rating both remain relevant to the replacement assessment.
Compare the X19 wiring with the complete manufacturer drawing, including the two supply terminals. The board has no internal output overload protection, so external circuit protection remains necessary. Installation and removal require power isolation and the qualified-personnel procedures in the Siemens documentation, not only a connector match.
Features:
- Host CPU and occupied-slot check
- Input polarity and output limits
- Project configuration retained
The Siemens 6ES7288-5DT04-0AA0 requires replacement verification based on its complete order number, installed hardware, signal configuration and project documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
Features:
- Exact-model manufacturer data and relevant original manual pages
- Verified manufacturer product reference; separate installation document not supplied
- Accessories and supplied documentation follow the written quotation
Documentation for the Siemens 6ES7288-5DT04-0AA0 includes an independent technical summary and selected original manufacturer pages; check the applicable document edition against the delivered product and approved installation documentation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm final packed dimensions
-
Shipping weightConfirm final packed weight
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginConfirm supplied-unit origin
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7288-5DT04-0AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is SB DT04 an external four-channel expansion module?
It is a signal board installed in the CPU's designated board position. Its four channels comprise two inputs and two outputs, not four inputs or four outputs. -
Are the two inputs sink/source like some SMART expansion modules?
The exact DT04 table specifies sinking inputs, IEC Type 1 sink. Do not carry a sink/source description over from a different expansion-module table. -
Can both input filters be configured separately?
Yes. Siemens lists individually selectable filter times for each of the two input channels: 0.2, 0.4, 0.8, 1.6, 3.2, 6.4 and 12.8 in either microseconds or milliseconds. Select the documented step needed by the project. -
Are the two output channels relay contacts?
No. They are sourcing MOSFET transistor outputs with a 20.4 to 28.8 V DC operating range. Relay-contact voltage ranges from other SMART modules do not apply. -
Does 0.5 A per output remove the shared loading limit?
No. The output point limit is 0.5 A and the common limit is 1 A. Check connected load types and the surrounding protection design as well as the individual channel rating. -
Can the board be installed on every S7-200 SMART CPU?
No. The installation section explicitly excludes CR20s, CR30s, CR40s and CR60s from signal-board use. Verify the actual host CPU and available board position before selecting this accessory. -
Which connector carries the field signals?
The board uses X19: the manufacturer table identifies two output positions, two input positions, L+ and M. Use the exact drawing rather than an adjacent analog-board or communications-board pin assignment. -
Is the board protected internally against an output overload?
The output table lists no overload protection. Review external protection and configured STOP behavior, and isolate the CPU and related equipment before any board installation or removal.
READY TO VERIFY YOUR PART?
Get a 6ES7288-5DT04-0AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6ES7288-5DT04-0AA0SB DT04 Digital I/O BoardManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
